I have HTC one mini I have tried to update ROM operation was unsuccessful now when I reboot my phone shows 4 exclamation mark in corners and cannot boot without fastboot oem boot command. When I pres power and volume buttons shows same screen so cannot access to hboot for install custom recovery and stock ROM. My phone details:
LOCKED
M4_UL PVT SHIP S-OFF RL
HBOOT-2.21.0000
View 2 Replies
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
Since I installed Virginity v12 on my S3 Mini I can't boot it in Recovery or download ! I have tried with buttons, with reboot menu... even from Clockwork ! It just boots normally on system ! How do I fix it ?
View 3 Replies View RelatedI was a little too enthusiastic about this new device and thought I would get the resolution just right before getting my backup systems in place. Big mistake. When I rebooted, the icons were so small I could not make them out. I finally got back into LCD Density, but was not able to make any changes or revert back. I was just able to make out the android settings menu and navigate to the reset menu. Unfortunately, while the OS was reset the screen density was still not right.
This is the RK3066 dual core android mini pc. I do not know how to boot into recovery. There is no place for a paper clip like on the older mini android pcs. I don't see a tried and true method. I have Android SDK and various root tools on my win 8 desktops.
I have a problem with a Galaxy S2 Mini. The phone doesn't boot, it only shows the first Samsung logo and then the Samsung Galaxy S2 mini text, but after that, the screen turns black and the phone does only vibrate. Is there anyway that I can reset my phone (erase all data??). I also cannot connect the phone on my computer (It doesn't show anything in My Computer on my PC)
View 1 Replies View RelatedI am using sony ericsson x10 mini mobile phone. I want to install custom ROM cyanogen 7 gingerbread. But I am facing problem while booting this in recovery mode. I have tried the following.
downloaded custom rom for xperia mini and copied in to sdcard
installed ROM Manager Premium (not purchased, downloaded from google search and it is working fine)
installed root explorer S1 tool
Rooted from superoneclick
downloaded xRecovery and copied into system folder
Flash tool - showing bootloader unlocked, and dont know how to flash phone.
msm7227 - used for unlock boot loader
I have rooted my phone successfully, all above things did successfully, when i am trying to boot my phone into recovery mode then it is not boot in that mode instead it boots in normal mode. What I am doing when phone starts and sonyericcson appears then i continuously pushing button many times but it boots in normal mode. So what I have to do to boot my phone in recovery mode. I have read and tried many guides in your forum but nothing works.
I've been trying to track down a solution to my problem, but every solution seems to contain a "Boot into recovery mode" line which I cannot do. I attempted to update a rom that I had installed, and now I am stuck at the google logo with the unlock icon. I cannot boot into recovery with the volume keys and power, and now I cannot figure out how to use adb to recover the phone, as it cannot recognize it.
Is there anyway I can access this phone while it is in this state from my computer and recover it somehow. I tried following leads that people have posted in other threads, but it seems like most suggestions involve "Use adb", yet every adb tutorial involves the phone being in recovery mode. I've tried to uninstall and reinstall drivers via Wug's Toolkit, but when I plug my phone in, I am not able to install the drivers properly. I try to run adb items through the console, yet it does not recognize my device.
Is there anyway to install the necessary software I need and recover my phone while I cannot get past the google logo screen?
I am using a verizon galaxy nexus
I have problem with wifi conection. I'm normally connected to wifi but I don't have internet access.
View 2 Replies View RelatedI have a QMobile Noir A2 with custom ROM D-XPERIA HD installed. Android version 2.3.7
I have been facing a problem from quite a while now that I cannot access Facebook or Google through any browser except Opera Mini.
It always gives me an error that could not locate remote server and/or check your network connection.I'm using wifi and Facebook and Google works just fine on my PC on same network. Even the Facebook Android app works properly and all other applications also work perfectly on the Internet. So this is not a problem with my network connection.
Only browsers do not load these pages, I have tried the stock browser, Dolphin, one browser, opera classic previously called opera mobile and other browsers too. A few months ago they were working but now not.I did not try Firefox or Opera Beta Browser because the are too heavy for my phone.
Opera Mini works, obviously because it does all loading and processing in its servers.I think that there maybe a certificate or authentication problem in my phone which is causing this.
I used my galaxy ace (I had the low memory icon) when playstore has updated an application, then suddenly all my applications are set to "force stop" including Holo launcher, so I rebooted, but the I had teh cyanogenmod 7 icon repeat (bootloops) I cann't access to the recovery mode (I had RAMDUMP mode (ARM9 mode)) I can access to the "downloading" mode so I wanted to flash a stock rom (even three in fact) with odin multidownload 4.38 but nothing happens when Odin has restarted my phone, I had the little android image that works then a message like: "E: failed to mount storage (invalid argument)" and the phone started to reboot loop I've tried dozens of manipulations unsuccessfully kies does not see my phone I do not know what to do,
PS: I've tried all the manipulations removing the battery / SIM card and sd waited 5 minutes, I was able to put the phone in Emergency Mode DLOAD but it nothing happens the only real thing that still works is the "Downloading "mode , but I think my recovery mode was crushed and I cann't access it even when I can flash with odin I always have the problem of "E: failed to mount storage" (the same style as him [URL]...
I cannot access the recovery mode of Ainol Novo 8 Advanced MINI Tablet. I tried holding power + vol+ button but its not working,
View 2 Replies View RelatedJust upgraded my wifes X10 mini (unbranded UK version) using the SE PC Compaion. Followed all instructions etc, but its now stuck in a boot loop, restarting just after the full screen coloured animation "spins" into the SE logo and text.
View 3 Replies View RelatedOn occasion I am unable to load Facebook on my X10 mini pro. I receive the message An error occured while fetching data. [null] I can send/receive texts and email so this is not a signal issue. Point to note, I purchased an unblocked vodaphone pay as you go for my pay monthly tmobile sim.
View 5 Replies View RelatedI'm having a problem with the internet. Recently I updated new software on my phone Xperia X10 mini, (2.1) and since then I can't access the Internet trough Web! I could access it on 1.6 software (there would be those 2 arrows one on up on on down) and now I can't get that connection again. And one more question, how come that I'm not visible on Bluetooth at all and I can't send any data over bluetooth, or at least receive.
View 2 Replies View RelatedI got an X10 mini pro. It feels great. I tried Internet access but I don't know how I get that without using my telephony operator (and being charged for every byte transferred).
I have internet connection home on my computer. I thought connecting my X10 mini pro to my computer through USB would be enough to have free internet and download from Android Market among other things. However, it doesn't work like that. I tried to activate "Airplane mode" so as to cut off al wireless connections and use USB "forcing" my X10 mini pro to look for th internet that way but it does not have internet access through USB connection with my computer (Internet works great on my computer).
I did not manage to access directly Google calendar from my phone. I had to go through the browser to see. Isn't there an app for that?
View 2 Replies View RelatedI cannot access the hotmail website through my browser, does anyone know why this is? it goes to the login page, but this is just blank, so I cannot sign in?
View 3 Replies View RelatedHow do I access / open the sd card from my phone
View 1 Replies View RelatedAfter updating my phone to android 2.1, I'm unable to access my Gmail and other apps thru. WiFi. I have the WiFi symbol at the top which clearly shows that the WiFi is connected, but when I try to access Gmail, android market and other apps., it gives me message stating "no network connection".
View 3 Replies View RelatedI have a Nexus one and I have made a bit of a mess of it when loading a custom rom. Previously I'd rooted (without unlocking) the stock (2.2) rom before loading Cyanogen 6, later Cyanogen nightlies and finally eViL-NXSense-v1213. I was rather enjoying the last one but had severe stability issues which I think was due to using Titanium Backup and restoring data. I was in the process of re-imaging to eViL-NXSense-v1213 after clearing the SD card, data and various caches when something seemed to happen to the recovery image. I can get into the boot loader but if I select Recovery it shows the Nexus One logo indefinitely and doesn't respond to the power button being pressed, the same happens if I turn it on from cold.
Is it possible that the recovery image has somehow been corrupted? If so what can I do to restore a recovery image that will enable me to install a custom rom. I would prefer not to unlock the boot loader but will do it if necessary.
I'm using Android Version 2.3.6 ... Last Few days Ive been searching for a method to add a Handler Menu in Uc Mini like one in opera mini! you can see a screen shot of the handler menu in Opera mini which Ive attached!
View 3 Replies View RelatedI am trying to access my mailaccount from my new X10 but no success. Need to check the ports, but I can't find where to check them.
View 1 Replies View RelatedI am trying to do some low level performance testing related to device processor cores through adb which I feel it is affected by Android background services and system stuff.
As I know that the Android boot sequence stages are as follow:
1.Execute Boot ROM code.
2.Execute the boot loader.
3.Load the Linux kernel.
4.Launch Zygote, which initializes the Dalvik VM.
5.System server which loads the Android system.
So my question is how can I interrupt this sequence to force it stop on stage 3 to load Linux kernel. This can implement my intermediary performance testings before loading again Android system.
Does Fastboot or Clockworkmod recovery can load my device to a kind of Linux kernel?
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies View Related huawei u8860:
i compiled a kernel from the sources kernel-3.0.8-U8860-IcecreamSandwich.tar.gz .
on virtual box ubuntu 10.04 (oracle java 1.6.0u33 )with
Code:
gcc -v
x86_64-linux-gnu
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1)[code]......
Phone: UK Galaxy S Issue: Recovery boot error message in red writing
Multicsc : can not access to / system/csc/VOD/system/
Background: I have been trying to root my phone from information found in a youtube video. All went well and the little ninja bloke with the sniper rifle was in the app list. Tried installing busybox and was told that the phone was not rooted�..
I think I ran the root application again and at some point I started getting this error message when in recovery. I have since run the one click root method to unroot the phone and the little nija dude is no longer there. Since I rooted the phone it will no longer connect to my wireless network, it finds the network and attempts to obtain an ip address. After a few min it times out and tries again. When I load the phone recovery the error message is still present.
Please is it possible for me to browse the internet on my pc using my sonyericsson xperia x10 mini pro. Dont know how cause the phone doesnt support Pc suite, only Pc companion, and hence I dont know how else to do it.
View 2 Replies View RelatedYahoo mail account work on x10 mini pro? I cant get it to work, it says theres username pswd prob but it is 100% correct?...
View 2 Replies View RelatedI am not able to copy the photos from mobile to my computer.I have tried reinstalling the PC Companion suite and also have updated to mobile to Android version 2.0.The folder where the photos reside in the mobile is not coming up in the Phone Card Memory,Can any one helpe to sort out this issue? Or Is there ant seetings option which I am overlooking?
View 2 Replies View RelatedI have just purchased an X10 mini pro, however there is no applications bar in the bottom of the screen. The following instructions therefore do not make sense:You can personalise the home screen by adding application shortcuts: 1) from the home screen, tap the applications bar2) press menu bar and tap add3) in the Add to home screen menu, select the item you want to add How do I add app shortcuts to the desktop? Where is the applications bar? I also cant find mediascape, where is this?
View 1 Replies View Related