General :: Xperia Arc (LT15i) Can't Boot Or Flash
Jun 7, 2012I can't start my Arc now. I tried to repair my IMEI number with octupus and still after i can't connected in Flash or fastboot mode. Only Test - Point is available.

I can't start my Arc now. I tried to repair my IMEI number with octupus and still after i can't connected in Flash or fastboot mode. Only Test - Point is available.
I have a problem with the swap partition on my device, Xperia arc. I flashed my device to "LT15i 4.1.B.0.431 Generic Global World" follow by this post. I found that lacking in memory so I tried to use swap partition and created 256 Linux swap partition on my SD card. But "free" commend still shows swap=0 However, I decided to use swapper 2. Still no effect and I couldn't get swap although swapper did its job without fail! After few days search I found that the kernel doesn't support the swap, So, I tried to use "Kernel.sin unpacked and added CWM options" form here. It also didn't work, neither "init.d zram scripts from wedgess" from the same page.
View 2 Replies View RelatedI have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I flashed a THL W100 with sp tool and stupidly left the preloader checked, it finished all good and show me the green circle, but now it wont boot up and when i try to flash with any w100 rom it says the rom is not compatible with this device..
View 5 Replies View RelatedI flashed my intex aqua flash using a rom on [url]... and my phone now stucks at boot screen......
View 1 Replies View RelatedI used insecure boot and root trying to root my phone, which was a huge mistake as i noticed a few minutes later since i cant startup anymore and only get into bootloader.
Now I'm trying to flash my stock rom back.
My CID is VODAP102 and my Version is 3.14.161.27 so i downloaded the rom and tried "fastboot flash boot boot.img" the result is:
sending 'boot' <8192 KB>...
FAILED <data transfer failure <Unknown error>>
finished. total time: 0.158s
I was just listening to some music and browsing FaceBook when my Xperia PLAY phone suddenly shut off last night I tried everything to make it start again, but nothing happends! I tried simply booting it up, removing the battery, tried Sony PC Companion and I even tried to flash it with FlashTool, but not even that would recognice it When I connect it to my PC while holding the BACK button, the phone actually shows up on my PC, but I still can't get it to work Ill try flashing it with FlashTool again, since I'm on a different PC now, but I think I'm going to have som trouble finding the drivers for QHUSB_LOAD
View 6 Replies View Relatedi m using sony ericsson xperia arc s i have rooted my phone few days ago everything was ok i have root through flashtool method and i think 587 kenel was used. i dont know about roms kernel n etc etc i have read the thread and root my phone last night i tried to install font changer i granted superuser request and phone is restarting and then stuck on bootloop first it shows sony screen and then xperia screen and again restart and this process go on what should i do
View 4 Replies View RelatedHow to boot Xperia neo L in recovery mode using phone buttons ? I have tried so many combinations but not getting right way.
View 1 Replies View Relatedmy device : xperia arc s
im new in android and a couple hours ago i try to instal beanstalk - legacy kitkat 4.4 and they suggest to download kernel from dark raven "dark kernel cm11.0" 11DarkUrushi20131130 after that im flash the kernel and something happen....
my phone dont boot up and the logo dont appear
im try to connect to flash tool but still dont get it...
nb : for guarantee already pass 3 month ago....
last night i rooted my phone and it was perfect but today i saw an video on youtube showing how to make status bar transperent like android 4.4 in that video he said it is a app runs on rooted device .the app name was framework some thing like that i opened that app and clicked on frame work it ask me to grant root access i gave it and clicked on install/update and first time it restarted after restarting it once again i opened that app and did the same process .then thhe output was successfully created new partition and restarted and got stuck on boot loop and i cannot do any thing when i connect it to pc for pc companion the pc is not recognising the device.
View 14 Replies View RelatedI unlocked my bootloader a month before and I didn't know how to relock it back so I searched and found this website >>androidgadgematic I followed everything it mentioned and after finished installation, I hold on the boot button, the green light indicator blinked once and vibrated once but after that gave no respond. I didn't unroot my phone before doing the relock procedure. Now, I really don't know what to do because I searched google but none. I indeed need a step by step procedure to save my phone. How to boot my phone now, or else it is dead. I don't have if any method to reinstall ALL system files, no matter kernel, firmwares via my pc as long as it can helo my phone to boot up.
View 1 Replies View Related"Flash any Stock B.1.54 or C.1.0 (use flashtool)." Instructions from a ROM thread I'm following
I am flashing stock onto my Sony experia u but i don't know how to get the stock files to flash it i have downloaded flash tool but i don't know were to get the flash files.
i am not able enter flash mode in my X10i device i wanted to flash kernel.
I followed all the procedure:
1) by holding back button & plugged in USB cable.
2) my phone got recognized in the flash tool. Got a message stating "Device connected in flash mode"
3) then my device did not stay much longer in flash mode (less then 10 sec). After that it automatically booted to phone charging screen.
below is log generated in flash tool, when i tried to flash the kernel:
26/026/2013 07:26:07 - INFO - Selected kCernel-CM9-v03.ftf
26/026/2013 07:26:07 - INFO - Preparing files for flashing
26/026/2013 07:26:07 - INFO - Please connect your device into flashmode.
[Code]....
My android is rooted and sim-unlocked by Omnius.
I manually installed ClockworkMod Recovery. (to do this I had to remount the /system folder as rw, don't know if this is important, but wasn't in the installation instructions).
PC companion says my firmware is the lastest
I want flash this kernel. I think I can't unlock my bootloader...
I followed this guide to unlock the bootloader, using FlashTool or msm7227_omniusSL.cmd. Both processes complete without errors... But when I check with s1tool, the erom version has an uppercase "R".
When I try to flash, FlashTool throws the error:
Code:
06/056/2012 20:56:22 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Here are my s1tool and FlashTool logs:
s1tool:
Code:
Welcome to S1 identify tool
[Code] .......
Both BL unlocking methods were repeted several times, with equal logs...
I'm using ROM manager to flash new roms onto my ally. anything I click on (Reboot in Recovery, Install from SD Card etc) they just reboot my phone.
View 1 Replies View RelatedJust flashed my phone and now its stuck looping boot screen, anyone know where i went wrong??
View 6 Replies View RelatedI'm stuck on the android on skateboards after I partitioned and flashed apps2sd. Any resolutions other than wiping? Evil eris 2.0.1
View 5 Replies View RelatedI am currently running BH2 1.6 no twiz. I was thinking on trying the galazy 1.6 but on the BH2 1.6 no twiz thread. It says that flash boot and phone only once, why? I want to go back to 1.5. should I only flash PDA? Why BH_MAN says only flash boot, phone once?
View 5 Replies View RelatedI try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
I am trying to do some low level performance testing related to device processor cores through adb which I feel it is affected by Android background services and system stuff.
As I know that the Android boot sequence stages are as follow:
1.Execute Boot ROM code.
2.Execute the boot loader.
3.Load the Linux kernel.
4.Launch Zygote, which initializes the Dalvik VM.
5.System server which loads the Android system.
So my question is how can I interrupt this sequence to force it stop on stage 3 to load Linux kernel. This can implement my intermediary performance testings before loading again Android system.
Does Fastboot or Clockworkmod recovery can load my device to a kind of Linux kernel?
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies View RelatedInstalled flash 10.1 today and since then...won't boot up at times, screen orientation won't switch, lock-ups, pages hang, multiple reboots etc. How do I uninstall this? I've looked on the phone and tried to research online without any luck so I have turned to to the real experts. Help!
Thanks in advance.
I need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?
View 8 Replies View Related huawei u8860:
i compiled a kernel from the sources kernel-3.0.8-U8860-IcecreamSandwich.tar.gz .
on virtual box ubuntu 10.04 (oracle java 1.6.0u33 )with
Code:
gcc -v
x86_64-linux-gnu
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1)[code]......
my sony x10 is frozen at boot screen i tried to use update service it finds the phone and it keeps saying install failed
View 2 Replies View RelatedI got my x10 yesterday and played all day long. Everything was fine untill I try to upgrade the software.I used Sony Update Service software and it give error at the middle of the process.Now, I got explanation point on my screen when I turn it on. I can't do anything.Any ideas, how to fix?
View 11 Replies View RelatedJust upgraded my wifes X10 mini (unbranded UK version) using the SE PC Compaion. Followed all instructions etc, but its now stuck in a boot loop, restarting just after the full screen coloured animation "spins" into the SE logo and text.
View 3 Replies View RelatedSimple question: I think my Hero does, so surprised if the X10 doesn't!
View 5 Replies View RelatedI'm really struggling with the camera on the x10. I was expecting going from tocca ultra to SE, (both 8.1) to be quite similar in quality, but this ain't the case. Picture is half the size of the screen and pics during night are awful!! Cant even seem to find the flash.
View 10 Replies View Related