i have flashed my p768 with JB rom and now my camera doesnt work. Looking for rooted CWM Nandroid backup of ICS V10B so i can re-flash my p768 from CWM in order to get my camera working again.
View 1 Replies
My camera stopped working. When I click my camera application I get the message "The application camera (process com.android.camera) has stopped unexpectedly. Please try again". It's just a blank screen?
View 3 Replies View RelatedI am using a BQ Pascal 2 Tablet which is equal to the Odys Neo X7. I installed the german Version of the Odys Neo X7 software, because there was no german or englisch dictionary installed. The ODDYS software works without any issues, but there is also no dictionary included (confirmed by Odys Support)
So i tried to go back to the Stock software, which is a bit faster.I tried to restore the Backup, made with Clockwork (after formatting the device). no success. The device get stuck at the Bootscreen.The same happens if i will install the CyanoMod from this Forum.
The Odys Update uses the RKAndroid Tools to flash the device. BQReaders uses a file named image.img which has to be placed in the root of the internal SD-Card. The update starts automatically after a few seconds. The Odys-Software is not able to do this.
The Image-File from BQReaders is only only one file with a size of 315 MB, not divided in Bootloader / Recovery and so on.how i can go back to the Stock Software? It can be experimental, because i will be able to install the Odys Software by the RKAndroid tools again.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
I have Infuse I997 with Gingerbread UCLB3. I think my camera got wet during a rain and stopped working. When I open camera (or flashlight) it opens up the application but the screen is black.
It also does not want to close and eventually shows a message that application stopped working and needs to close.
I just flashed my rom on my prestigio 4020 . Rom is running well, but camera isn't working.I got stock rom files.How i can fix that camera problem?!? On stock rom camera worked well.Can i transfer camera file (etc.) on this my new rom?
View 9 Replies View RelatedIs there any way to bypass the fact that the camera is not working on the ICS from for galaxy W? Need drivers for it that can be included in the rom? GT-I8150
View 4 Replies View Relatedi am using xperia s .recently when i connect it with pc companion it prompts me for jelly bean update and i updated it sucessfully but only 1 thing is wrong that now camera doesnt work it says error camera not available.i switched back to ics and its working again then i again updated it but again it says error camera not available
As I was porting a rom for my micromax canvas lite (nt6577) everything works except the camera.
View 5 Replies View RelatedWhenever I take a picture with my front camera using instgram it goes the the screen to choose my filter but the picture doesn't show and then after a minute it goes back the previous screen I was. Rear camera works fine. Did a clear data and even uninstalled and reinstalled it. Not rooted.
View 1 Replies View RelatedMy camera will not start up from any of the camera app "buttons". This happened sometime around/after ICS was installed. Is this a problem with ICS or, have I got a broken phone app? What did I do besides go to the Verizon store - that is a last ditch effort.
View 7 Replies View RelatedA few months ago I bought two N8000 phones and I was glad they came with full Hebrew menus. But now I bought a device that came without Hebrew.
So I tried to update the version with this method bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
And now the device turns on and works, but the screen remains blank white.
I saw on the forum that people have asked for the problem and you told them they have to replace the DSP_BL file and reflash
The problem is that the links are broken and I can not find the appropriate version for me.
I have tried full and partial update with many versions:12.06.12 firmware.rar
20120705_e1808_v75_jbl1.zip
I downloaded also this tool SP_MDT software fot flashing.rar But I was unable use it
I downloaded also this two packages, (Taiwan101_STAR-N8000_V.05-1.zip + Taiwan101_STAR-N8000_ICS_V.09.zip) but they are not suitable for use with SP Flash Tool v3.1216.05 (they not have scatter.txt file)
I've compiled a kernel for my device most of think working exepted usb host , sdcard mount , and camera (sourcery if for my device too , nothing ported).its wiko cink peax 2 mtk 6589 device and the main camera name is ov8825-truly-MM a 8mpx camera launching but not showing the good color its dark , and in full daylight its showing in green colors.
Here is my logcat [URL]
Once upon a time I used another website to customize my new Ascend. Long story very short, I messed it up. I am pretty sure I deleted some stock stuff, and since my computer that had all of the backups on it has died, I have no way of getting it back.
I've tried flashing back to stock, I've tried flashing to different roms, I've tried doing a factory reset, I've even tried loading the stock zipped rom from the sd card. Of all the methods that I tried, the only one that doesn't hang on the android screen is flashing a new rom - so I'm using CM7 for now. Everything else kills the phone, it never boots past the android screen.
I just went thru the gauntlet again, trying to "fix" my phone, but nothing worked except flashing CM7. My camera hasn't worked since I started messing with this phone when I first got it. Now, all of a sudden, my internet is having issues.
I have tried downloading the camera.apk, but it doesn't seem to do anything - is there something I'm supposed to do other than stick the apk file in the sd card root?. I still can't use the bar code scanner, or a shopping list scanner thingy - everything says the camera had an unexpected error and/or the device failed to give access to the camera.
Going to RoM Manager, trying to download a different RoM (I have paid for the premium) and I get the you must have CWM installed message. Okay, I wiped everything, that makes sense. Click the install and either nothing happens or I get the message can't get an internet signal. The browser will connect, if I click retry, retry, retry 20 times.
I really dont know if I can justify the cost of a new phone, seeing as I dont really need it - I just want it. Need fixing the signal and camera on this one? FYI, the 3g icon on the status bar shows connected.
Usb port of my Samsung infuse 4G isn't working, when connected it charges but pc doesn't recognize. I've tried with different USB cables. when camera is opened it gets stuck and shows black screen. i thought this could be a problem with ROM but i was unable to update ROM as my PC doesn't recognize it, i'm able to enter download mode using OSB jig but still odin doesn't recognize it. it has Android 2.2.1 installed on it and it has not been rooted.
View 4 Replies View RelatedI am having MICROMAX A116 android 4.2.1...whnvr i proted my rom the camers doesnt work..i tried samfare, yonip roms etc...but not any of dese roms my camera works..the camera is black nd doesnt click... I am a big fan of samsung ui...so i want to change my rom......
View 1 Replies View Relatedfront camera not working in AbakadaROM v1. how to fix it
View 3 Replies View RelatedI have a problem in my galaxy note gt-n7000 that open camera phone display black screen and wait for 5 sec then show below message attachment
Notes :- I can modify camera setting but i can take picture , i mean that application open normally
I have upgraded my Karbonn A30 mobile from ICS to JB 4.2.2 with the guide lines mentioned in this XDA-forum. I have successfully upgraded to JB 4.2.2, but after upgrading Camera is not working on my Karbonn A30.
Camera is starting but not able to see any picture and also Gallery location in Camera app is not showing. When I capture any image, the screen goes to GREEN colour and it got hang.
I have a problem with front camera doesn't work for me. When i choose to front camera so The screen is black and show me massage: the gallery doesnt work and then show message not connecting ro camera. It doesn't work on all rom.
Sometimes it works and sometimes it does not work. When I turn front camera so the camera is crashed but when I do restart. It working for a moment...after Doesnt work. R800i
What this new Unrevoked2 is about ? I just found the post on AndroidCentral. I am also rooted via unrevoked, only for tethering purposes. Anyhow, here is the text copied straight from AndroidCentral:
Quote:
So apparently the JI6 i odin'd on to the phone may not be a good one? I'm a tad confused and don't remember where i read it but apparently there may be some blocked apps on the app store? Such as what? What do i search for or how do i know if i have a bad JI6 on the phone.
View 7 Replies View RelatedBeen using my iPhone 4 for the past few weeks and finally broke the Evo back out to compare it for a few weeks. When I turned it on I got the notice for update so I did it thinking maybe it would help with the random reboot problem I had been having. Well after the update it sticks at the white HTC screen. I have tried all the basic fixes, held down volume/power, clear storage, recovery. When I clear storage it reboots and hangs at white screen again, if I do recovery I get a picture of a phone with a red triangle with a ! in it. Any way to re-flash the phone or something to get it working? I assume If i can get something on the little SD card but how do I do that when the phone won't work? I'd really like to not have to deal with getting it replaced.
View 7 Replies View RelatedWorked fine this morning...now when I go to take one its extremely blurry. U can barely even see my eyes. I tried cleaning the glass...I even pulled the battery. Any suggestions?
View 4 Replies View RelatedIs it possible to re flash? Here is why I ask... after installing th CL14 update, phone has become buggy. Answer button works intermittently, e-mail won't work. Can I re flash the CL14 update? If so, do I just follow the same steps as the first time?
View 6 Replies View RelatedI'm running rubix focused .5 and bgx theme. I wanted to try out a new theme tho and saw that sometimes installing a theme over another leaves traces of the old and bgx seems like a deep theme. Would I be able to flash rubix again, like the first time,to get to a stock Rom and install the theme from there?
View 9 Replies View RelatedI want to do a wipe and reflash a rom. When wiping though, should i just wipe, then flash while still in recovery, or wipe - reboot - go through the set up, then boot into recovery and flash the rom?
View 2 Replies View RelatedSo, I have 2 backups. 1 is my stock rooted ROM and the other is virtuous. I see them on my SD card but it's not a zip file like the ROMs are, they are in a clockworkmod/backup/ folder. If I wanted to, how would I reflash/restore from the backup?
View 3 Replies View RelatedHow do I reflash 2.1 onto my Droid Eris again?
View 6 Replies View RelatedMy Flash on the camera has stopped working all of a sudden. I checked the camcorder and the light (flash on) didn't work. I tapped the back of the phone near the flash. It worked. I went back to camera and turned on flash, it worked. So by tapping something I jigged something around in there and the flash was working.
View 1 Replies View Related