General :: BQ Pascal 2 Stock Image Reflash
Sep 4, 2012
I am using a BQ Pascal 2 Tablet which is equal to the Odys Neo X7. I installed the german Version of the Odys Neo X7 software, because there was no german or englisch dictionary installed. The ODDYS software works without any issues, but there is also no dictionary included (confirmed by Odys Support)
So i tried to go back to the Stock software, which is a bit faster.I tried to restore the Backup, made with Clockwork (after formatting the device). no success. The device get stuck at the Bootscreen.The same happens if i will install the CyanoMod from this Forum.
The Odys Update uses the RKAndroid Tools to flash the device. BQReaders uses a file named image.img which has to be placed in the root of the internal SD-Card. The update starts automatically after a few seconds. The Odys-Software is not able to do this.
The Image-File from BQReaders is only only one file with a size of 315 MB, not divided in Bootloader / Recovery and so on.how i can go back to the Stock Software? It can be experimental, because i will be able to install the Odys Software by the RKAndroid tools again.
View 3 Replies
Feb 2, 2013
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
View 2 Replies
View Related
Nov 11, 2010
My Evo is rooted, but I have lost my recovery image. Attempts to re flash recovery via ROM Manager and ADB both failed. I now have a task bar message saying the card is mounted read only. I put it in an adapter, plugged into my PC and ran Check Disk, which appeared to restore R/W status. I then put it back in the phone, rebooted and tried to flash a new image with ROM Manager, I have the read only issue again. I still have root, root apps still receive SU permissions, but I have no nand access and cannot re flash CWM or Amon.
View 8 Replies
View Related
Jun 25, 2013
I accidentally flashed the wrong recovery image on my karbonn a4+ using mobileuncle tools . The phone is stuck in recovery mode and I am unable to make a selection in recovery. How can I flash the correct version of stock recovery. i cant factory reset in my phone.
View 3 Replies
View Related
Nov 28, 2013
I just got this phone from HSN, Samsung Galaxy Light model SGH-T399. Well my friend thought it was a smart idea to flash this phone for root and I was at work. So now the phone stuck on the Samsung boot screen.
Need stock Recovery image and stock ROM so I could see to revert it back to working condition as when I bought it.
View 8 Replies
View Related
Sep 11, 2011
Is it possible to extract the recovery.img (the stock one) so that it can be flashed back onto the custom recoveries?
View 4 Replies
View Related
Nov 16, 2013
How to install a stock image on my Acer Iconia A1-810 tablet, I've been stucked in a bootloop, because I failed at rooting it, that i could partially solve using an update via the recovery (it failed but now my tablet can be launched at least). So now, I'd like to install a stock rom to make everything back to normal but I absolutely don't know how to do.
I tried via adb/fastboot but the commands aren't responding on the device.
Also the main problem is that it seems there are no custom recovery available (CWM) for this tablet.
Why I can't update my device using the OTA update (reboot + fail each time), I checked with root checker and others apps like that, no root detected (I uninstalled the root using the toolkit available here [URL] .........
View 5 Replies
View Related
May 6, 2013
I own a complete backup of all partition of the LG P990 with stock ICS, made it with nvflash with a command like this,
Code:
nvflash -r -read <-partition number-> my_partition.img
for all the partition listed in the partition table.
I guess that in someone of that raw image file, (outputted by nvflash), is located the entry system partition, (PartitionId=23 for the LG P990 ICS partition layout).
It's easy for every linux user to mount the raw image file, simply with 'mount' utility.
Browsing them we can find as already hypothesized the entrie android system partition!
If I copying in it the 'su' executable compiled for my platform, it could work?
View 8 Replies
View Related
Oct 27, 2013
I just bought a Samsung Nexus $G LTE phone for Verizon. Previous owner installed a custom cyanogenmod kernel. I don't care for this kernel or setup, how do I install the stock factory Verizon image? Is there an easy way to do it without bricking the phone?
View 7 Replies
View Related
Dec 3, 2012
How To Extract Stock Recovery.img From an android device ?
View 9 Replies
View Related
Jul 9, 2013
i have flashed my p768 with JB rom and now my camera doesnt work. Looking for rooted CWM Nandroid backup of ICS V10B so i can re-flash my p768 from CWM in order to get my camera working again.
View 1 Replies
View Related
Nov 14, 2012
A few months ago I bought two N8000 phones and I was glad they came with full Hebrew menus. But now I bought a device that came without Hebrew.
So I tried to update the version with this method bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
And now the device turns on and works, but the screen remains blank white.
I saw on the forum that people have asked for the problem and you told them they have to replace the DSP_BL file and reflash
The problem is that the links are broken and I can not find the appropriate version for me.
I have tried full and partial update with many versions:12.06.12 firmware.rar
20120705_e1808_v75_jbl1.zip
I downloaded also this tool SP_MDT software fot flashing.rar But I was unable use it
I downloaded also this two packages, (Taiwan101_STAR-N8000_V.05-1.zip + Taiwan101_STAR-N8000_ICS_V.09.zip) but they are not suitable for use with SP Flash Tool v3.1216.05 (they not have scatter.txt file)
View 1 Replies
View Related
Sep 13, 2010
I'm stuck...2.1, rooted via universal androot, Koush Bootstrap, ROM Manager.
I've flashed the newest clockwork mod in ROM Manager. Errors downloading any previous versions.
Download and install Stock 2.2 Image
And this is where I get stuck. "replacing stock recovery with clockwork recovery"... then back to main recovery page. No change to phone. Did I miss a step?
View 8 Replies
View Related
Sep 8, 2010
Question. Not that it really makes a difference, but for those that upgraded to 2.2 using the ROM in Rom Manager (Download ROM -> Stock Images -> Verizon Droid X 2.2) did your bootloader get changed to 30.01? The original bootloader for .604 was 29.01. When I upgraded using the update.zip to 2.2, it changed it to 30.01.
View 9 Replies
View Related
Jul 2, 2010
I have N1 with FRF83, but with custom recovery image and some other customizations. Since I can't OTA update to FRF91 or even 85b from custom images, how do I revert back to the stock FRF83 completely?
View 2 Replies
View Related
Jun 24, 2010
What this new Unrevoked2 is about ? I just found the post on AndroidCentral. I am also rooted via unrevoked, only for tethering purposes. Anyhow, here is the text copied straight from AndroidCentral:
Quote:
View 10 Replies
View Related
Oct 23, 2010
So apparently the JI6 i odin'd on to the phone may not be a good one? I'm a tad confused and don't remember where i read it but apparently there may be some blocked apps on the app store? Such as what? What do i search for or how do i know if i have a bad JI6 on the phone.
View 7 Replies
View Related
Jul 9, 2010
Been using my iPhone 4 for the past few weeks and finally broke the Evo back out to compare it for a few weeks. When I turned it on I got the notice for update so I did it thinking maybe it would help with the random reboot problem I had been having. Well after the update it sticks at the white HTC screen. I have tried all the basic fixes, held down volume/power, clear storage, recovery. When I clear storage it reboots and hangs at white screen again, if I do recovery I get a picture of a phone with a red triangle with a ! in it. Any way to re-flash the phone or something to get it working? I assume If i can get something on the little SD card but how do I do that when the phone won't work? I'd really like to not have to deal with getting it replaced.
View 7 Replies
View Related
Sep 11, 2010
I have a Sprint HTC Hero 2.1 Update 6. Today, I installed universal one-click root app onto my phone from this link : [APP] [ROOT] 1-click root for N1 (Latest ver: 1.6.2 beta 5) - xda-developers and I believe I got my phone rooted. Now, I am hoping to get custom recovery image installed on my phone so that I can nandroid back up my current stock 2.1 based image before installing CM6. I was hoping to try clockworkmod through ROM Manager app. Does this image work in HTC Hero ? If not, is there any other recovery image that I should try for my 2.1 hero ?
View 1 Replies
View Related
Mar 5, 2010
Is it possible to re flash? Here is why I ask... after installing th CL14 update, phone has become buggy. Answer button works intermittently, e-mail won't work. Can I re flash the CL14 update? If so, do I just follow the same steps as the first time?
View 6 Replies
View Related
Oct 14, 2010
I'm running rubix focused .5 and bgx theme. I wanted to try out a new theme tho and saw that sometimes installing a theme over another leaves traces of the old and bgx seems like a deep theme. Would I be able to flash rubix again, like the first time,to get to a stock Rom and install the theme from there?
View 9 Replies
View Related
Mar 31, 2010
I want to do a wipe and reflash a rom. When wiping though, should i just wipe, then flash while still in recovery, or wipe - reboot - go through the set up, then boot into recovery and flash the rom?
View 2 Replies
View Related
Oct 23, 2010
So, I have 2 backups. 1 is my stock rooted ROM and the other is virtuous. I see them on my SD card but it's not a zip file like the ROMs are, they are in a clockworkmod/backup/ folder. If I wanted to, how would I reflash/restore from the backup?
View 3 Replies
View Related
Mar 22, 2010
How do I reflash 2.1 onto my Droid Eris again?
View 6 Replies
View Related
Mar 27, 2010
First off, sorry if this has been posted. I searched all over and couldn't find it so if it is, no need to answer. Just point me in the right direction please. Ok - New to rooting- Sick of waiting for 2.1 ota and wanted to wireless tether, and OC. I rooted and installed the newest smoked glass rom 6.0.1 and accidentally removed some apps I didnt want removed. IE youtube. I heave searched about how to restore youtube and I do know how to do it and start over. Is there a way to get youtube back and keep my customized homescreens and new apps? I have searched here and droidforums.net but most posts say "just reflash." Anyone have a little more specifics? I just dont want to lose all my paid apps and customization time.
View 8 Replies
View Related
Jul 13, 2010
I got tired of the issues with the stock rom (random calls I did not make, phone lockups, battery issues) 2.1 with recovery and root, so I decided last night to reflash it with stock and use the radioactive froyo firmware 1.7.1 from SDX. Everything was fine last night. This morning I've had it lock up on me 3 times. Every time it happens after I hit the end button to turn off the screen. The screen doesn't come back up. I just want a working phone.
View 2 Replies
View Related
Jul 25, 2010
i have a question re the whole process. i used unrevoked to root my desire n used adamg's froyo sense w/o partitioning d sd card. upon boot up to the rom, i noticed that the internal storage has the same storage space left of about only 20mb which is basically the same as with the original rom. i now used rom manager n partioned my sd card 512mb for both ext n swap file. n upon restarting, it now has an internal mem of more than 120mb.
1. Are my partitioning settings correct? 512mb for both ext and swap files? If not, what should be the ideal setings and can please someone explain what ext n swap files are and what they are for?
2. Since I partitioned the drive 'after' installing the froyo sense by adamg, do i need to reflash the rom again?
3. I noticed that after installing a number of apps from Market, it comes to a point that it's stuck at 'starting to download' only after i deleted some other apps do i notice that i can download addtl apps again. is this because of the method i did in installing the new rom?
View 5 Replies
View Related
Mar 23, 2010
I'm running the 2.1 leak and so far it has been flawless. My battery life has improved, however today something odd is happening. I am getting constant updates from my gmail saying I have a new email, when my inbox is the same. Do I need to reflash? I'm using one of the original patched versions.
View 4 Replies
View Related
Jul 15, 2010
Check this out:
unrevoked3 recovery reflash tool, v3.0
View 49 Replies
View Related
Aug 4, 2010
I just unrooted and installed the leaked radio update so i would have less bugs with the froyo ROMS.
I installed the radio perfectly fine, but now unrevoked isn't working for me. I deleted all of the previous files and reinstalled them (sdk folder, usb drivers, reflash)
when i run the reflash tool, it gets stuck after rebooting, says "waiting for reboot..."
As the phone rebooted, it changed to "Flashing recovery image. Do not touch your phone!" but instead of into recovery, it just continued to restart the phone as usual
View 11 Replies
View Related
