General :: How To Install CyanogenMod 9 Or 10 On RK 3066 Device
Feb 5, 2013I need to instal CyanogenMod 9 or CyanogenMod 10 on RK 3066 device (Cortex A9 Dual Core, 1.6GHz, GPU Mali-400). how to do it?
View 1 RepliesI need to instal CyanogenMod 9 or CyanogenMod 10 on RK 3066 device (Cortex A9 Dual Core, 1.6GHz, GPU Mali-400). how to do it?
View 1 RepliesHow to install cyanogenmod in unsupported device (in here i'm using Advan Vandroid E1C [from Indonesia]) ? I had to reading how to port, but i still don't understand how to install it.
View 1 Replies View Related Rockchip 3066 TV Box I am working with. The situation is thus:
I have a number of these boxes, 12 in my possession currently with more on the way
I have successfully rooted the boxes through ADB, none of the one click or other methods worked, but rooting through ADB did.
I have tried using rkdump but unfortunately it cannot find the update.img which I assume to mean it doesn't have one.
What I would like to do is setup a box exactly how I want and then image this off and copy the image to the others
As I mentioned, even though it's a Rockhip based chipset, there's no way I can identify to extract any kind of update.img from it. I have seen through other postings that some of the 3066 based boards no longer use the same cramfs file header/structure the previous 2xxx chipset used so this is probably why.
The big thing is, I just want to mirror the setup to other hardware of exactly the same pedigree.Here is the MTD/partition map:
Code:
1|root@android:/dev # cat /proc/mtd
dev: size erasesize name
mtd0: 00400000 00004000 "misc"[code]....
what the precise format of the copy to and from commands should be assuming this is the way to go about it?
There's a number of applications that ship on the box by default too I need to remove as root, and I'd like to automate everything, hence the idea of imaging as opposed to stepping through all the tasks manually.
My current GS3 apparently had water damage, and a new one is coming from the insurance tomorrow. I figured that since the warranty is up and the insurance won't replace it again, I may as well finally root and flash a custom rom. From my poking around the internet, I like CyanogenMod 10.1. I am on AT&T.
I've only attempted a root once before with this current phone, which I think worked, but I abandoned the project months ago and don't remember. In any case, besides that, I've never rooted or flashed a rom before.
After further poking around on the internet, these are the sources I'm planning on using to successfully root and rom:
Rooting: How to Root the Samsung Galaxy S3 " XDA Developer TV " xda-developers
And for the ROM, I'm going to follow this video:
I understand that after rooting, I have to create a backup (using that Titan Backup app in the video I think?" and i am going to use Goo Manager to download the ROM and gapps. I saw another video that had me move files from the computer to my phone, but they didn't do any backing up, and apparently that's necessary.
What does it mean to "trip a flash counter"? And what is a toolkit, and do I need it?
I have an intenso tab714 with android 4.0.4 and I can't find a guide to install cm and cwm recovery on this tab.Also rom manager can't automatically install the cwm.TAblet is rooted.I downloaded cm9 and cmw recovery .zip but I do not know if they are safe to use on my tab.
View 3 Replies View RelatedI have a x26i mtk6575.
-rooted
-4.0.3 ICS
-mtk6575
I wana keep this updated so others who have a mtk6575 can read this and install Cyanogen Mod.
I tried to install cyanogenmod 9 on sony xperia ray. I got everything working with the exception that the phone can't register on the GSM network. I read some posts and I think I need to flash the baseband.
View 1 Replies View RelatedI had cwm recovery rom running, but i did not install it. then i installed cyanogenmod. now recovery is cyanogenmod, but i want it to be cwm recovery.
when i boot into recovery, i get cyanogenmod. adb and fastboot commands do not seem to be working. like i cant switch to fastboot via adb reboot bootloader. (is that because i flashed the custom rom???)
google play is not installed yet either because adb and fastboot isnt working like it was before i flashed cyanogenmod. i was going to try to download the cwm rom manager again to install (permanently) cwm recovery rom.
I was trying to install CyanogenMod, but now it wont boot. It's just boot with a 'circle'logo, and nothing happends.
Please see my video on youtube: [URL]...
Is there anyway I can get back to get my phone back to working again? I have tried to hold down VOLUME UP and Powerbutton with USB-cable in, but still the circle-logo
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
I've tried downloading it many times but failed
I have a galaxy sII (i91000) and i really want the stock calendar apk from the galaxy sIII. I searched xda before but there are like 3 apk's for it. splanner.apk, seccalender.apk and seccalendarprovider.apk but i dont know which is which.
how i manage to do that?
Device: Samsung galaxy i9100 sII
Rom: CyanogenMod 10.1 nightly
Recovery: CWM 6.0.2.9
Apps: ES File explorer, titanium backup and superuser
I have 3 Galaxy Player 5 ( YP-G70 with 3 capacitive buttons ), only one of the actually have a working rom that i flashed a while ago.
The other two have a different rom that only have the back and menu button working ( the home button doesn't respond )
Is there a way for me to take the Rom and kernel off the working galaxy player so i can install it into the other two ?
Why I cant install it? Its say operation aborted! I try 3 times already.
View 5 Replies View RelatedAlright so my phone has been rooted for a while now and I have been running Koush's Cyanogenmod for the DInc for a couple weeks. Now I was wondering how do I get themes for these ROMs and how do I install them?? I have seen people on the XDA forums theme their DIncs and they said something about metamorph but I have no idea what that is.
View 2 Replies View RelatedI have a samsung galaxy young s6312, stock android 4.1.2 jellybean, rooted. I want to install asphalt 8 (about 1.6 gb) on my device. But the problem is that even if I factory reset my device, the maximum free memory I can get is 1.48 gb as my device internal memory is 1.5 gb. I have an external sd card of 8 gb. so how can I install the game with its data DIRECTLY on the external sd? My device is rooted and busybox installed..
View 2 Replies View RelatedIs there a way to install APK's from any of the bootloader menus? I can install through ADB if the device is fully booted & I have enabled USB Debugging. Is that the only way?
If that IS the only way, is there a way to reset the device's "first boot" attribute back to true after the first boot, so that the manufacturer's setup software runs on the next boot?
how do i install apks from other devices? i am trying to install sonyericsson timescape on mi700 with no success.
View 1 Replies View RelatedI have never been able to install Motorola Device Manager on 3 different computers. My problem is just like this Motorola Device Manager won't install!!! except when I click on the link in post #12 (#1 on the list in that post) it says the troubleshooter is not available.
View 2 Replies View RelatedI own an acer liquid mini with custom rom. when I try to install an application from the play store, I get an error: Not enough space on the device. But I have 100Mb of free space. I tried to solve this problem wiped cache, and it worked. So I went to the play store, and I downloaded an app. When it finished the download, I get another error: Package files is invalid. I tried to reflash the rom, wiped cache, wiped delvik cache, wiped all. But the error there is always.When I try to install an .apk on my device, I get this error: "application is not installed".
View 3 Replies View RelatedI have several android tablets, all but one (at this moment) are rooted. I am not interested in putting a custom rom on them at the moment (mainly because not all functions -like camera- are working on all devices) but I would like the ability to do a Nandroid backup that seems to be only available with custom roms. On one device I can't unlock the bootloader (Azpen A701), don't know about the unrooted one at this time (brand new Hisense Sero 7 pro).
Is there a way to add CWM to a rooted stock android (only root applied and associated superuser/busybox apps installed)? What are the requirements (unlocked bootloader?)? Where to get said CWM and how to install it?
I have xperia s (st25a) phone with android 4.0.4.
I already have rooted it (SU installed) and bootloader unlocked. Fastboot reports the correct version "5".
However, when I try to install TWRP, it gives the following error:
>fastboot.exe flash boot stock-6.1.A.0.452-twrp-2.4.0.0.elf
sending 'boot' (8124 KB)...
FAILED (remote: The Device must be rooted first)
Why does TWRP think it's not rooted? I have setup SU to grant every root request too!
Another issue - when I try to enter recovery with stock image, my phone gets stuck on boot with Sony logo and I have to remove battery to shut it down. Why wouldn't stock recovery work?
I'm trying to "install zip from sideload" using ClockworkMod on AT&T Fusion 2.
At the CMD I type: adb sideload cm-10.1-20130602-NIGHTLY-u8665.zip
And get this error: more than one device and emulator
Is it possible to intall Factory Images for Nexus Devices [URL] ..... in any device? I am using Karbonn Titenium S2.
View 4 Replies View RelatedI have a MT6577 Android ICS device. I want to update it to Jelly Bean. How would I do that.
View 1 Replies View Relatedi recently discover that i couldn't install google play services on my phone.when i try to install them it loads up to the end and when it says "Installing..." the following message appears:
"Incompatible with other application(s) using the same shared user ID"
I have recently purchased a pendo pad http:[url].... and it has a getjar apps store on it instead of google play, I have attempted installing the gplay store on the device with the .apk and that didn't work.
View 1 Replies View RelatedHi there all, I download a app GPS.apk for my GPS test. I can install it to my emulator using "adb install GPS.apk",but how can I install it in my real device?
View 3 Replies View RelatedI've published an app today mainly for my forum users to use, just a very simple app that displays wallpapers derived from the forum.
Problem I'm having is one guy says it doesn't appear in the market, and I've even sent him the APK to install manually but it fails.
My minimum SDK version is 4, I created it with the 1.6 SDK specified so not sure why he can't see it or install it. He has a 1.6 Magic handset.
So just wondering if anyone has any ideas, the app is called bocn wallpaper, it uses internet and set-wallpaper permissions.. but I wouldn't have thought the permissions were the problem...
I know you could normally just download Astor file manager and install it off of there, but my mom is getting an android tablet (yes the $150 one from k mart) and she really wants the kindle app on it.And i read somewhere that whenever you try to open the market it force closes on that certain tablet.
View 2 Replies View RelatedI am developing application using Eclipse. My friend has HTC Hero and I am trying to run my application on it, but it says that the application could not be installed. I did the steps which are described in Android DevGuide. I.e. exported my app with the generated key. Am i right assuming that this is enough? As i understand eclipse signs and aligns application automatically when selecting Export.
View 4 Replies View Related