General :: I9100 Partitions - How To Merge In ADB
Jan 24, 2014
I had an encrypted I9100 on Cyanogenmod 9. After a factory reset I installed Cyanogemod 10.1. Everything runs smoothly, but about 12gb of my internal sd space was misplaced during the installation and is now missing. Only 2 gb is currently available. /sdcard cannot be mounted, something about /sdcard/android_secure
I ran some commands in adb, and the space is still there, but it needs to be replaced / repartitioned somehow.
df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 395.6M 48.0K 395.6M 0% /dev
/dev/block/mmcblk0p7 98.4M 87.0M 11.4M 88% /cache
~ # mount /data
[code]....
View 3 Replies
Aug 15, 2013
I have SONY XPERIA tipo with 803MB Internal Sotrage and 2.20 GB.
I have rooted the phone, and set external 32GB card as the default SD card (i.e. phone thinks its internal memory is 32GB) via changes in /etc/vold.fstab file.
The result is that phone regards the 2.20GB space as external memory.
I can move many applications to 32GB card, however some applications e.g. BusyBox, GCC Toolchain, and Chrome are not movable to Internal storage (32GB) or external storage (2.20GB).
Since the 2.20GB space is of no use for me, and it is mounted under the same device where "phone memory" 803 MB is mounted i.e. :
/dev/block/mmcblk0 = 3909 MB
/dev/block/mmcblk0p11 = 524 MB
/dev/block/mmcblk0p11 = 167 MB
/dev/block/mmcblk0p15 = 803 MB
/dev/block/mmcblk0p16 = 2311 MB
Surely, the last partition "/dev/block/mmcblk0p16 = 2311 MB" is the free storage not being used, and "/dev/block/mmcblk0p15 = 803 MB" is the phone memory, which I want to extend/increase.
My question is: Is it possible to merge the alst 2 partitions (e.g. by formatting 2.2GB space and then merging it with the 803MB space. This way my phone will have its system memory pretty large, and I will be able to install more applets through BusyBox as well as Chrome etc.
View 3 Replies
View Related
Feb 6, 2013
I have a generic Allwinner A13 7" tablet essentially identical to this one. The internal memory is set so that part of it is seen as internal, and part as a fake SD card mounted on /mnt/sdcard. Actual SD cards get mounted to /mnt/extsd.
I find this very annoying for a number of reasons, and would like all the internal memory to be seen as internal with no fake SD cards, and SD cards to be mounted to /mnt/sdcard. If this were one of those tablets capable of running Linux I'd run gparted and do the job from there, but it isn't.
Is there any way to merge the two internal memory partitions into just one?
I'm aware I can edit vold.fstab and invert the two mount points, and I'll keep it as a fallback solution, but I hate the idea of wasting a gig of useful internal space like that.
View 2 Replies
View Related
Sep 26, 2013
how to increase size of /system and decrease size of /data? (huawei mediapad)
View 5 Replies
View Related
Jul 9, 2013
I recently acquired an A13 tablet and wanting to install CM10 on it I first installed CWM 6.0.2.8 according to the famous manual (if it's relevant I'll post the exact url). Anyway, it got stuck on CWM (doesn't boot normally). Now I figured it can't install since using 'adb shell' and looking at /proc/partitions -- nothing is there!
"""
cat /proc/partitions
major minor #blocks name
179 0 15558144 mmcblk0
179 1 15554048 mmcblk0p1
"""
So I have no internal memory to use -- no internal memory to install to, right?
"""
ls /dev/block
loop0 loop2 loop4 loop6 mmcblk0 nandf ram0
loop1 loop3 loop5 loop7 mmcblk0p1 platform ram1
"""
Seems that only nandf exists, which means I can't cat into nandg and sync and install new img. Right? Or am I missing something? How do I fix this?
View 9 Replies
View Related
Mar 20, 2012
My GS2 is unbranded Romania CSC is under (COA). When will I get the 4.0.3 update?
View 1 Replies
View Related
Dec 25, 2013
I'm looking for some custom Jelly Bean 4.3 Roms based on official Samsung Rom for my i9100, so it would have Touchwiz also.Currently i keep switching between CM10.2 (4.3.1) and Wanamlite 14.7 (4.1.2).
I like Wanamlite just because it uses the Samsung Touchwiz interface i like so much. Other than that, any other stock Rom, rooted and debloated would do just about the same.What i like about CM10.2 and cyanogenmod in general is the speed and stability the Rom feels like. Also, the latest 4.3 Roms gave me infinitely great battery lives compared to any other JB Rom i tried since. And judging from other posts and reviews on the internet, Google worked their magic on 4.3 for small batteries run through the day (almost double the life of 4.1.2 or even worst 4.2.x). So it seems the perfect combo for me would be a 4.3 custom with TW.
View 2 Replies
View Related
Mar 13, 2013
I have a Galaxy SII running Samsung 4.1.2 ROM rooted and deodexed, but the /system folder only has a limited amount of space even though I have 16GB internal memory, is there a way to sacrifice some usable memory to get more /system memory so I can add some stuff to /sysem/app etc?
View 9 Replies
View Related
Feb 8, 2014
My phone has 4gig of internal storage, but the system seems to be using only 3 500mb partitions... /system, /cache, and /data... and a couple of other small partitions.
At the end of mmcblk0 is p6 that is about 2GIG and NOT MOUNTED! Is that space needed for something, or can I add it to /data (p5)? or create a mount point for it? and if so, HOW?
View 1 Replies
View Related
Oct 18, 2012
Is a nandroid backup creating new partitions when it is flashed?
What happenes, if a Nandroid backup was created from a 2 GB SD card and is flashed onto a 8 GB SD card? - size mismatch error?
€dit:My Phone has an internal SD Card - normally not accessible.
I changed it from 2 GB to 8 GB - phone is working properly.But what about existing Nandroid Backups?
View 2 Replies
View Related
Nov 3, 2013
Where are they? I checked the framework-res and SystemUI of an AOSP rom, and they're just not there.
View 6 Replies
View Related
Feb 2, 2012
I've got a Motorola Flipout, just yesterday night I was copying and moving files to /system/bin (having root).
Lik this:
Code:
cp /sdcard/binaries/iptables-save /system/bin
But then I have did something wrong, typed something like this instead.
Code:
cp /sdcard/binaries/rfkill/system/bin
That throws me an error (normal) but then everything was screewed up.
The files and folders have been dissapeared to `ls` command.
`ls /` shows / doesn't exist.
`ls` shows nothing.
when i enter to accounts it reboots, doesn't detect sdcard partition...I do a rollback with a partial backup from 30 days ago, and still appear nothing.
It's like the partition system have been screewed up.This can solved reflashin again with sbf_flash ?
View 1 Replies
View Related
May 15, 2012
I'd want root access is to install Titanium Backup or a firewall to freeze/block access to a certain Chinese Android Market app. The app in question sends out a notification to feature new Chinese apps everytime the phone is given internet access and there are no options to disable it within the app itself. And since it came with the phone, it cannot be uninstalled, and of course, it restarts immediately if stopped.
One-clicks do not work-- they all result in directory/permission errors. For example, superoneclick will hang on step 7 and doomlord's method would reboot the phone without making any changes.
It would seem my only resort would be to use a different ROM, but there are no ROMs for this phone. Of course there are methods using similar MTK 6573 phones which are usually just clones in different casings, but I've read that using non-specific ROMs will result in a brick as there are slight differences.So how should I go about rooting this phone? What are the risks of using a non-specific ROM?
View 9 Replies
View Related
Jul 9, 2013
I'm on gs2 I9100 cyanogenmod 9 and can't find a solution to encrypt internal databases like sms, call logs, contacts... ( so in /data).
No problems with documents in container created by luksmanager. But i wonder is it possible to make a sort of preboot script who mount after correct passphrase a luks container who is symlinked in /data ? Because android ics built in encryption installation stop at beginning.
Is there now new method or app to encrypt full or partial phone? Maybe new encryption function or improvement in JB? Pattern/face unlock fixed?
View 5 Replies
View Related
Mar 15, 2013
is it possible to repartation the internal Storage on a i9100?
2Gb for Apps is too small.
And i not using 11GB for files
Can i modifi the Pit file with PIT Magic
I want 4 GB for Apps and 9Gb for files
View 3 Replies
View Related
May 15, 2014
I'm a Galaxy S2 GT-i9100 user and I wanted to know how to run touchwiz in tablet mode. Do i have to decompile SecLauncher2.apk and edit the code so that it becomes accurate when using with landscape mode or is there an xposed module. Or do i edit build.prop file? I don't want to install other launchers or get ParanoidAndroid.
View 3 Replies
View Related
Feb 25, 2012
When I got my phone at the end of last year I rooted it using a Chain-Fire kernel - v 4.2, I think. After flashing, it worked perfectly, since when I have flashed the old bootloader to get my USB Jig working to remove the yellow triangle and flashed a patch again to allow the USB Jig to reset the binary counter.
I have very much wanted to install and get the new Sky Go application working.
What I had to do was flash the Stock kernel for my Stock Rom - I have never messed with my Rom - it is Gingerbread 2.3.4 in a CPW phone here in the UK.
Doing the flash and installing Voodoo OTA (to temporarily hide my root) has been enormously successful
Now then to my query....
The original Chain-Fire mod v 4.2 installed CWM.
After of course cancelling the "hide root" function to show my phone as rooted once more, I went to do a backup, using CWM but it refuses to work. It says my kernel needs v 5.0. Obviously the Stock Rom I flashed to get Sky Go working has thrown CWM some what.
I have downloaded Rom Manager from the Market but this seems not to work either - it starts to work (reboots) but then halts with the following messages: -
E : failed to verify whole-file signature
E : signature verification failed
Installation aborted
What I would like is some way of installing a backup previously made before flashing the Stock kernal and also to make a fresh backup now.
View 3 Replies
View Related
Jul 26, 2013
For the last 5 days I am experiencing extreme battery drainage(Android OS nearly 100% Battery Usage ). Back when it began I did not install anything suspicious or battery consuming software. I never go full screen brightness, and all unnecessary apps are either deleted or disabled. I have tried Factory Resetting, Wiping all possible caches, systems, internal/external SD cards. I even tried manually deleting all folders from my PC. I have tried installing custom kernels, roots and even stock ROM. Right now I'm with stock ROM with CF root.
Phone state: Model number- GT-i9100; Android 4.0.3; Baseband v. i9100XXLPS, Kernel v. 3.0.15-i9100XXLPQ-CL223505 se,infra@SEP-94 #3; Built number IML74K.XWLP7. And here is what I get from the battery report :
i41.tinypic(dot)com/1j9nae.png
I have tried full discharge and charge to 100% and calibration. Even cleared the battery stats It just doesn't work. I am using Nova Launcher. Even after going back to TwLauncher I am still getting 98% Android OS usage. I don't use Data Mode and Wi-Fi isn't always on. When charged and calibrated at 100% at 21:00pm, in the morning at 9:00am phone battery is completely empty and shut down.
I'd like to use the stock ROM, with a nice battery stable kernel & still with Nova Launcher. NOTE: This is still happening with a NEW battery.
View 1 Replies
View Related
Aug 30, 2012
How do you turn them off? Some or even ALL!
View 9 Replies
View Related
Nov 1, 2011
Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.
I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.
# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions
What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.
Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d
What I have looked at so far: [URL] .....
View 2 Replies
View Related
May 15, 2014
I am a galaxy s2 gt-i9100 user and i use touchwiz launcher in landscape mode. I have edited my launcher to look like a tablet for my s2 but i wanted to know how to hide the dock from the launcher or move the app drawer icon on top right or bottom right. Is there a way to do this? Also i dont want to install a different rom or launcher.
View 2 Replies
View Related
Apr 3, 2012
Recently, my phone is leaking power in a crazy speed. (i9100 4.0.3). Before sleep, I turned off bluetooth, wifi, 3G, gps, all motion sensors. Switched it to flight mode. After about 7-hour sleep, 10% battery was lost. This happened for the last few month.
I installed DX BatteryBooster, from its monitor I learnt that almost all the power went to Android System, if click at it, it says included packages:
Remote Device Management Service.
Software update
Video Maker
What are these services how do I turn them off?
View 3 Replies
View Related
Mar 21, 2012
So i got a samsung i9100 with ics but the problem is that the font colour in menus are black with grey background which makes it difficult to read it.......is there a way to change the font color ?
View 1 Replies
View Related
May 11, 2014
im a galaxy s2 gt-i9100 user and how do i make my status bar thinner as it is taking up a bit of space?? Do i decompile systemui.apk or seclauncher2.apk? And what line is it to edit? I do not want to change my lcd density as touchwiz becomes weird and i do not want to install a 3rd party launcher.
View 9 Replies
View Related
Apr 20, 2013
How to root galaxy s2 i9100 official jelly bean without using odin or computer. I mean direct installation of cwm and superuser through custom recovery. i want soft root only for using titanium backup and other root apps not for installing custom roms. just a soft root without changing the kernel.
View 2 Replies
View Related
Jun 9, 2013
I am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!
View 1 Replies
View Related
May 14, 2014
i have a galaxy s2 gt-i9100 and i wanted to know how to hide Apps and Widgets tab in the app drawer and also make the app drawer fully transparent like the galaxy s5? I decompiled seclauncher2 but i dont know what file to edit
View 2 Replies
View Related
Jun 3, 2011
Code:
private void merge2WavFiles(String wavFile1, String wavFile2, String newWavFilePath) {
try {
File wave1 = new File(wavFile1);
if(!wave1.exists())
throw new Exception(wave1.getPath() + " - File Not Found");
AudioInputStream clip1 = AudioSystem.getAudioInputStream(wave1);
AudioInputStream clip2 = AudioSystem.getAudioInputStream(new File(wavFile2));
[code]...
But today when I try to use it I get a page saying "Source not found".After a little search using Google I found out that Android doesn't support Audio InputStream Class anymore. What are the alternative for this Class? Moreover , I think that it doesn't support the hole package of: javax.sound. sampled. What are the alternatives?
View 4 Replies
View Related
Feb 12, 2014
In some chatting apps, friend A sends a message saying aaa, at the same time friend B sends a message saying bbb.
On notification bar, it displays "2 messages from xxx" but not "message aaa from A" AND "message bbb from B",
That is, the messages are merged together and I can't read each contents of messages in a quick view.....
So, is it possible not to merge messages in android? like iOS?
View 2 Replies
View Related
Mar 12, 2014
My G2 was bootlooped so I switched back to my GNex for a couple weeks since I didn't have any time to repair it. Now that my G2 is back up and running, I want to add all of my new sms/mms that I got back into my G2 without overwriting the old messages.
I also want to add that this applies to group messages as well.
View 6 Replies
View Related
