My android tablet will power on, but after the little green guy goes away it goes to the screen where is only says android and it flashes through the letters. After a couple times it wil stop flasing in between the d & the r. Then keeps doing that.
View 3 Replies
I cant find any app that automatically turns off your phone after your phone is done charging, or after a set amount of time its fully charged..does anyone know of such an app? does it even exist?
View 7 Replies View RelatedSo awhile back my tablet was acting up and being slow. So I held down the power button to reboot it but when I try starting it back up again it goes through the normal process up until a black screen with the word android that is in blue and is flashing. It always stops here. Also whenever I plug it into my computer it just says that there is no driver found I have a MID M9000 9" Android 4.0 Capacitive Touch Tablet PC - 1.2Ghz, 8GB, 512MB, Wi-Fi (White) The picture is where the screen is stuck
View 3 Replies View RelatedI connect my GNex via MHL to my TV. I also have a Nexus 7. Is there any possible way to use my N7 as a remote control/bluetooth keyboard to control my GNex? Run a VNC Server on the phone and a VNC Viewer on the tablet, but this is laggy.
View 4 Replies View RelatedI have an Ematic tablet, which I got around Halloween. Basically, it's worked fine since then. Though, for the last week, it hasn't charged or turned on. There's no damage to the AC adaptor, and I've never had problems with it charging before. Now, it only "charges" (even though it technically isn't) in certain places.
Model number : EGS109BL
Link to the tablet : Ematic Edan XL 9 inch Tablet with 8GB Memory EGS109BL - Best Buy
Is there any way to tether all of an android phone's capabilities to a tablet?
For reference, i'm not talking about wifi, i'm talking about turning a tablet into a phone using a phone. if that makes sense.
what I'd like to do is make/recieve calls/texts on my tablet using my phone. Not using some macguyver method of using google voice or any other service, but legitimately connecting the phone to the tablet to use it's phone number and everything.
I'm trying to mirror my MacBook to my TV, but I don't have an Apple TV. I've heard of HiFi Speaker, but that's just for music...
View 1 Replies View RelatedI bought tablet GoClever Terra 72 7 days ago and my battery was dead and i put it on the charger last night and now it wont turn on. I don't have volume buttons to enter a recovery mode, i can't access tablet with computer, when i put it on the charger or usb it become heat up. I can not get the screws out because it is under warranty.
View 4 Replies View RelatedI cant turn my tablet off or get it to work it is stuck on the screen saver,what do I do
View 7 Replies View RelatedI bought a bricked Bruneau tablet and wanted to stock flash it. But the "script" named folder that i put it on the sdcard was for other kind of wonder media processor. I have a WM8505+ procesor and the software was for WM8605. Now the tablet does not turn on, black screen, no sound nothing. I saw on other forums and youtube that i can shortcircuit 2 pins from a Samsung chip on tablet motherboard but it`s not working.
View 1 Replies View RelatedMy Dad is looking into buying my Asus TF101 off me to use as an in-car navigation and entertainment system.
One thing I would like to try and do for him is set up something that will turn the tablet off automatically after the car is turned off. The tablet will be permanently connected to the 12V cigarette lighter socket via car charger. I currently use Tasker to automate many things on my phone and the tablet, and any experience in using it to turn a device off say 10 minutes after the charging source is removed (car turned off).
The phone pops up an alert when the battery is fully charged, saying to unplug. First of all, is there a reason for doing so? (Is it bad to keep it plugged in once it's fully charged?) Also, is there a way to disable this or at least make it quiet (without having to silence the entire phone), so it does not wake me up?
View 8 Replies View RelatedI rooted my phone back before 2.2 came out. I've played with CWM, made Nandroid and Titanium backups, removed bloat and installed most of the root only apps. What I haven't done yet is flash a ROM. This is mainly because it seems that while there are a crap ton of ROMs being developed out there all of them seem to either not be fully stable or are missing some sort of key feature (camera, videocam, bluetooth, LED, internal storage, etc).
Are there any ROMs that you folks are currently using that's stable and has all the features of the phone working? If not, what's the closest one that you've found?
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedI got a new moto g about a week ago and it worked like a charm, but yesterday it started doing something wired, the battery indicator always shows that the phone is fully charged, to the point where it shut its self down because it run out, and still showed battery fully charged.
View 4 Replies View RelatedI've attempted to root my girlfriends phone for her so I can unlock it, but the phone just wont root. I've tried superoneclick and a ton of other 1 click roots along with the manual rooting at first (where you go into recovery mode and apply the update from the sd card).
I can see the superuser app, however I cannot grant superuser access to any apps. The version is v2.3.6 and if it makes a difference, it's an irish phone locked to use meteor (a network).
I've also downloaded rootchecker from the play store and it says that I do not have "proper root access to the phone" or something similar. Proper was the predominant word though.Whenever I use superoneclick, the application always freezes as well.
I can do the unlocking half of it myself, I just need root access..Also, when in recovery mode, this comes up in yellow at the bottom.
I did a full wipe of my phone to see If I ccan get rid of cyanogen mod. Now I have no sdcard folder. and I'm stuck in the TWRP menu. Is their anyway of getting my phone back? I have AT&T. I have no android software nothing. but in filemanager It finds a couple folder mostly all empty. Did I void my warranty? Will I never get my phone back?
View 3 Replies View Relatedmy phone is fully charged but cannot boot
it showns this symbol when charing when i unplug,cannot boot
i cant even boot so cannot go into recovery
Is there a way to install APK's from any of the bootloader menus? I can install through ADB if the device is fully booted & I have enabled USB Debugging. Is that the only way?
If that IS the only way, is there a way to reset the device's "first boot" attribute back to true after the first boot, so that the manufacturer's setup software runs on the next boot?
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
My specific device is a GSM Galaxy Nexus.
So, I have 3 batteries for my phone. 1 stock (1750mAh) and 2 extended (2000mAh). No I don't need all that juice... its a story for another time. Anyway....
Lately when I charge a battery in the external charger (using a USB cable and the wall plug supplied with the phone) the battery will not fully charge. The LED on the charger will change from red to green (Usually I charge the battery overnight, or while I'm away at work during the day). However when I put the battery in the phone, it will show somewhere between 80%-90% charged.
1) Would a 100% drain and charge reset the battery's "fuel gauge"?
2) My phone automatically powers off at 6% (which is fine, needs enough juice to save current settings and power down properly). Is there a way to truely drain the battery down to 0%? (I'm thinking of some kind of low-voltage lightbulb or LED connected to the positive and negative terminals should drain that down to 0%. Is this recommeneded or is it fine just running it down till the phone powers off?
Normally I try to plug my phone in and charge (or power off and swap batteries) once they hit about 40%-60%. I'm only interested in doing a full drain to see if that will get these batteries to fully charge in the desktop charger. Besides I've read from a few sources that it is GOOD for the battery to do this once in a while (Fully drain, charge to100%) to properly maintain them.
And as a side note, charging the battery in the phone (either with the wall plug or from USB cable on my computer) will always result in a 100% charge, which makes me thing the issue is with the desktop unit itself (perhaps faulty circuit that cuts off charge current when it thinks its full ?)
I purchased an extended battery, a Motorola branded BP7X for a Droid 2 phone. It's rated at 3.7 volts/1820 mAh. I tested it with a volt-ohm meter and got a reading of 4.2 volts.
When I install the battery in the phone and connect the charger (phone is off), the charging graphic shows the battery is fully charged. I can power on the phone with the charger attached, but as soon as the charger is disconnected, the phone dies. I tried this battery in two Droid 2 phones and got the same behaviour. Is this an indication the battery is defective, or is there something I need to do to make the battery work?
I bought this device (Galaxy S2 plus i9105p) few days ago.Yesterday I tried my recovery for a first time. There is a red triangle with a exclamation mark and fallen android guy. I can move in my recovery, but anything wont work. For example if I try to do factory reset and confirm it, everything dissapears but the fallen android guy and red triangle.
The phone and android itself works very well.
Is that normal?
Should I try warranty?
I have stock firmware, stock recovery, no root etc.
I would like to have a keyboard which is fully transparent and have swipe functionality..Fleksy does have this, but doesnt support Swipe.
View 6 Replies View RelatedI was getting this cheapo tablet ready to sell and wanted to reset it to factory settings but there was not an option to do that in its settings so I found "format internal" and without even thinking selected that. Well needles to say I can no longer start it up. This tablet has no model number on it, not even in the instructions.
Nexus 7 using Android Central Forums
I want to install a new rom to my android tablet.There are necessary instructions and files.One of the files are rockchip batch tool v1.5 and other is a disc image file named rom.
It says
1- load the drivers
2-select the img file (rom) in batch tool
3-install it to device by clicking restore.
Is this enough or should i delete the rom that is already loaded in my tablet.Like when we format the old OS in computers?
My tablet uses android 4.1.1
trying to find a way to get the android market?google play on a Visual Land ics 4.0 tablet.
I have gone through some of the steps online but the market always crashes.
I have an 8 inch tablet. Its a curtis Klu 8025. Well somehow the entire operating system is wiped out. Yes i mean completely gone. When you power the device on, it comes to the generic power on screen and then nothing. I have done the whole holding the power button, hitting the reset button, all of those things. I need to re-install the OS.
View 2 Replies View RelatedHow to re install android os on to a tablet? i think corrupted my tablet and i need a new copy of android on it.
View 2 Replies View Related