General :: ZEN Ultrafone 701HD Bootloop / Unable To Reach Recovery Mode
Oct 11, 2013
I have a ZEN ultrafone 701 HD (MTK 6589) device with HD screen.
Things were going fine when this Fine day I got a bright idea to change ROM.
I have a rooted Phone with working CWM, so went into recovery and cleared data/cache/dalvik cache,battery log etc.
Then I did a epic goof up by clicking on the ROM file of a different device to install as ZIP from CWM . by the time i realized, it was too late Now the phone boots up, shows logo and reboots,again and again. a previously working key combination to bring diagnostic mode is now not working.
The phone starts up and reboots so fast the PC cannot detect the device in adb mode. perfect aint it ?
View 9 Replies
Oct 7, 2010
I googled everywhere and couldn't find the correct answer for my problem. I pulled a pinheaded move by after rooting my phone, I wanted to put teenface's black notification bar. I put the 2 files from the zip (into my SDcard. I turned off my phone and now I am stuck in a boot loop.
View 1 Replies
View Related
Apr 6, 2014
I recently bought a Pearl Touchlet X10 quad core (PX-8880-675) tablet, but it was full of mods and when i plugged in the charger i received the "plugged in, not charging" message. So i started to clean up the ROM. Finally it showed charging, but now i really messed it up, beacuse now it is not booting. The tablet was not factory software, another tablet software on it that has a volume rocker. To start the flash mode i need the volume up button, but this version of tablet does not have this button. I tried the home button version, but it is not working because of the different firmware.
Here's the thing:The tablet always starts recovery mode, no screen, but adb working. When i type "ls /dev/block" in ADB shell it shows loop0-loop7 and nandf, so it is not seeing the nand I have seen other forums that when I type "dd if=/dev/zero of=/dev/block/nanda" it will erase the nand, and the tablet is force booting into fel mode (flash mode), but it not erasing beacuse the recovery is not for this tablet and it not seeing the nand.
View 2 Replies
View Related
Mar 19, 2012
I am using sony ericsson x10 mini mobile phone. I want to install custom ROM cyanogen 7 gingerbread. But I am facing problem while booting this in recovery mode. I have tried the following.
downloaded custom rom for xperia mini and copied in to sdcard
installed ROM Manager Premium (not purchased, downloaded from google search and it is working fine)
installed root explorer S1 tool
Rooted from superoneclick
downloaded xRecovery and copied into system folder
Flash tool - showing bootloader unlocked, and dont know how to flash phone.
msm7227 - used for unlock boot loader
I have rooted my phone successfully, all above things did successfully, when i am trying to boot my phone into recovery mode then it is not boot in that mode instead it boots in normal mode. What I am doing when phone starts and sonyericcson appears then i continuously pushing button many times but it boots in normal mode. So what I have to do to boot my phone in recovery mode. I have read and tried many guides in your forum but nothing works.
View 7 Replies
View Related
Dec 31, 2012
My sister has just gotten this tab, it's not rooted or anything bit suddenly it won't boot. Just stuck on android logo. Reset button does nothing. How to get into recovery and wipe it so it works again?
View 8 Replies
View Related
Nov 6, 2013
i had custom PMP light rom installed on my device. i then wanted to install SilverNexus kernel given here:URL.... so downloaded it & flashed it via CWM recovery
after that it keeps boot looping, also cant enter into CWM recovery. can't even install old kernel via Odin. odin is not detecting it anymore.somehow if i can replace my old kernel files read many threads. seems like Heimdall....but i m getting "ERROR: Failed to initialise protocol!" wen trying to generate pit file
View 1 Replies
View Related
Nov 18, 2011
I have serious problem with this android mobile phone. it is pretty good phone very useful with dual sim function one of them is 3G with WiFi Hotspot but the problem that I have rooted the phone with superoneclick and I have installed a lot of apps in it modifying some language files then when I restart the phone to let the changes take effect then the mobile keep restarting for infinite. Tried to get in to the recovery mode by using Call Button+Volume up+Power but the screen became blank. I spent the whole day searching the the internet to find the solution but with no clue. the problem the device is new and not supported that much in the public forums. could not find Stock Rom. Huawei website and bulletin was not useful.
Is there any way to do it through USB or sdcard and How?
View 3 Replies
View Related
Nov 14, 2010
Ok i have not been able to find any answers what so ever regarding the people that can not find the backup/restore option after entering the recovery mode. I have recently rooted using the new z4root application. I get a skull and crossbones supper user app, and was wondering if that means its different than the one with the ninja icon that everyone else gets.
Anyways, When i go to make a nandroid back up, i follow the steps to the letter, but when i get to the recovery menu, my options stop after the wipe baseband data option. there is absolutely nothing else there that says anything about backup/restore option everyone seems to be screaming about. Its not there!
Now please can someone figure out a solution to this problem?
My recovery looks like as follows: Android system recovery <3e>
Use d-pad to highlight: center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
wipe baseband data
View 3 Replies
View Related
Jul 25, 2010
I have a activity B that is called by activity A, I want to debug the code in B. I have set the breakpoint, however the debug control never enters B.
CODE:................
When I debug in eclipse, although the class B is called from class A, the debbugger pointer never enters the new window, where I have placed a debug point in Class B. I am not able to take the pointer control to class B and stop at a specific point, which will help me verify certain variable values.
View 2 Replies
View Related
Oct 6, 2010
When I try to use voice input for SMS or email messages I am getting an error message. I press the voice input button and receive the "Speak now" prompt I say what I want to say then it goes to "Processing" followed by the error message "Unable to reach the server". I do not get this error when I use the voice search app for google searches.
View 2 Replies
View Related
Apr 3, 2014
Friends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
View 5 Replies
View Related
Jul 9, 2010
I'm currently running the Kangerade Froyo ROM v4.0.7. I am unable to reboot into recovery. I hold power and X and nothing. The motorola symbol just stayes there. Any ideas what is going on? I'm wanting to load the BB v4 as i'm having some issues with my current ROM.
View 6 Replies
View Related
Aug 11, 2010
I have a verizon droid x running 2.1 that is rooted. For the last 3-4 days I have been able to access the vzw software update server (settings/about phone/software update) - whenever I do this I get the droid version of the endless hourglass and it never connects to the server to return the usual message that "your software is up to date" (or in fantasy-world, "froyo is ready for you to install, you lucky phone owner, press a button..."
This did NOT occur after I rooted the phone and seems to be unrelated to anything I did. I do not have any frozen or removed apps and apart from the rooting and few assorted root related apps, I am not doing anything that would affect this function (to my knowledge).
View 1 Replies
View Related
Aug 17, 2013
I want to root my zen ultrafone 101 dual sim android phone but i am unable to root it, how to root this device.
View 9 Replies
View Related
Apr 15, 2014
I have a Samsung Galaxy S Plus where, after flashing CWM with Odin, and installing cm11, I'm stuck on an infinite boot animation. But that is not the big issue. I need to enter Recovery Mode, where I have a backup, but the problem is that my Volume Up button is not working, so I can't use the Power Button and Volume Up(I also don't know what could possibly wrong with it) one to get there. So I was wondering if there is some other method to enter Recovery, I suppose by computer. I think that when I used Odin, the device restarted being in Download Mode, and I think that it hasn't to be On to do that.
View 1 Replies
View Related
Oct 7, 2012
I guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermittent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone?
View 1 Replies
View Related
Sep 26, 2011
I just rooted my Nexus S and it was successful.
However, now when I try to install Cyanogenmod I can't get into recovery?? When I go into bootloader, at the bottom it says "Fastboot Status - FAILInvailed Command". And when I click on Recovery, the Google logo shows up with an unlocked image below it. It flashes a few times and then reboots the phone regularly.
View 5 Replies
View Related
May 26, 2014
i have rooted my karbonn A7+ successfully after that i did a big mistake... i have flashed rom without CWM recovery..i did this=> opened power button + volume up key for recovery mode and applied direct rom through the option apply update from sd card in result i found that my mobile got stuck on boot animation.. after that i've cleared user data and wipe partition chache and now its showing BLUE SCREEN only .
View 1 Replies
View Related
Jul 25, 2013
I've just bought an Oppo phone (with MTK6589 chipset.) 2 days ago I decided to root and flash CWM recovery to my phone. Rooting gone well and the phone is now rooted. Then I flashed CWM with Mobile Uncle Tool. It said that I flashed sucessfully, I got no error. But when I reboot the phone to recovery mode, nothing happend, the phone just did a normal reboot! I tried to flash other third-party recovery mode such as TWRP and MIUI recovery but I got the same problem: the phone couldn't get into recovery. The screen with a text "Recovery mode" appeared in 3s and the phone just did a normal reboot. I couldn't even format factory, all I got was just a normal reboot. I even tried many tools on Google Play and MTK flashtool but there were no hope. Now my phone is working normally but can't get into recovery mode.
View 2 Replies
View Related
Sep 12, 2013
how to enter Recovery Mode holding down volume up AND volume down and press power.
View 1 Replies
View Related
Oct 23, 2013
I Have Android MTK6575 with Android 2.3.6
its called " G-TiDE E60 "
before doing anything , when i enter the recovery mode it shows a picture of an Android and a Triangle next to it " Which should be the background image of the recovery mode " and there's no menus or anything , nothing appears even if i press power or volume buttons
So now after i rooted the phone , installed another recovery.img with MobileUncle , it just keeps stuck on the phone's logo and doesnt even show that triangle picture and it doesnt show anything but the phone's logo
I tried a lot of different recovery.img files but none worked, Then I tried a recovery img that worked for another guy who has the same mobile kind , it worked for him but didnt work for me
Even after flashing it with MobileUncle , still i get the same problem..
All what i edited in the root files was the boot sound and animation and i even restored the stock ones back and still the same problem
and the last_log file in System(Root)/cache/recovery Includes this
Starting recovery on Tue Oct 15 04:49:44 2013
framebuffer:
0 /Imp rarrellsk (null) (null)
1 /boot mttl boot (null)
2 /cache yaffs2 .cbe (null)
3 /data yaffs2 user.. (null)
4 /mlsc mtd mlsc (null)
5 /recovery mtd recovery (null) /scl.rd vfat /clekeblack/mmcblkOpl /clekeblaclUmmcblk0 7 /system 540s2 system (null)
PS : Oct 15 is the last day i ran the stock recovery that only shows up the background image of recovery .. So all the recovery runs after flashing new recoveries till Oct 23 arent logged in last_log..
View 2 Replies
View Related
Mar 21, 2013
I want to make a clean hard reset of my GoClever Tab R974.2 but no matter what I do it won't load the bootloader. I tried all pssible combinations of all 3 abailable buttons (power,vol+,vol-) and all possible pressing times from a few seconds to a minute.I also tried rebooting into bootloader via the ADB but without any luck (device not recognized).My main problem with this system is that I tried to root it and it seemed like it worked, the superuser .apk was installed, however when I tried to start Titanium backup or any other prog that requires root access, it shows that there is no root access. Then I also tried z4root, but no luck either and SuperOneClick just freezes when restaring the ADB daemon.
View 1 Replies
View Related
Oct 7, 2012
I got the root for the Panasonic P-01D then deleted many preinstall app, such as launcher and android keyboard,so don't have any launcher and keyboard after reset the phone(wipe phone data).Now only can connect the phone to adb in recovery mode, because no root and launcher to open the usb debug.Can i install any launcher to phone in recovery mode by using adb?
View 9 Replies
View Related
May 30, 2012
Need rooting my gooapple 4gs. I have tryed everthing. And i can't access the recovery mode. volume key + power, dont work.
View 3 Replies
View Related
Mar 24, 2013
I've got an a31 allwinner device. (novo 9 spark)After having rooted it, i can't exit from recovery mode: adb device shows me a number and recovery...And the tablet doesn't want to boot normally.
I can't use phoenixsuit, because it's now not recognised by the pc (recovery mode).
View 3 Replies
View Related
Mar 5, 2010
I was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies
View Related
Aug 28, 2010
Just FYI in case anyone wants to know: For download mode, with the phone turned off, fold the number 1 key on the QWERTY keyboard and the power button simultaneously For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously. You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
View 3 Replies
View Related
May 14, 2013
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
View 1 Replies
View Related
Jul 1, 2013
I recently rooted my LG Optimus L3-8C (E400) running stock rom and version 2.3.6 Gingerbread (yuck) and I followed all the instructions from this video:
in order to flash the CM9 ROM. Problem is I can NOT reboot into recovery no matter what I do it seems. When I try tp reflash the CWM recovery it tells me "successfully installed!" then when I press 'reboot into recovery" it gets stuck on the LG logo for so long I often have to hold the power button to go back to my device. I even download "recovery flasher utility" found here [URL]....but, whenever I run the app it tells me "no recovery.img" found onexternal SDCARD even though I placed it there! I tried to fastboot but whenever I run CMD it tells me " 'fastboot is not recognized."
View 3 Replies
View Related
Jun 3, 2013
My EVO 3D (Sprint) is rooted and is on android version 2.3.4 and I believe it's not an android official release, this is how it was given to me. I'm trying to install CM10.1
I installed ClockworkMod 5.0.2.0 using ROM Manager and since then I haven't been able to boot into recovery mode. I can get into bootloader but not recovery. I've tried powering it on with the volume button down, using the recovery reboot option, and tried using "Reboot into Recovery" in ROM Manager, but I keep seeing the same thing. It boots with the HTC logo then goes black then at this point i believe I should be seeing recovery mode but instead I see the HTC logo again and then it just boots like normal. Is there something I did wrong and is there a way to get recovery to work again?
View 2 Replies
View Related
