I'm using micromax A73 and trying to flash recovery mode on it. I have appropriate .img file of clockworkmod with me. I tried to flash it using androidforums.com's sp flash tool method..
But its showing some error on SP flash tool.. (snaps attached). I tried bot a75 drivers and official a73 drivers. But no use. how should i flash this clockworkmod.. Is there any other method to flash?
View 2 Replies
I recently rooted my Motorola Droid and I am trying to run Rom Manager by clockworkmod and when i attempt to Flash Clockworkmod Recovery I get an error saying, "An error occurred while attempting to run privileged commands!" Can someone offer me some help on what to do, I have tried uninstalling and turning the phone off.
View 20 Replies View Relatedwhy do you have to use clockworkmod to flash custom ROMS? If you can flash backups from the stock android kernel, why not ROMS?
View 4 Replies View RelatedHow To Flash Stock Rom Using Clockworkmod on a gt s5360 ???????
View 3 Replies View RelatedI am trying flash the latest recovery mod but it's stuck on 100% don't know what to do
View 6 Replies View RelatedUnrevoked 3 installed Clockworkmod on my phone giving me nandroid backup capability. Now I have downloaded the paid version of Rom Manager. Should i continue to make backups in Clockworkmod or Rom Manager? Can i use Rom Manager to flash Clockworkmod or were they written using different pathways?
View 2 Replies View RelatedMy friend tried using a ROM Manager on his DX and it doesn't seem to be working right. When trying to flash a ROM it reboots, attempts to boot into Recovery, fails, then boots up normally.
When I boot into into his ClockworkMod recovery manually, it doesn't appear to have all the options like it should. For instance, I cannot create a Nandroid backup or flash stuff from the SD card. Is this normal?
From within the ROM Manger I tried to flash a new ClockWorkMod Recovery but that also fails just like flashing a ROM.
I have an Incredible so I don't wanna screw up his DX so how do I flash a new Recovery for him? I can't create a backup of his stuff so I want to be extra careful.
To use more features in the ROM Manager app I decided to flash the Clockwork recovery image from Rom Manager.I got the message the image had flashed so I tried to restart my phone to make sure it flashed and to make a nandroid with the new image.Phone would not boot into recovery for me.So I pulled the battery (phone was stuck on "HTC" screen), waited 10 seconds, replaced battery and tried starting the phone in regular mode instead of recovery.That worked.So I tried restarting in recovery mode again.Failed again. Figured the problem was in the Clockworkmod recovery image. So I pulled/waited/replaced the battery again and restarted the phone in regular mode.Used the USB to get to my SD card and went into the file for the Clockwork recovery image and deleted it.Then I pasted the 1.6.2 RA back onto my SD card and planned to flash it.
But I have not been able to flash the image because all my phone does now id get to the "HTC" screen and stays there.Nothing else to show it is booting up.Finally pulled my SD card and put it in my card reader on my computer.Pasted the Clockworkmod recovery image back into the correct folder, thinking I might be able to at least get the phone to boot up in regular mode. No luck.Just goes to the "HTC" screen I see every start-up and stays there.So the 1.6.2 RA is on the root of my SD but not flashed.The Clockworkmod image is back in it's folder but not re-flashed.
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies View RelatedI need go to the FastBoot menu becouse i need change the splash screen - boot image (bootlogo)
If i push + / - / power buttons, always i will go to the ClockWorkMode.
Huawei sonic U8650
Android 2.3.5
Root
ClockWorkMod
OC Kernel
I done a backup using Clorkwork Mod before I flashed a new ROM onto my phone. Now when i am trying to restore the backup onto the phone using CWM it completes the task but whenever I reboot the phone it gets passed the first samsung screen but hangs at the second SAMSUNG screen where the text is pulsing.
I have tried Wipe / Data factory reset, Wipe Cache, Wipe Dalvick and fix permissions. None of these seem to make any difference. The only thing that has worked in flashing a new ROM but I do not want to lose any of my apps /configs.
I just received a used phone that, when powered on, has Clockworkmod Recovery.
Why would this be on the used phone? Has the OS or phone been tampered with by previous user?
I cannot figure how to get to main phone screen.
I have unfortunately formatted my usb storage which contains cwm.zip and custom rom...now whenever i boot the device there's no sd card avilable...
I tried by inserting exrternal sd card also and connecting phone to PC via usb but in Pc also, I cant find the drive (may be coz of no drivers ???)I want to change the custom rom i have installed because it doesn't show sd card and cant find network so my phone become useless..get back my usb storage so that i can install another custom rom...
I was wondering if you could change the ClockworkMod recovery, and if so, how?
View 9 Replies View RelatedI have purchased a Micromax A85, and looking for CWM for it. Is there a link, or is someone working on developing it?
View 2 Replies View RelatedI'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.
I have a Velocity Cruz t301. I'm not able to root it yet with ClockworkMod. Is there an instruction manual for ClockworkMod somewhere ???
View 5 Replies View Relatedrandomly yesterday my phone shut off and rebooted itself. Well, it became stuck on the Samsung boot screen. So I reset it again, and again, and again. Eventually I went into recovery mode and clicked the wipe data/factory reset button. Actually, at first I clicked the wipe cache button. So I rebooted it, and now everytime it boots it goes straight to recovery mode (Volume Up, Home, Power). So i began looking for solutions and decided it would be best to restore to a stock Rom. Well I downloaded one, and attempted to look for it in the internal SD card but all it said was "unable to mount sd". Did some more research, and found something called odin. I went into download mode and odin was able to recognize my device. Loaded up my stock rom (pda, .md5) and it would say this:
Quote:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
[code].....
Not entirely sure why it stopped at recovery.img. I installed the Samsung Drivers from the website and still nothing. Uninstalled odin and went to an older one, still same message. Installed a newer one, still same message.
My device is stuck in a bootloop with an incorrect rom. I wanted to flash the corrects rom, but when I tried to do so, clockworkmod gave me this:
''No files found''
I already used several SD card, which were NOT empty, but it kept giving me this error.
I recently downloaded and flashed my Qmobile A10 with this ROM URL....
And after flashing it I had a RAVEN ROM first which was getting stuck at boot logo. Even after the flashing I get to see the RAVEN ROM boot logo and then I see the Canvas(The ROM I installed) boot animation. Problem is that I don't get signals. They keep dropping.Further more I don't get to go to recovery again. Everytime I try it just factory resets the mobile.I tried going to Recovery mode by:
1) Holding Vol UP + Vol Down + Power Button > Vol Up
2) Mobile Uncle Tools again
3) ROM Manager
4) Terminal Emulator
5) Some flashbit.bat file I found for my phone
6) SP Flash Tools
All give the same result that my phone is factory reset. Except SP Flash, even after installing drivers it prompts that the drivers may not be installed and a USB error 8100.
Galaxy 3:I5801 with firmware upgraded to 2.2 , was rooted already..I had been trying to upgrade to 2.3.7 with cyanogen 7.2..Clockwork mode recovery was not installed and instead in the normal recovery mode a zip file ,containing the files:META-INF,System and zimage, was renamed as "update.zip"
It did accept the zip and displayed "Welcome to android 2.3.7" but then was stuck displaying "I5801" logo.I am still able to enter the download mode (Vol - | power | home combo) and the "Forced upload by key pressing(vol + | power | home)". I tried usng ODIN to flash , it is flashing and displaying "pass" but no change in the phone .
how can i go for Clockworkmod... in this tab custom rom Onix v0.3 or 0.2..
can you post something about CLOCKWORKMOD HYUNDAI A7HD Onix v0.3 or 0.2...tell me the way of taking my current rom backup before i flash custom rom of Onix v0.3.
So the past few days i have been working on porting clockworkmod to my tablet Vexia Navlet 2 White (cpu telechip tcc892x, board m805_892x_evm), i have setup a build environment and managed to make a bootable CWM but have reached a bit of a wall, my recovery dont mount anything.
And so i have a few doubts:
1 - In boardconfig.mk
I have these lines
Code:
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x00a00000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x00a00000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 0x19000000
BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x39800000
BOARD_FLASH_BLOCK_SIZE := 131072
The size must be set based on the cat /proc/mtd result (or so it says on the different guides i found)
Code:
dev: size erasesize name
mtd0: 00a00000 00200000 "boot"
mtd1: 00600000 00200000 "kpanic"
mtd2: 19000000 00200000 "system"
mtd3: 00400000 00200000 "splash"
mtd4: 09600000 00200000 "cache"
mtd5: 39800000 00200000 "userdata"
mtd6: 00a00000 00200000 "recovery"
mtd7: 00200000 00200000 "misc"
mtd8: 00200000 00200000 "tcc"
After searching on the forums and googling i saw that some people use the hexadecimal value of the column size but other people convert it to decimal, what is the right way? are both okay? is the code from my boardconfig.mk up there ok?
2 -
Code:
BOARD_FLASH_BLOCK_SIZE := 131072
This value, after researching it seems that this must be the decimal converted value of the erase column
Code:
mtd8: 00200000 00200000 "tcc"
In this case 00200000 (hex) -> 2097152 (dec), but if i set this value i get and boot.img too big error, i dont know if this is the reason of the mounting not working, but leaving the default value i can make it and the recovery boot.
install the recovery ClockworkMod suited my LG L5 E612f ....
View 2 Replies View RelatedI have an intenso tab714 with android 4.0.4 and I can't find a guide to install cm and cwm recovery on this tab.Also rom manager can't automatically install the cwm.TAblet is rooted.I downloaded cm9 and cmw recovery .zip but I do not know if they are safe to use on my tab.
View 3 Replies View RelatedI have a chinaphone and I'm trying to install a custom recovery so I can make/restore backups if anything messes up the phone, but it hasn't got an official clockwork mod recovery.
I've read that you can build a custom recovery using the ClockworkMod Builder website with the original recovery img extracted from the device,I tried using this method to extract the recovery: http:[url]....
Then I used an App called Online Nandroid Backup which has successfully created a recovery img for me, I ran it through the ClockworkMod Builder website but it says no changes were made.
I make root at one LG e510, after I put Rom manager and install custom recovery clockworkmod recovery. Everything fine till here, but after try to acces recovery, spears only stock recovery and not custom recovery.
HTC Desire S
I'm looking to install a rom via CWM without using adb. What is the adb commands to do this? I've found a thread about how to do this for Amon_RA's recovery but nothing for CWM.
Amon_RA tutorial: [URL] .....
I am running an HD2 with MccMBoxmaxX Android V9 on SD. I boot into Android with magldr.
Windows Mobile 7 is in NAND.
I have used the cooked in Rom Manager to install ClockworkMod Recovery.
However, when I boot into magldr and try to run "AD Recovery" I get the "No Boot Source" error message.
I have the OG Motorola Droid A855. I installed the 4.1 Jelly Bean mod onto it. I'd like to move my apps to the sd card - however, the "Move to SD Card" option on my phone is grey and unusable.
I'd like to do so with Clockworkmod recovery. However, I cannot do so because my Clockworkmod recovery does Not have the partition SD Card option (it is v2.5.0.1).
How am I supposed to partition my SD Card without this option within Clockworkmod? What is another way to do so?