I recently got a chinese tablet that runs a direct port of the original android version, which im almost certain dosent support USB Host, howeve the tablet has A USB host port. I am curious if theres an app out there that supports USB host for keyboards and/or Flash drives. I like the idea of just plugging in my flash drives and viewing/editing my files on the go when I dont have my computer with me.
View 9 Replies
I have a Chinese 7 inch Tablet named Luv Pad AD701 based on Allwinner A10 processor. I installed "CWM 6.0.1.2_a10" and then rebooted to recovery mode. Now I am stuck in the loop of CWM Recovery mode. The tablet only opens recovery mode and desn't boot normally. I triesd to flash a new ROM but it says
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/command
Warning: No file_context
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: failed to find "cache" partition to mount at /cache
This tablet doesn't have volume up or down button.It only has power, back and option button.
I have chinese tablet, probably it's a any product of MID, becouse on start appear MID logo, perhaps it's only firmware from MID devices. At the back I can see m70008 maybe it's version of tablet. That tablet was blocked by too much write bad pattern and don't know google e-mail. So I tried do wipe data via adb, and probably I do wipe all . Tablet stuck on bootscreen, and system don't start. If I try run shell via adb I get error "- exec '/system/bin/sh' failed: No such file or directory (2) -"what I have to do ?.
View 1 Replies View RelatedI was wondering is there a possibility to root chinese tablet KNC md802 which has android 4.0 ICS?
Other specs:
Reference
KNC MD802
CPUALLWINNER A10, 1.5GHZ
Operating SystemAndroid 4.0
RAM1Gb DDR3
Built-In Storage16Gb
[Code]...
I have a Superpad 8 Chinese tablet that will not boot.At first, it would boot only as far as the "Andrtoid" boot animation and just hang there.Then I started trying to restore a different ROm to it.
ADB sees it, and I was able to pull the /system directory from the tab.
After trying to flash a ROM to it using this "Livesuite" app I found, , which completed successfully, but since then, when the tab boots, it displays absolutely nothing.
ADB still sees it, but whatever command I send (adb reboot recovery or adb reboot bootloader), it just reboots and does nothing...
I just received this Chinese tablet I bought some months ago, and it came without Play Store. How can I install it?It uses Android 4.0.4. URL....
View 2 Replies View RelatedI have a chinese Allwinner 7" tablet ( Rocky M713HD ) , I was trying install a CWM recovery image. I connected my tablet to PC, opened my terminal and taped:
adb push recovery.img /data/
adb shell "cat /data/recovery.img > /dev/block/nandg; sync"
adb shell "echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot"
After that, my tablet freezes on bootloader with no single info on adb when typing "adb devices"
As you can see, I missed a caracter on the 3rd line: ( nandg/nandf )
I was on Allwinner 4.2.2 ROM.
I just bought a chinese tablet, is this one:[URL]
The problem is that some apps are not showing in the app drawer, like for example contacts, os google talk. They are installed, becaused they show in the list from Settings->apps. I can't access those apps and other by any way!! I tried different launchers, but it's the same.
I have an android 4.0.4 dual sim chinese tablet that i would like to root. I would like to know if there is a working one click root android app or a pc software that would root this device of mine? I have tried a few one click root programs but without success and some are still under development and some yet dont support root of android version 4.0.4 yet. Any working one click root methods for android 4.0.4?
my tablet information:
Latest dual sim 7" HD Tablet Phone (Phablet) with MTK6575 cpu
Operating System: Android 4.0.4
Model: MID
Kernel Version: 3.0.13
Build Number: ALPS.ICS.MP.V2.2
I've tried lot of methods until I heard of this not-known-for-many app which finally unlocked my chinese tablet.
If you cant find a root method specialized for your device its a must to try this out before asking:
Unlockroot Pro 3.36
I had trouble with the free version but I "bought" *cough* the pro version(3.3.6) and it rooted my device on less than 2 minutes.
I have chinese phablet mtk8389 hd89 dual sim, 1gb ram, gps,quadcore, wifi,bluetooth,and microusb port problem is that if i connect it to any otg or usb cable to connect with computer it dont show any response but just start charging then i find oht a solution that i need to fix a file insode android system/etc/permissions name of file android usb host .xml i go to file and add the file but actually file not get added even i cannot edit any system file because i dont have permission then i find out that for doing that i need to root the device but how stupid is that if i dont have usb host mode active how i can onnect my device with computer for root?
It does not connect even dont show in computer that some usb device ger connected its very complicated, how i can enable usb host mode with out root device and if i have to root the device how i can root with out usb mode not working because with out usb host me the device will not be connected . i think my device is not rooted but i have acces to android all system files but i am unable to edit any file like it have write protected .
enabling USB host mode on Pantech burst P9070using the OTG cable.
I am currently using official ICS that's available on Pantech site but rooted it...
I have this tablet Microlab Spektru 1.2 Ghz RK2918 , 512 Mb DDR3 Ram. Not sure if it had 4.0. Actually it's not my tablet, my grandpa' bought it, anyway he noticed that the Wifi signal was very bad and someone told him that he could use a micro-sd for updating.
So he turned off, put the SD and "installed" android again. after this android started normally but the Touchscreen not working.
Also I found some firmwares, but i Still can't get into recovery mode, the tablet doesn't have a Home button. Just Up, Down Volume and Power.
How can I get the Spotify app to run in tablet mode on my HTC One? I'm trying to use Xposed App Settings to do it, but the app still recognizes my device as a phone.
View 9 Replies View RelatedI have an ASUS TF700KL tablet that I'm trying to fix a firmware update on. The only firmware update available for this model can be downloaded from the ASUS webpage - you can't get it from the settings menu.
The unzipped file is a .raw file, so the only way I can get the tablet to update the firmware using this file is if I put it on the external SD card and make a hard reset launching from the SD card. However, for some weird reason the tablet can't see the SD card when in the boot mode. The SD is clearly visible and accessible when using the tablet.
I want to use Spotify on my phone, but a stupid app restriction allows me only to listen randomly chosen songs from an artist or a playlist. This doesn't happen on the tablet version hopefully, so I want to use the tablet version on my S4. I used the Xposed module "App Settings" in order to change the app's dpi to 240 and even to 160, but it doesn't change to tablet mode (although the app became nearly impossible to read because of the dpi). I assume that Spotify doesn't change its form by dpi then, what this app knows it's on a tablet?
View 4 Replies View RelatedI'm a Galaxy S2 GT-i9100 user and I wanted to know how to run touchwiz in tablet mode. Do i have to decompile SecLauncher2.apk and edit the code so that it becomes accurate when using with landscape mode or is there an xposed module. Or do i edit build.prop file? I don't want to install other launchers or get ParanoidAndroid.
View 3 Replies View RelatedI rooted my galaxy tab 2 7.0 yesterday and flashed cm10.1. Everything was working great until I tried changing my boot animation. When I tried rebooting it rebooted but there was no boot animation and then once it rebooted half of the screen displayed black(it isn't broken because the backlight is on and it works fine when it is in recovery) I boote into recovery and tried restoring it from a backup I made of the stock rom but it keeps saying E: signature verification failed.
View 1 Replies View RelatedMy friend have a ChiliGreen tablet, yesterday he reboot it after stop all application who were running on it and after the reboot the tablet goes automaticaly in recevery mode and now every time he reboot it goes to recovery mode i make a factory reset but nothing always recovery mode.
View 2 Replies View RelatedI cannot access the recovery mode of Ainol Novo 8 Advanced MINI Tablet. I tried holding power + vol+ button but its not working,
View 2 Replies View Relatedi was trying to reply to my friend in chinese but was not able to change to chinese input. How do I do it?
View 3 Replies View RelatedI have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedWell I've already used the USB Host on my Tablets and phones for mouse, controllers, keyboards, Apparently we can also attach USB Hard Drives?
My question is can it also work for USB CD/DVD Drives? I don't have device right now setup with USB Host to try it out.
I`m searching for a useable solution to get usb host/otg on my Galaxy Ace. I want to use my phone to control my nikon-dslr. There are apps like dslrdashboard or bbqdslr on the market, but they need usb host.
Using Mardons CM10.1 ROM [URL] .... but it seems that the kernel doesn`t support usb host.
I didn't find a kernel with usb host.
It seems strange to me: ext2/3/4 is the native filesystem for the device - but with device as USB host I can't access. It seems only FAT and NTFS is available.
Is there any ways to make this possible?
Background: my Sat-Receiver records to an ext2/3 partition and I would like to transfer this smoothly to my nook.
Currently my solution is to use my laptop, there I need a ext2/3 driver and transfer via MPT. This is not very comfortable and slow.
I want to ask if is possible to buil an app that permit to connect my Android phone with the remote sim in onother phone not android. This app make possible receive and make calls and SMS. Is the same use of the hardware GMATE.
View 6 Replies View RelatedHow can you edit your host file?
PC36100
Right now, I'm using an HTC EVO 4G LTE, running ICS. Now the source code is out, however, no one has yet to add USB host capabilities to their kernel, so I figure I might as well do it myself. I read on kernel development, and I have a surface level understanding, but I'm just interested in adding the USB host capabilities.
View 2 Replies View Relatedhow the Nexus Tablet 7 charges? Not through the USB port, right?
I have a Transformer right now w/ the dock & 2 full sized usb ports on it. But I have been waiting for the Nexus Tab for months, because of the screen, processor, and price. however since it does not have a microSD, I would definitely need to be able to plug in my 500GB usb hdd into it. I would need a OTG cable, right? And it does not use the MicroUSB port to charge, right? Otherwise how could you use the usb and charge it at the same time?