i hv a sony xperia tipo which i recently updated to 11.0.A.4.27. After the update i am unable to root the device using Bin4ry saying system/app/backup-restore.apk does not exist, sustem/bin/ric does not exist. I hv used bin4ry with old firmwares and it worked but dis tim it shows the above things does not exist, but shows successful and reboots but nothing happens.
View 4 Replies
I just purchased my Sony Xperia Tipo Dual and want 2 root it.how to root it coz i Google a lot but dint get an thing.
View 1 Replies View RelatedWhenever I am trying to root my xperia tipo v16 ,through binary rooting,after pressing 1 and then enter key it says pls connect to usb debbuging where I am spree connected to it.Pc companion is also not getting installed.
ST21i
I have SONY XPERIA tipo with 803MB Internal Sotrage and 2.20 GB.
I have rooted the phone, and set external 32GB card as the default SD card (i.e. phone thinks its internal memory is 32GB) via changes in /etc/vold.fstab file.
The result is that phone regards the 2.20GB space as external memory.
I can move many applications to 32GB card, however some applications e.g. BusyBox, GCC Toolchain, and Chrome are not movable to Internal storage (32GB) or external storage (2.20GB).
Since the 2.20GB space is of no use for me, and it is mounted under the same device where "phone memory" 803 MB is mounted i.e. :
/dev/block/mmcblk0 = 3909 MB
/dev/block/mmcblk0p11 = 524 MB
/dev/block/mmcblk0p11 = 167 MB
/dev/block/mmcblk0p15 = 803 MB
/dev/block/mmcblk0p16 = 2311 MB
Surely, the last partition "/dev/block/mmcblk0p16 = 2311 MB" is the free storage not being used, and "/dev/block/mmcblk0p15 = 803 MB" is the phone memory, which I want to extend/increase.
My question is: Is it possible to merge the alst 2 partitions (e.g. by formatting 2.2GB space and then merging it with the 803MB space. This way my phone will have its system memory pretty large, and I will be able to install more applets through BusyBox as well as Chrome etc.
I'm usin sony xperia tipo dual st21i2. Two days back I have rooted my mobile using unlockroot. Yesterday i was trying to install custom ROM, for that i booted my mobile in recovery mode using install.bat. In recovery mode took back up and wiped data and cache then installed the zip file(ST21i JBMP5.zip) from SD card and rebooted. Now the mobile got stuck with the screen showing JB MINIPROJECT and a circle was revolving in anticlockwise around the number 10. I pulled the battery and tried to boot in recovery mode but no use. whatever i do the mobile stuck with the same screen.
View 2 Replies View RelatedDoes Xperia Tipo have quick dialing options?All the previous phones had that function..I can't find it on my phone.
View 2 Replies View RelatedI recently purchased an unlocked Sony Xperia SX SO-05D and am using it outside of Japan. I am not able to send or receive any MMS messages. I have updated the APN settings so that I'm able to get on the internet via data. When I go to the settings in the messaging app there's not even any options/setting for MMS like there was on my Xperia go.
View 5 Replies View RelatedHow to root Sony Xperia V 4.3 JB. LT25i
View 2 Replies View RelatedHow i would go about rooting my sony xperia T
I recently (today) just updated to android 4.3 from 4.2.2 but i did so using sony companion and my root has gone and how to root android 4.3 on the xperia T .
I am trying to compile a WiFi driver (ath6kl) for my Sony Xperia E (Android version: 4.1.1, compilation: 11.3.A.0.47). I have downloaded the source code for compilation 11.3.A.0.47 from here: developer.sonymobile.com/downloads/xperia-open-source-archives/open-source-archive-for-build-11-3-a-0-47
I have compiled required kernel modules (cfg80211 and ath6kl_sdio), but I have encountered some problems during this proccess. I don't understand why on my android device (in /system/lib/modules/ath6kl) there are two modules: ath6kl_sdio.ko and cfg80211.ko (first one depends on the second one). But when I look at my sources, I see the following module dependencies for ath6kl: ath6kl_sdio -> ath6kl_core -> cfg80211. So there are 3 modules instead of 2. Anyway, after some modification (I merged ath6kl_core and ath6kl_sdio into one module) I managed to compile ath6kl.
I have replaced compiled modules in /system/lib/modules/ath6kl on my android device, then rebooted and I got the following error:
<4>[ 23.055226] ath6kl_sdio: disagrees about version of symbol cfg80211_sched_scan_results
<4>[ 23.055251] ath6kl_sdio: Unknown symbol cfg80211_sched_scan_results (err -22)
[Code]....
I am very desperate cause I want to modify this driver (to be able to calculate some network statistics) but I cannot load modules at all so I am stuck.
i want to root my phone and install cm10 in it. step by step details.
View 2 Replies View Relatedroot my android 2.3.3 version xperia x10 I .
View 1 Replies View Relatedhow to root my Sony Xperia S without unlocked bootloader?
i found many thread on here but i can't understand it at all. my xperia s is on android version 4.0.4 now... 6.1.A.0.452
how to root Sony Xperia E?
Sony Xperia E (single card)
Android 4.1
1-GHz-Singlecore (Qualcomm)
phones gone and broken itself, half the screen is white and its decided to not make calls and send texts, well sometimes works, mostly doesnt. regardless i need to unroot this thing and clear any proof it was rooted before it goes back to rogers. i used z4root to root it, can i do the same to un root and then do the software repair from pc companion to reinstall the software and get back all the things that were on the phone like timescape and such?
View 3 Replies View RelatedMake my sony xperia Z speaker more louder & hide the soft key buttons after root
View 1 Replies View RelatedMyself, started with backup and restore, backup was completed and also backed up my contacts to flash just in case. Hooked phone to PC companion and was informed an update was available. Followed through the update process and when the phone was disconnected and powered on as instructed I was still left with 1.6. Now when I connect to PC companion I am informed software is up to date with 1.6.
View 8 Replies View RelatedAm unable to send sms with X10. cant seem to locate where to set sms service centre number. I am able to send when i put sim in a different phone so sim prob is out.
View 1 Replies View RelatedI was unable to receive MMS messages since upgrading to 2.1. I spoke to voda and now have the fix for anyone having problems. It may work on other networks, it may not, but it definitely sorted it for me on vodafone. Anyway, here goes:
Click on settings.
Click on Wireless & Networks.
Click on Mobile Networks.
Click on Access Point Names.
Click the Menu Button, (Left hand silver button at bottom of phone).
Click Reset To Default.
Once you have done the above, turn off your phone, remove your battery and sim card, and wait at least 10 seconds and then replace your sim card and battery. Turn your phone back on and job done, you can now receive MMS texts again. But do note, any previously received MMS texts will still be un-openable so you will need to ask the sender to resend.
I got the SE Xperia 10 mini and I am trying to connect to PC Companion. when I try to connect to install it it doesn't do anything what am I doing wrong? Really need some photos and music on the phone but cant seem to do anything as bluetooth doesn't work either!
View 2 Replies View Relatedi already installed a software update software after opening it i m unable to confirm my phone. Can any body tell me the way, how can i confirm my phone, it shows me to switch off the phone unplug the battery n wait for 5 sec. then reinsert then plug the USB n continue holding the power button but it can't detected my phone.
can any body tell me how can i use this application. what is the full procedure?
I've just tried to update my X10 to the new 2.1 firmware, with absolutely no luck.I get through all the stages, everything works fine, no errors reported, everything reset on the phone, all looked great.But, when I check the version its' still at 1.6. And every time i connect it to the PC after the upgrade, it tells me there's an update available, just to go through the same thing again, and still leave me with 1.6.
Any ideas?I tried uninstalling and reinstalling PC Companion.No change. I'm on Orange UK, and the update only became available to me today.
I'm trying to update my phone since 1-11-2010 till now , but it always gives me this message "your phone is up to date"
Model : Xperia X10i
Firmware : Android 1.6
Baseband 1.1.31
Kernel version: 2.6.29-rel
build number : R2BA026
I can't install the PC companion 2.00.146. i already downloaded it but when its time to install it it says "Error Number: 0x80040707. Description: DDL function call crashed: NewUI.ISGlobalSubclassDialog." i already downloaded it 5 times assuming that maybe the PC companion was not downloaded properly but again the same problem occurs.
View 1 Replies View RelatedYesterday I updated my x10 to 2.1 and now when in a call the screen goes black and there is no response when i press any of the button.Ultimately meaning i cant end the call.really annoying now my mates know this and just keep the call going so i use my minutes.any suggestions?
View 4 Replies View RelatedFew days ago i had trouble with the keyboard of my X10, it was, for unknown reason, lock in Korean and i couldn't change it.So i decided to reset my phone to factory setup. This worked and the keyboard came back to french.But now i can't access to any Google app, as Market, Gmail, etc.It's asking me to log in to my google account (it never ask me that before, even when i bought the phone), but it's always telling me that my password is wrong and advice me to connect http:/google.com/accounts on my PC. I did it and i can access to my google account without any problem.Then i updated my phone to Android 2.1, but it didn't solve anything, i tried to repair it with Update service and PC Companion, but it didn't help more.I found on internet that i could put "null" as my password, but then it's asking me to reproduce a capcha, i did but it's asking me to reproduce another one, again and again.I noticed than my phone seems to have some trouble to connect with my SIM card, don't know if it's link.I don't really want to send my phone to repair for 3 weeks, but this is becoming really annoying, what can i do ?
View 1 Replies View RelatedJust got the mobile 3 days back.I am unable to make or receive calls on X10 from yesterday. Have tried the following things : 1) Switching Off 2) Updating the software. But both these methods have not helped. Able to use WAP/GPRS but calls are not getting connected. Have tried to change the call waiting settings, phone says Network or Sim Card Error.Signal strength is also pretty decent (3-4 bars). I have tried my sim in other phones Nokia, Samsung, and it works perfectly fine.Have tried other sims on X10 and they too are showing the same error. Can't figure out what the problem is?
View 2 Replies View RelatedAfter a couple of days the phone is unable to make or receive calls, or send or receive txt messages.If I try and make a call it attempts to start the call, but immediately comes back with unavailable. Incoming calls go straight to voicemail. Outgoing txt messages don't work. What is strange is that if I try and browse the web (over 3G) then that works fine! I have tried doing a network scan again, and reregistering to Tmobile, but that doesn't make a difference.
If I turn the phone off and on again, then it is fine and all calls/txts are working again. I have seen this 4 times now with my phone. It doesn't always happen, but it has happened a few times now which is worrying. The annoying thing is that you obviously don't know when incoming calls stop. You only find out the problem has occured when you attempt to make a call or send a TXT.
I can send MMS to others but cannot download the MMS attachment sending from others.
View 3 Replies View RelatedEven though I am still on a v1.6. Whenever I connection my phone try to do a update, it keeps saying that I already have the lastest software. Only gives me the option to repair or cancel. Same thing is happening if I search for the update from phone. I want v2.1.
View 1 Replies View Related