General :: Navon Raptor 7 - Storage / ADB Drivers
Sep 17, 2013
I have recently bought the Navon Raptor 7. The internal storage is a bit too small for the apps I want to install and I would like to make the SD-card the default install location.
I know there's ways to do it though ADB, but I just can't get any of the drivers for the rk3066 working. Most of them say that they couldn't find the correct software for my device or that the driver was found but that there was an error during installation. My operating system is Windows 8 64-bit.
View 1 Replies
Oct 28, 2013
I have Navon Platinum 10 and I bricked it.I can still upload firmware to the device via Livesuit.All I need is stock or custom firmware.Device is based on Allwinner A10.I tried many roms, but i couldn't find working ones. Best firmware i have found runs, but touchscreen and button's don't work.
View 1 Replies
View Related
Jul 20, 2010
Do you need any drivers install extra to connect phone thru usb mass storage mode?
View 1 Replies
View Related
Nov 12, 2010
Trying to follow directions, but I'm not as computer literate as I thought.... where do I find GScripts? Can someone walk me thru all the steps easily? Very much a noobe. Need it in layman terms.
View 2 Replies
View Related
Oct 21, 2010
So with 2 ROM's out now everybody want's to know the "under-the-hood" benefits of both ROM's. Both Velocity and Raptor report 6.8 MFLOPS with Linpack, no OC, just the Turbo. Testing battery on both, will let you guys know tomorrow.
-ILL RUN SOME SERIOUS STRESS TESTS ON BOTH ROM'S TO SEE WHICH ONE CAN HANDLE MORE RESOURCE USE BEFORE A BUNCH OF FORCE CLOSES POP-UP OR PHONE STARTS FREEZING.
My opinion: In my opinion Velocity is snappier but I'll post more on this by tomorrow so check back!
View 20 Replies
View Related
Nov 15, 2010
Raptor mm themes. so far Ive seen none
View 2 Replies
View Related
Dec 4, 2013
How to stop phone from displaying "low storage, uninstall apps to free storage. "
View 3 Replies
View Related
Aug 23, 2013
I've bought this chinese clone of the SIII, it's a MT6575. It's great except for the internal storage, which supposedly is 500MB but there seems to be an invisible SD storage which is 2GB. It's really confusing... When I go to Settings -> Storage there are 3 memories: "Internal Storage" (claims to be 4GB but it's fake, it's actually 500MB), "Phone Storage" (claims to be 16.5GB but it's probably 2GB), and finally my SD, "SD Card" (32GB).
The thing is, I'm having problems downloading big apps because apps go to "Internal Storage" which is 500MB only, and which files are stored in the "Phone Storage" (maybe internal & phone are actually the same?). However when I go to Settings -> Apps, on the "Downloaded" tab, the apps are in "Internal Storage" (500MB), and on the "On SD Card" tab, it shows that apps are in "Phone Storage" (the ones I moved to SD). This means my 32GB SD isn't being used by the system when I send apps to SD probably.
Also, my 32GB SD card is found in /mnt/sdcard2, and the /mnt/sdcard... I don't know which storage is that.
So basically all this is happening because I tried to Link2SD with my 32GB SD doing all the 2 partitions stuff and so, but Link2SD never detects the "secondary SD" which is the 32GB SD, as this fake SD card, "Phone Storage", is probably what the programs thinks to be the SD card.
View 4 Replies
View Related
Sep 13, 2013
On my galaxy tab 2 7, with Android 4.3, I have two choices of memory storage, emulated and extSdard. Im wondering if the emulated is actually on a like Cloud system or are the files still on my tablet? Also, if emulated storage is for multiple users, does this mean another device is connected besides my tablet?
View 1 Replies
View Related
Oct 28, 2010
Had been running great for me and now im stuck in a boot loop at the android screen after leaving on barnacle wifi tether until the batt died. (running Raptor) It boots fine with Velocity
View 13 Replies
View Related
Feb 1, 2013
I'm running a GOCLEVER R75 tablet. I succeeded in installing the USB drivers to Windows XP pro from the last SDK I downloaded previously.But I can't install other drivers:
C:> c:AndroidSDKadt-bundle-windows-x86sdkplatform-toolsadb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
Although I can see in Windows Device manager Android Phone - Android ADB Interface, some applications still write they can't see my Android device. I also can't see the tablet number.
View 4 Replies
View Related
Sep 22, 2013
I boot my Acer Iconia Tab A200 into fastboot mode (robot lying down and RED exclamation mark over it). I plug it into my Windows 7 (64bit) desktop computer with SDK installed, and from the directory with fastboot.exe I type FASTBOOT DEVICES but the device is not being seen, it just goes back to the prompt, like the command executed but didn't do anything. I assume this is because the drivers aren't installed. But I don't know how to install the "adb drivers".
View 4 Replies
View Related
Mar 2, 2013
I'm trying to use the SWM and when I have everything all set up it tells me I have no device set up. I looked to see if I could find drivers for me Xperia X10 and all I kept getting linked to was the sony PC companion that apparently had those drivers installed. When I installed it and did all the set up stuff it still wouldn't recognize my phone other than as a removable disk. I have the USB debugging turned on, .Net framework installed, and supposed the drives yet it still won't read my phone.
View 1 Replies
View Related
May 15, 2014
I take the CyanogenMod 10.3 for my Alcatel OT995, it works fine on my device, but I can't use adb command line neither other features using adb.exe ! I can only access to storage mass device, so I think I have a problem with the USB drivers which connect ADB command to my phone. I can add that before I've installed this Rom on the device, I've installed many drivers on the PC :
Firstly I installed the owner's driver provided by Alcatel in the AlcatelAndroidManager.exe package,
secondly I installed the Google USB drivers provided because I'm using Android Virtual Devices (AVD Manager) to do some developping works. I used to launch adb with "adb start-server" so it's still working, I don't obtain any device in the list with "adb devices", why don't I get it ?
I've realized some cleaning actions : I uninstalled the USB drivers of Alcatel's software, I uninstall the Google USB driver , to finish I reboot the PC but it don't changed anything I tried to apply this (well explained) post without any success :URL.... I can't find "Android devices" category, neither "Usb Adb" entry... so my device is not recognized in the "Settings Panel". However the storage mass device appears as a volume named "
View 1 Replies
View Related
Oct 10, 2012
How to do this? is this possible? if yes, where is the driver.
View 5 Replies
View Related
Sep 23, 2012
I have been trying to root my Micromax A25 but to no luck. And I have been unable to find the drivers for it.
View 2 Replies
View Related
Dec 24, 2013
I cannot find out how to add drivers to a ROM
I don't have a backup of the stock ROM, however i have a ROM in which everything apart from WiFi works ( 5 point touch screen, all hardware buttons, sound, screen)
This Q88 ROM is downloaded from [URL] .....
I tried the cyanogenmod ROM from ANONFBI [URL] ..... and nothing works apart from the wifi driver no touch, no volume buttons
I would like to extract the drivers from the q88 rom and add them to the cyanogenmod rom.
I've never been able to get the camera working its the single front camera it doesn't bother me its not very good
I tried this thread [URL] .....
However when i load a driver the ported PORTED JB-4.1.1 rom doesn't boot up
I see it has camera drivers but i dont know how to install them
I have attached a LSMOD from the q88 rom
View 4 Replies
View Related
Jun 1, 2014
i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. I am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work.
View 9 Replies
View Related
Nov 30, 2013
Windows 7 (64 bit) Dell Desktop PC and my lovely new Sony Xperia Z1 trying to send files via Bluetooth rather than keep plugging and unplugging the USB cable and risk breaking the cover. well that was my plan anyway.The Dell didn't come with Bluetooth so I bought a wee plug-in USB Bluetooth unit. I have managed to copy a couple of files but it took ages to get it to connect properly and now it won't do it at all.There are 4 driver messages under hardware which all show problems with Bluetooth peripheral device and no drivers installed, but I can't find any anywhere?
View 1 Replies
View Related
Jul 30, 2012
I have a Chinese touch pad. I tried to install several custom rom (CM9, AOKP, etc ...) as well as Roma manufacturer of tablet very similar to mine (A90 Ampe, Sanei N90, etc ...).The flash firmware or install via Recovery is done very well. The android starts very well. However, the only problem I have is that my touchscreen is not responding.Indeed, I have to connect a mouse to use my tablet.
I love and I think it is possible created a sort of patch to apply via the recovery or via command ADB with the "drivers" of my touchscreen from my original rom.
I already recompiled the image of my ROM so I have access to the entire file structure. But I do not know enough to identify which files that match the drivers of the screen.
View 1 Replies
View Related
Mar 27, 2014
I own a Moto G (Global GSM) running CyanogenMod 11 rooted with TWRP recovery and the bootloader is unlocked. I have been trying to go back to the stock firmware using this guide: [URL] ..... but I have a problem. The adb drivers for my device work fine when I am in the system or in the recovery, but don't work in the bootloader. I am able to type "adb reboot bootloader" when I'm in the system/recovery and it will follow the command, but once I get into the bootloader it stops. When I type "adb devices" a line saying "List of devices attached" comes up with nothing underneath it.
View 5 Replies
View Related
Jun 13, 2014
I've looked everywhere and tried every method I've come across including, reinstalling kies, removing upperfilters in regedit, updating wmp, reinstalling drivers. Nothing seems to work.
When I try to reinstall the samsung drivers it comes up with access denied. I've got a galaxy s4 mini and tab 2. Same thing happens to both.
View 2 Replies
View Related
Dec 2, 2012
I am not quite experienced.I bought yday the xtouch x907 (9.7 tablet) running android 4.1.1 and i want to root it.I have used the bin4ry v17 but not resluts i cannot also trace the drivers for my pc).
i own an xtouch x506 (mobile phone) and i rooted it wih bin4ry however with this tablet (ie the x907) i have not managed to do anything.
View 6 Replies
View Related
Mar 1, 2013
My problem is as follows: I'm having trouble rooting one of my customer's Android tablets (DIT 1010) version 4.0.3 and kernel version 3.0.8. (As far as I can tell there's no custom skin)
From what I've gathered Android knows 3 modes and ADB mode is the one that has to be active for me to be able to root it. However Windows stops recognizing the tablet once I've enabled USB debugging.
I've tried installing google android drivers, didn't work. I kept digging and found out I had to manually add my tablet's device ID to the .inf file. I tried this but still no dice. To be more specific these are the lines I've added (Without the Google.NTx86 and Google.NTamd64 lines, they're just for clarity):
[Google.NTx86]
; Android ADB Interface
%SingleAdbInterface%= USB_Install, USBVID_2207&PID_0006
%CompositeAdbInterface%= USB_Install, USBVID_2207&PID_0006&REV_0222
[Google.NTamd64]
; Android ADB Interface
%SingleAdbInterface%= USB_Install, USBVID_2207&PID_0006
%CompositeAdbInterface%= USB_Install, USBVID_2207&PID_0006&REV_0222
I can't really find anything about this tablet and apparently the ADB drivers are device specific.
View 1 Replies
View Related
Jan 4, 2014
I am trying to install an external WIFI antenna on my tablet (BQ Maxwell 2 Plus, rooted, CM10.1). The model of the antenna is TP - Link 722n.I have downloaded the drivers from backports project and, after compiling them, I have 8 .ko modules:
- ath.ko
- ath9k.ko
- ath9k_common.ko
- ath9k_htc.ko
- ath9k_hw.ko
- cfg80211.ko
- compat.ko
- mac80211.ko
When I try to insmod the cfg80211.ko module, an error occurs. The dmesg output is:
Code:
cfg80211: exports duplicate symbol __ieee80211_get_channel (owned by kernel)
View 1 Replies
View Related
Oct 8, 2012
how to edit the touchscreen driver? Problem is on the Asus Transformer Prime TF201 none of the replacement touchscreens have a proper X-axis, they're all inverted. I wanted to try my hand at editing the driver(s) that control the digitizer.
View 2 Replies
View Related
Sep 23, 2012
I want android USB debugging Drivers for Windows7 bit32.
View 1 Replies
View Related
Mar 16, 2013
How to install the MTK 6577 drivers for Windows 8 ?
I tried with the Windows 7 64 Bit versions. But still SP Flash tool cannot detect the Phone (Micromax A89 ) In the flash mode( with the VOL+ and USB connect)
View 3 Replies
View Related
Mar 5, 2013
I recently got a steelseries free controller and I have been looking to modify the driver to support a RT button because a lot of games nee that in order to play correctly. It uses the zeemote driver
View 1 Replies
View Related
Jun 15, 2012
I have two tablets but on of them I've flashed and messed up (touch screen is not working).
How can I get this to work? How can I get the touch-screen drivers and replace them?
View 1 Replies
View Related
