General :: Cannot Get Odin To Get Past SetupConnection?
Feb 28, 2012
I have tried everything on my wife's I9001 but I cannot get Odin to get past SetupConnection.Here is a picture:
I have tried:
Redownloading Odin 1.3 and 1.85 and also tried using Multi Downloader 4. (Which says that the .md5 file isn't supported).
Changing USB ports.
Using a Jig to boot Download mode.
Booting into Download mode normally.
Installing MobileODin except that I9001 is not supported.
Trying to flash a different rom other than 'I9001XXKQ1_I9001XXKPI_I9001DBTKP1_HOME.tar.md5'
Rebooting the computer over 9000 times.
Rebooting the phone over 9000 times.
Pulling the battery over 9000 times.
Reinstalling the drivers from Kies.
Turning USB Debugging mode off (was worth a try)
Using a different computer.
Reinstalling my OS (seriously, I had to do that anyway)
Leaving the phone plugged in for 30 minutes anyway just to see if it was working but not updating.
I am unable to boot into 'Recovery Mode' also the phone sh!ts itself and boots into 'RAM Dump' instead... where it requires a battery pull to reboot. So I can't even put the rom file on the internal memory and use recovery mode to flash it from there...
Basically nothing works at all. Odin 1.35 fails, Odin 1.85 fails, Multidownloader fails. I have tried rebooting, restart, and re-bloody everything I can. I have no idea why it won't get past setup connection. I've even tried using my second USB cable. It used to work fine, I used to be able to flash the phone fine.
Kies is NOT running in the background... there are no processes open or anything. I have googled and yahooed and everything to find a solution to this. NOTHING works.. I need to flash this dhfshfgdshgfshs phone as soon as possible. It's not working properly and it's really unstable..
View 6 Replies
Jan 15, 2014
I just restored my factory image with Android 4.4.2 and then flashed Cataclysm ROM and just a few moments ago I was setting everything up and then started messing with AdAway. I was having trouble with applying the host file but got it working by turning on ADB in developer options. When I rebooted for about the 2nd time the battery started to not go above 0% (it recently shut off right as it was applying a host file)... I got it back on and it wouldn't go above 0%. I took off the charger for a second and it shut off right away after it was on the charger for about 5-10 minutes. Now the red light is blinking while its off and charging but I can't get it to turn on, even when taking out the charger and making the red light go off. I haven't tried rebooting into bootloader yet, and right now it's just sitting on the charger with the red light blinking.
UPDATE: I got it ON, but it won't charge past 0% and right when I take it off the charger it is going to shut off. Should I delete the battery stats file? If so, where is it?
View 1 Replies
View Related
Jan 11, 2013
compile a ROM based on CM10; what would make that ROM go into a never-ending boot animation on a clean flash (wipe data/cache/dalvik), yet boot up without a problem when dirty flashed over a CM9 variant. One might think that since a dirty flash over CM9 works, what about dirty flashing over a CM10 variant? What if it acts just like performing a clean flash and never gets past the boot animation?
Lets compound this by adding that once a successful boot-up after the dirty CM9 flash has occured; if one goes into recovery and wipes data/cache/dalvik, the ROM goes back into a never-ending boot animation.
View 9 Replies
View Related
Jan 29, 2013
My Huawei Activa 4g was rooted and all was well. I went to change the DPI with the DPI Modded app from the play store, and its all screwed up now. I can't get past my lock screen, it only shows the clock and the emergency call button. I can't swipe the dots, and they aren't just invisible. I was dumb and deleted my backup.
View 3 Replies
View Related
Apr 22, 2012
can't get past security password to connect to wifi at hotel. I am for sure typing the right password. Do I have to turn a phone setting off
View 3 Replies
View Related
Nov 24, 2012
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
View 6 Replies
View Related
Jan 22, 2013
My samsung galaxy S3 is brand new and it wont download apps from the play store it gets to about 30% and then it stops everytime. if i connect to the wifi it works np, the wierd thing is it will let me update my apps on the mobile network but not download a new one. I have tried updating the phone, factory reset, stopping framework and removing google id and restarting the phone. I also tried putting my sim card in another Samsung Galaxy S3 but it still wouldn't download i then tried calling virgin and getting them to send me the apn details which i then installed but this was unsuccessful, so i went to the virgin store and they told me to get a new sim card, so i did but still it dosent work!!!
View 3 Replies
View Related
Feb 19, 2013
I'm quite worried I soft bricked my phone. I am new to a rooted android device. I am more used to an unlocked windows mobile. Here is what I did...
I rooted my handset using blackwofls guide, it worked perfectly. I then installed adfree android from the market, it also worked perfectly. After that, I went and got font installer, it installed like any other app, opened fine. I chose a font I wanted to use, previewed it, and installed it.
It had prompted me to reboot for the font to take effect. After rebooting my phone will no longer go past the AT&T splash screen. I am very worried since I do not know how to fix it, I don't have a backup of my ICS of any sort. I can however get into ODIN and the recovery mode of clockwork.
I reset my cache and data numerous times, and i did a factory reset, It just sits at the splash screen and vibrates often.
View 2 Replies
View Related
Nov 17, 2013
My friend gave me this tablet because he couldn't get it to work, and now I'm trying to fix it. I'm pretty sure he tried to root/install google apps on it, but not exactly sure what he did and did not do.
I started by trying to just reset the firmware by booting into recovery and choosing a factory install. It was not able to do it because of an error reading the cache files. There was also an option to reset the cache files, but this threw the same error. Because of this, I also cannot install from an SD card. Along with this, USB debugging had not been enabled, so I can't use ADB to sideload a new bootloader or firmware onto it.
View 1 Replies
View Related
May 11, 2012
I am currently working on a video player using the VideoView and I am controlling it with the MediaController.
The first thing I would like to do is to be able to place markers along the seekbar, such as 25% of the clip. I want to fire an event when this mark is hit or scrubbed past. Throwing an event when this marker is hit with the video playing regularly will be easy because I should be able to just use getCurrentPosition and checking to see if it is 25% of the total clip. The issue I am having is how to fire the event if the user scrubs past the 25% point.
The second thing I am trying to do is just show a visual marker along the seekbar that I can display a marker, lets say at the 25% point, 50% point, etc.
View 1 Replies
View Related
Jul 5, 2012
Is it possible to flash a zip Rom using Odin? I need to flash a zip. HTC Explorer A310e
View 9 Replies
View Related
Oct 21, 2011
I have a rather new phone, 2 weeks at most. I have rooted it, and am now trying to get it on odin. We have two bricked phones to work with, Download mode still works with both. I have dumped all partitions in /dev/block.I am working on the OPS file. I found this in the I believe Odin image. I think it's the OPS but I don't know.
here is the lines cleaned up this is the exact order I found it in from the image.
MIBIB
SIM_SECURE
FSBL
OSBL
NVBACKUP
AMSS
EFS2
APPSBL
DSP1
QDSP_Q
CPFOTA
boot
recovery
parameter
system
userdata
cache
View 2 Replies
View Related
Apr 29, 2013
Does mobile odin support galaxy y?
View 2 Replies
View Related
Apr 8, 2012
is it possible to flash any stock 4.0.3 rom with odin?
View 2 Replies
View Related
Jun 22, 2013
My phone(Samsung Galaxy GT-B5510 (Galaxy Y Pro/Galaxy TXT)) was totally bricked, I couldn't turn wifi on, nothing worked.After I searched some forums I found how to un-brick it by loading the original firmware.
I live in Belgium, and I couldn't find a firmware with the Belgian CSC("PRO"), so I used a Netherlandish-one.Everything went fine and I can use my phone again, everything works, except that the AZERTY-keyboard functions as a QWERTY-one(the default for Netherlands).
Anyways, my phone works fine without a SIM-card. Whenever I try to boot my phone with a SIM inserted, it gets stuck in a bootloop, showing the Samsung-image for about 15 seconds and then rebooting and so on.
So after I thought a bit, I figured out the problem must be that I'm not using a Belgian CSC (my SIM is from Belgium too).
I tried restoring my phone with Samsung Kies, but whenever I click Start upgrade, I get a Chinese error.
However, I have found the location where Kies downloaded the firmware, and the firmware is with a PRO-csc(the one I need), it's located in
C:Users{me}AppDataTempBinaryGT-B5510.
So I tried flashing this Kies-firmware with ODIN, but the problem is that the Kies-firmware has no extension(no .tar.md5 or whatever), so I can't import it with ODIN.What do I do?
View 7 Replies
View Related
Feb 14, 2012
I bricked actually my phone.
I want to know now, wich is actually the best Android 4.0.3 ROM.
I know how to flash via zip and via odin.
I dont know how to flash kernel
I wanna use a Android 4.0.3 ROM with DarkKnights or Siyah Kernel, tell me what you think about it.
First flash the ROM then Kernel?
View 6 Replies
View Related
Nov 12, 2012
So, my question: Is it possible to turn a rom from Odin format (.tar/.tar.md5 etc) into a flashable zip? If yes, how?
My intention was to customize a stock rom for the gt-s7500, with dsixda's kitchen, that apparently supports only flashable zips.
View 1 Replies
View Related
Jul 18, 2013
im trying to root my Gs3 i747!! My usb mini port got bad so i got it replaced and now it wont connect to computer! not even in download mode it doesnt even show the icon on notifications. I tried framaroot, Ezinox abuse, root Z4, thru terminal with motochopper method and nothing!! my gs3 is 6 months old but i lost warranty, My only chance to build a method for the i747 gs3
View 9 Replies
View Related
Apr 18, 2012
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
View 1 Replies
View Related
Jun 10, 2013
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
View 7 Replies
View Related
May 26, 2012
my phone bricked(show at samsung logo), and i try to use odin 1.85 with pda.tar on this link http:[url]....when i click start on odin the thread show up.. what i need to do..
View 1 Replies
View Related
Mar 5, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 2 Replies
View Related
Oct 20, 2013
how to FLASHING my Galaxy Mini without ODIN (via PC). because my pc didn't detect my phone. me already try on windows XP, Seven, and Eight. i dont know why this is happen.
my point is.. i just want to flash my galaxy mini without PC/ODIN.
View 4 Replies
View Related
Apr 16, 2012
I have new firmware on PC for my Samsung phone, intended for flashing with Odin (i have PHONE, CSC and PIT files). My question here is, is it possible to root this firmware before flashing it. The case is, my phone is now rooted and I don't want to loose root access, but I would like to flash this new firmware, cause with this one i have occasional problems (force close of apps, freezes, loosing wifi connection, etc). I've searched every where but haven't found anything. Only Mobile Odin have such options, but my phone is not supported yet.
View 1 Replies
View Related
May 17, 2014
I was wondering if it is in some how possible to upgrade my GT-I9070 from gingerbread 2.3.6 to Kitkat or other custumized rom without having to use odin.
I have a problem with connecting my phone to the my pc, my laptop won't regonize it, I think is a hardware problem.
View 3 Replies
View Related
Aug 5, 2013
I'm trying to restore my galaxy player 5 back to stock using odin because it wouldnt boot. (boot loop) after i flash i get the samsung boot but it just keeps restarting over and over. and when i try to wipe data in recovery it asks for a password and what its supposed to be. i had screen lock disabled but i might have still had a password stored.
View 1 Replies
View Related
Apr 22, 2014
I removed the OS from my N7100 after I messed up with a kernel. Now im trying to reinstall the cyanogen mod but my computer doesnt recognize the phone, and so my only way of flashing anything to the phone is by using Odin, which only accepts .md5 files. I also have Clockworks Mod Recovery but like I said, my computer doesnt recognize my phone as a device
How can I flash cyanogen mod via Odin? When I download it from the official website its not in .md5 format, it's a .zip.
View 1 Replies
View Related
Mar 19, 2012
I've updated my Galaxy S II to ICS via Odin but wanted to erase my flash history so flashed an old bootloader .tar file, erased the flash history but now want to flash the ICS bootloader back.I've extracted the sbl.bin file but cannot create a tar file that Odin recognises. Have tried using 7zip but Odin locks up when I try and flash it.
how to create a flashable .tar file.
View 1 Replies
View Related
Jan 6, 2012
I am unable to flash back my GT-9100 firmware back to its original state as i flash a modified PDA, Phone and CSC files into it.
The problem that i faced is i am unable to select which files for which section of Odin after downloading the ROM from Infratech's post.
[URL]
Basically i do not know why the files came out this way.
Anyway the files that i having now is GT-I9100_XME_I9100DXKH2_I9100DXKH1_I9100OLCKH1
View 4 Replies
View Related
Mar 7, 2012
I just OV galaxy by setcpu but have problem phone was stopped working. So i need ROM stock version VietNam or CM7 for retry up ROM flash by odin.
View 1 Replies
View Related
