General :: HTC Split Second Red Flash
May 11, 2012
I've had to send my phone back twice in the past month, initial issue was a weak vibrate motor and a difficult to press power button. Phone came back with a replaced mainboard but had to send the phone back right away as it wouldn't go into landscape mode (I determined it was a defective accelerometer). If I have to send it back a third time, I'm going to be absolutely livid.
I noticed (for the first time yesterday), that if the phone has <15% battery left and I use the pull down menu, the red LED with give a very quick flash that is not like the standard red LED flash when the battery is low. It will do this if you push on the top bar to activate the drop down menu and also if you completely swipe to bring the drop down menu down. However, doing any other actions such as pressing the captive buttons or scrolling will not cause the LED to flash briefly.
View 2 Replies
Jan 31, 2012
I would like to use my tablet to replace the navigation interface in my car.It would be nice if I can split the screen 3/4 to 1/4. for the navigation and Pandora.
View 2 Replies
View Related
Jul 8, 2013
I installed a Rom for my Thunderbird i5 LTE yesterday from now, the rom works fine because its is meant to be for my device, i noticed i cant slide to unlock because my bottom half of the screen has inverted the y coordinates as the app MobileUncle Tools tells me that and so i can see as i try to use it
Where i can get the Stock ROM for this Device? (White Version?)
View 5 Replies
View Related
Mar 30, 2013
Yesterday Instant upload album on my N4 got split into 100+ new albums and now all the photos taken on the same day are in a separate album with the date as the album name. This makes viewing photos on the phone useless since I now need to go through 100+ albums to find a photo.
On the G+ photo page everything looks good (ie no 100+ albums) but once I go to PicasaWeb the same problem is there as on my phone (Instant upload album got split up into 100+ albums)
View 1 Replies
View Related
Jan 29, 2012
Topic moved to App to join/unsplit/merge/combine SMSes/texts
View 2 Replies
View Related
Dec 13, 2012
how to split the status bar and the soft keys on a crappy rebranded tablet? It runs 4.1 but the notifications, volume buttons and soft keys overlap each other making it look an eye sore. I have taken a look in the framework-res.apk and systemui.apk but can not find anything. What I want to do is split the two a bit like the nexus 7, so that the status bar is at the top and the soft buttons are at the bottom.
View 1 Replies
View Related
Nov 23, 2012
I read about this in fxp 148 cyanogenmod 10 changelog and would like to know what doesn't this exactly mean. I cannot post a link for the entire changelog.
View 1 Replies
View Related
Feb 6, 2013
I have a generic Allwinner A13 7" tablet essentially identical to this one. The internal memory is set so that part of it is seen as internal, and part as a fake SD card mounted on /mnt/sdcard. Actual SD cards get mounted to /mnt/extsd.
I find this very annoying for a number of reasons, and would like all the internal memory to be seen as internal with no fake SD cards, and SD cards to be mounted to /mnt/sdcard. If this were one of those tablets capable of running Linux I'd run gparted and do the job from there, but it isn't.
Is there any way to merge the two internal memory partitions into just one?
I'm aware I can edit vold.fstab and invert the two mount points, and I'll keep it as a fallback solution, but I hate the idea of wasting a gig of useful internal space like that.
View 2 Replies
View Related
Nov 15, 2012
I need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?
View 8 Replies
View Related
Nov 27, 2010
I tried to do a search but it's a needle in a haystack. Sometimes I'll get a text containing a link but it gets split up into a second text rendering the link broken. Is this an Android issues or a Messaging app issue?
View 3 Replies
View Related
Jan 5, 2010
Hey guys I remember on my iPhone I used to be able to split up video while sending a text with video attached to a friend. It would say video is too long and let you choose a portion that would be able to send. Is there an app or maybe I'm missing something because I am using Handscent for texting.
View 3 Replies
View Related
Sep 3, 2010
i'm brand new to this forum (and to android in general)! i just got an HTC Desire through Telus and i absolutely adore it.however i have a very annoying problem.whenever i receive a long text message from a friend (over 130ish characters), the message is broken apart into separate text messages and the messages are not in the order in which they were sent. since i get A LOT of long messages from friends, this is a huge pain in the butt.i don't mind the long message being broken down into smaller messages, my problem is that the small messages arrive in RANDOM order.
View 4 Replies
View Related
Sep 3, 2010
I have a file path to the SD card on a String.. like this : /sdcard/ download/recentPic.jpg.And I'd like to get just the filename and extension recentPic.jpg.Is there any simple way to do this?
View 15 Replies
View Related
Jul 29, 2010
I'm wondering how can I split single line text into few lines. I need it for game. I want to make it in canvas. It will be notification popup, but sometimes text is too long (I draw text canvas.drawText()), and I need to split it and draw in few lines in rows. Anyone knows a good solution? I saw methods mPaint.measureText() or TextUtils . split () , but it isn't so good in my case. Is there other method?
View 5 Replies
View Related
Jul 28, 2010
I am a former iPhone user and when I had it my texts could be as long as they wanted too. When my girlfriend sends a long text to my EVO I get multiple texts and it is annoying. Is there a way to change this? Tried a search and no luck.
View 14 Replies
View Related
Sep 23, 2010
After the update and with the leak I had only does this on hd it will freeze for a split second once or twice during playback anyone else try this?
View 3 Replies
View Related
Sep 17, 2010
I have a string called CurrentString and is in the form of something like this "Fruit: they taste good". I would like to split up the CurrentString using the : as the delimiter. So that way the word "Fruit" will be split into its own string and "they taste good" will be another string.and then I would simply like to use SetText and 2 different textviews to display that string. What would be the best way to approach this?
View 1 Replies
View Related
Sep 24, 2009
I tried to create byte array blocks from file whil the process was still using the file for writing. Actually I am storing video into file and I would like to create chunks from the same file while recording. The following method was supposed to read blocks of bytes from file:
private byte[] getBytesFromFile(File file) throws IOException{
InputStream is = new FileInputStream(file);
long length = file.length(); int numRead = 0;
byte[] bytes = new byte[(int)length - mReadOffset];
numRead = is.read(bytes, mReadOffset, bytes.length - mReadOffset);
if(numRead != (bytes.length - mReadOffset)){
throw new IOException("Could not completely read file " + file.getName());
} mReadOffset += numRead; is.close(); return bytes;
}
But the problem is that all array elements are set to 0 and I guess it is because the writing process locks the file. Any other way to create file chunks while writing into file.
View 2 Replies
View Related
Aug 6, 2010
Wanna to split a screen for my app with two LinearLayouts. What parameters should I use to make exact splitting in two equal parts - first LinearLayout on the top and the second one is just under it.
View 2 Replies
View Related
Dec 27, 2009
I really dislike the original messaging app. I want an app that has reminders, a custom vibrate, and an sms split, that ISN'T hancent sms. I used to use it until it randomly started deleting my all of my threads and sending texts to completely different people. I tried chompsms but I couldn't find reminders and I I'm currently using sms popup but that doesn't have the auto split sms. Any recommendations??
View 15 Replies
View Related
Nov 10, 2009
I just noticed my alert icon, downloading them now I wonder if GV will split voice and text now? WB just says bugfixes and 2.0 support.
View 6 Replies
View Related
Mar 11, 2010
I have a free app out there and am going to write a pro version with some extra functionality that I'll charge for.
The plan is to use the same code for both apps, although I need different Eclipse projects to use different manfiest files. The obvious way is to have all my code in a shared library which the free and pro projects reference.
View 3 Replies
View Related
Sep 25, 2010
Does somebody knows how to make similar listview?
How to split row?
Image: link text
View 1 Replies
View Related
Jul 23, 2010
When I go into my gallery for pictures I have roughly 200 pictures, its annoying to find the one I want, is it possible to split them into separate folders (e.g. "Personal", "Wallpapers", "Icons")? I don't mind downloading an app or two to achieve this, I just don't like all my photos being thrown together.
View 6 Replies
View Related
Oct 19, 2010
I'm trying to put 2 listviews into my layout. The problem is that I don't know the size of each listview in advance. The first listview could have a few items (0, 1, 2 up to roughly 10) and the second listview could have many items (up to 100).
I tried to set the weight of both listviews at 1 but it did not work:
=> If the first listview has only 1 item and the second one 99, you don't see the first item of listview #1 => it's shrinks so much (relative to listview #2) that you don't see it.
So I'm thinking now to split the screen in 2 equals parts (no matter what/no matter the size of each listview) and put the two listviews in each part. Of course it needs to work on any device ... so how do I capture the device screen size, divide it in two and force the listview size to fit in each half of the screen ?
Has anyone done that already ? Is there another option to show two listviews of different sizes on the same layout (should I use a scrollview in some way ? => when the user is reaching the end of the first listview, the second listview appears => is that possible ?)
View 2 Replies
View Related
Mar 19, 2010
I want to create a search box with the search button directly on the right of the EditText, without any spacing. Looks like the address bar on the internal Browser application. Is it possible or do I need to create it myself?
View 2 Replies
View Related
Nov 26, 2010
So, I would like to assign separate ringtones for my gmail and sms alerts. Apparently, the Android system groups these together; I can assign a different tone for regular email, but not gmail, as the Android system groups them under "notifications." Is there an app out there for this?
View 9 Replies
View Related
Oct 19, 2010
I'm requesting data from my server and receive a string in the form of 2|bit.ly|1||1| and | should be the separator. I thought the following piece of code should do the work
BufferedReader br = null; ...
br = new BufferedReader(new InputStreamReader(inputStream)); ...
String line; String[] columns; ContentValues values;
while((line = br.readLine())!=null) { columns = line.split("|"); ...
}
But after the line.split("|"); the columns contains 15 elements instead of expected 6. Taking a closer look at it's content reveals that each character in the string was stored in one array element. The code coming from server isn't encoded in any way in in the example I use only ASCII characters appear.
View 1 Replies
View Related
Mar 2, 2010
I'm writing an Android application. One problem is your app cannot contain a file whose uncompressed size is bigger than about 1Mb. I have a serialized object that I want to load that totals about 2Mb. My plan was to split this file into two smaller files, then load the object by combining both files at runtime.
However, I cannot work out how to use e.g. InputStream and ObjectInputStream to specify that I want to read the data from two input streams. How can I do this?
For example, say my object was split between file O1 and O2. How can I say "Load the object by reading the data from O1 then from O2"?
View 2 Replies
View Related
Jul 3, 2010
I'd like to make a list adapter that formats views like this:
I want to be able to fire a different onClick when the user clicks the image. I have defined the onClick on the image itself in the getView() override, but how do I then get the position of the line that was clicked so I can update the record in the database to record the action?
View 1 Replies
View Related
