General :: LCD Density On SGY GT-S5360
Feb 14, 2014
I have a problem with my sgy s5360 (rooted). i recently changed my lcd density in error and instead of the 120 default setting, I changed it to 288. that was really frustrating. I haven't been able to fix it myself. I have already done the factory reset but that didn't work. I used the ROM toolbox. Now my sgy is like in a zoomed state. Large fonts, cannot unlock and change to default setting. I cannot click the android icon that can be seen when you reboot your phone and did the factory reset. assistance is badly needed. i have browsed through the theads, but this issue has not been addressed.
View 1 Replies
Nov 15, 2010
I read the official document about supporting multiple screens http://developer.android.com/guide/practices/screens_support.html
According to that document, I should just create different directories for different resolultion.
Now the question. How to support devices with normal screen and high density or low density?
I ask it because, there are two posibilities (WVGA800 (480x800) and WVGA854 (480x854)) and (WQVGA400 (240x400) and WQVGA432 (240x432)) and I don't know where to store some background images for them.
I would take drawable-normal-hdpi or drawable-normal-ldpi, but how to make difference between 480x800 and 480x854 or between 240x400 and 240x432?!
View 1 Replies
View Related
Sep 20, 2012
i was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.
View 9 Replies
View Related
May 27, 2012
I'm now using galaxy y s5360. These days my phone keep rebooting itself after i connect the phone to pc by usb. I'm afraid it is because the v6 supercharge thing thats make that way.
View 2 Replies
View Related
May 21, 2012
I would like to use a different carrier on my phone but it is locked. How do you unlock it?
View 4 Replies
View Related
Jul 22, 2013
My samsung galaxy y s5360 turns off itself very so many times in a day. Mostly i have to restart it or once in a while it restarts itself.
View 4 Replies
View Related
Jul 22, 2012
How To Flash Stock Rom Using Clockworkmod on a gt s5360 ???????
View 3 Replies
View Related
Mar 14, 2013
How to update Samsung GT-S5360 2.3.6 to any 4.0 or updated version ? Build version is GB.DDLK2
View 3 Replies
View Related
May 10, 2014
yesterday, i tried to update my samsung galaxy y and cleared the factory settings , data, cache etc. and when i tried to reboot the phone it remained at the samsung logo and it has been there ever since.
i have tried installing odin but when i try opening it after installation, it flashes and close meaning that i can not access it. i have been on this since 5 am today and things just seem not to work out well for me
View 1 Replies
View Related
May 4, 2012
I have a Samsung Galaxy Y. I got it about 2 months ago and used a stock rom that wasn't from my region on it. It worked fine even with root till about 2 days ago. Then I decided to reboot my phone but it entered a boot loop. I flashed my region's stock rom on it (DDLA1) and then I updated it to the latest version (DDLC3). I thought that since it was using a stock rom it wouldn't get bricked but after rooting my phone again to restore all my apps and data using Titanium Backup it got an unexpected error but it wasn't even immediate. I got the error about 30 minutes after rooting my phone. The error, however, didn't stop my phone completely. It just force closed the app that I was using. But after I rebooted to put in my SIM card it entered the boot loop again.
Some extra info:
Since I'm using Go Launcher I uninstalled my Samsung Home screen, keyboard and any other apps that I don't need.
2) Is there any other way to back up and restore my device.
3) Could any of my previous attempts at unbricking cause this. It worked every single time but each time the same thing happened. It got bricked again after about 30 minutes after bricking. (That's 30 minutes of time that I used the phone. It didn't brick when my phone was sleeping for an entire night.)
View 4 Replies
View Related
Nov 30, 2013
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
View 4 Replies
View Related
Jul 31, 2012
Yesterday i tried updating my android to Ice Cream Sandwich following some tutorial i found but i missed a step and didn't downloaded Clockworkmod Recovery or made any backup , and i think that USB Debugging is off because my pc doesn't recognize the phone ... I tried going into Android system recovery and clearing data and cache , and i tried with odin mode by pressing volume down, home and power but i got stuck on downloading screen for 2 hours so i gave up ... Now only thing left on my sd card is ics aura rom..
View 3 Replies
View Related
Apr 2, 2014
How to install and play CLASH OF CLANS game in samsung galaxy y but unfortunately no luck...
I already tried downloading the apk then install it manually but didnt work. when i use google play after searching the game error message popup and says that "this version doenst support bla bla bla..." i just want to play it in my phone.
View 3 Replies
View Related
Jul 22, 2012
Whenever i start my samsung galaxy y s5360 screen appears completely white like a flashlight, but the phone is working i can recieve callls on my phone but cannot see anything on my device. even in dwnld mode & recovery mode the same problem persits, i cannot see anything .
I have installed custom creed v2.0 rom on my android device. Recently i have replaced motherboard of my device. Under Warranty.
I Want To Flash stock rom on my device but i cannot see anything on my device so i am unable to flash my device.
Another problem is that when i enter download mode odin detects my device but when i try to flash the rom it says unable to open com port.
At Present my device is working properly but when i restart my device the problem returns !!!!!!
View 1 Replies
View Related
Oct 20, 2012
I always used LCD Density Modder Pro for the Play Store Fix for my SGS3, but now i noticed, that it's a very outdated version of the Store and i even can't buy anything, because it always says: Packagefile is invalid.
Is there any alternative modded Playstore around for a Density of 320?
View 3 Replies
View Related
Feb 10, 2014
My galaxy s3 is rooted and cwm installed.I have changed a default dpi and rebooted to find my self in constant boot loop.I'm at the brink of flashing my rom to a custom one to see if it works but very scared to do so especially not knowing much about it.I have performed hard reset by going into recovery mode but it didn't work.
View 9 Replies
View Related
Nov 16, 2012
Due to my changing of the screen density i can't get it via play store. can't see a working link on google either.
View 9 Replies
View Related
Feb 14, 2013
Im running O+ plus 9.7 pad android ICS 4.0 rooted.
I changed the LCD density by editing the build.prop after reading after changing it am now in boot loop.is there any hard reset on this device?
an i tried plug in into the PC but my device cannot be detected ..and it cannot load the OS in my device it's stuck on the bootanimation.
View 1 Replies
View Related
Oct 18, 2013
My tablet bootlooped after changing density from 120 to 160. Now adb doesn't even work. My tablet is a20 q9pro. I've tried pinhole reset. How to get to recovery?
View 1 Replies
View Related
Jun 7, 2013
I have karbonn titanium s5 not a very popular phone. It doesn't have any custom rom.. I rooted it and tried to change lcd density using lcd density modder app from google play phone doesn't boots up anymore.
I see the screen when device turns on then i hear the boot animation but i cannot see the boot animation. I have cwm accesable on the phone and can also boot it into fastboot mode. I have a nandroid backup when the phone used to work but its not restoring it says md5 mismatch.
There's no stock rom for my phone available but i have extracted the system folder from nandroid backup.
View 1 Replies
View Related
Aug 6, 2013
i have samsung galaxy star i just rooted it 30 min earlier then changed the lcd density to 320 orignally it was 120 so me bcoz my mobile is soft brick... when i start it i just see the logo and adter it it is blank?
View 1 Replies
View Related
Jan 21, 2014
I made a home screen just with Zooper and Tasker. Yesterday I changed the density to get everything smaller. Afterwards I changed the density back to original for my Launcher and for Zooper (With AppSettings).
Original Density: 320
Changed to: 270
Now I have the Problem that I can't click many of the created Widgets. I have multiple Text Elemts and Icons which dosnt react when i click them.
Now I tested a bit and found out that if the Text/Icons are much bigger I can click them (i.e. Textsize 40).
So i think i have to change the density for something else, but what? GT-N7100
View 2 Replies
View Related
Aug 29, 2010
LCD Density Changer for Android, LCD Density Changer Application v3.0 Released | xda-developers Dev Thread [APP] LCD Density Changer 3.0 - create HighRes screen effect - xda-developers I set my EVO to 200. made things way way better! Some text on the MENU in LauncherPro are cut off, but nothing i cant deal with.
View 49 Replies
View Related
Oct 2, 2010
I'm running cm6 and the Galaxy S Theme. I would like to run my density at 160 because I really love how tiny the icons look on my screen. However, when I run the density to that setting my notification menu bar no longer stretches across the top of the screen, it appears as a small square in the left hand corner. I also have the same problem in the market place, where the grey background should stretch across behind where it says "market". My friend runs his at 160 and has no problems like this, however he is not running cm6 or the theme I am. So, while it doesn't really narrow it down any, I'm sure the problem is in one of the two, more likely the theme in my mind. Any idea's how I can fix or repair this problem?
View 9 Replies
View Related
Oct 4, 2010
Has everyone seen that you can change the LCD density on the Desire? (Well, on all Android handsets really). It simulates a higher resolution, fits more text on screen etc. There's an app on the market which does it, although it won't work on the Desire unless you're S-OFF. All you need to do is extract the build.prop file from /system to your PC (in recovery, use ADB PULL), and using a text editor change the value of LCD Density from original 240 to 200, then ADB push it back and reboot. I'm *really* pleased with the result. Combined with Launcher Pro I've a whole new feel to my phone...
View 8 Replies
View Related
Sep 20, 2010
Running Incredible with Froyo. I rooted using Unrevoked3, but I forgot to make the nandroid backup, I guess. the LCD Changer app has my reboot looping. After the very first HTC Incredible screen it goes totally white and I just hear the "Droid" voice(plays when the red droid eye comes up on screen normally" nothing but white and the voice just repeats after the screen flashes every minute or so. Tried applying the update.zip that was linked to on the developers blog, but no luck. Any ideas? I even tried resetting to factory defaults, formatted everything, basically. Lost a great of data, I'm afraid, but I just want my phone back.
View 14 Replies
View Related
Aug 31, 2010
People seem to be having problems using the LCD Density changer app, so I am making this write up to help you out If you would like to make your Droid X look like this.
View 35 Replies
View Related
Nov 25, 2010
I don't know if anyone else is as addicted to a 200 LCD density as me but the LCD density changer app was causing FC like crazy. So I thought there had to be another way. It's real easy, and takes 5seconds to do...
1: open root explorer and go to /system
2: open the build prop and locate the line about half way down that says 'LCD density = 240.
3: change the value to 200 and save (it will automatically create a backup in case of a Rom issue)
4: reboot
I'm sure you can copy the build.prop file to your computer and edit and reinsert the file or use astro + god mode script on some Rom. Just be sure to make a backup as root explorer is the only one I know of that makes a backup automatically.You will notice the clock is smaller as well as a host of other great changes. I'm addicted to a smaller size but there are a few issues I've found.
View 6 Replies
View Related
Oct 21, 2010
I'm wondering if it is possible to inflate a layout using a different density value than the default system density. I have a high density layout, which looks good on the Galaxy Tab (1024x600px, hdpi) and I like to use the same layout on another tablet with the same pixel resolution but medium density. The mdpi layout which is used works on the device but the screen just looks really empty and I would prefer to scale things up. So is there a xml argument for scaling the layout, maybe something similar to Bitmap.Options.targetDensity. Or could this be done with a new LayoutInflater class?
View 6 Replies
View Related
Jun 9, 2010
A lot of hay is being made over the iPhone4's 326 ppi screen density. I was just curious, for comparison purposes, what's the pixel density of the Evo screen? This would be an easy calculation to do if I knew what the horizontal and vertical dimensions of the screen were, but I can't seem to find that information anywhere.
If anyone knows the pixel density or even just the exact X and Y dimensions of the screen..
View 49 Replies
View Related
