Android :: Access In Native Libraries?
Apr 12, 2010
I am completely new to the NDK.
I have done a couple of the tutorials including the hello from jni one and another one that calculates the sum of two numbers.
They involved using cygwin and the ndk to create the library so file and I have a bit of a grasp on how to insert my own libraries into the libraries layer of Android.
I have now been asked to access the native libraries on Android and see what I can use them for.
My question is can I do this?
The STABLE-APIS.txt document is a bit vague and mentions the following as Stable C++ API's in Android 1.5
cstddef
new
utility
stl_pair.h
Does that mean I can access them?
If so then how do I go about it?
View 1 Replies
Jul 1, 2010
Is there any way to access the contact DB in my native libraries(C/C+ +)? Also to update the contact database through native libraries itself.
View 4 Replies
View Related
Apr 1, 2009
Is it possible to use a native C/C++ library? If so, are there any restrictions for those libraries to be used?
View 3 Replies
View Related
Oct 9, 2009
My application cannot handle the JNIE overhead, as I need to make 2 JNIE calls to the native C/C++ code for every 20msec. So I am trying to use the native media libraries and the realted C/C++ files provided by Android in the folder "//external/srec/audio/test" of the donut build. Ex. AudioHardwareRecord, AudioInRecord etc.. I am implementing all the calls in the native layer.
I am using the sampling rate as 8000 and want to read 160 samples (320 bytes) at a time.
I used the following values to create the AudioRecord..
CODE:..........
It says "success" after creating this interface but I am getting the error "Bad Value" if I am doing the InitCheck.
And it is crashing once I start reading the samples or if I try to retrieve the configured sampling rate.
Has anybody tried to access this native code?
View 4 Replies
View Related
Nov 9, 2010
For some reason ever so often I get that message on the bottom of my screen. Its not worded exactly, but its kinda annoying. Does anyone know what it mean and how I can make sure it doesnt show up again.
View 3 Replies
View Related
Nov 17, 2010
I am an Android app developer, and I have purchased a Nexus One device which I use to continuously test my developed Android applications.
Background: ----------------- One of the applications I developed uses a native shared library (e.g. myNativeLib.so). Only my application loads & uses this native library. I had developed this app before Android NDK came out. I pack my native library into my apk's 'assets' folder, and during my application start- up, I extract this native library from my package's assets folder to my app private directory (i.e. <assets> -> /data/data/<myappprocess>/ myNativeLib.so). Then I use System.load() API in my application to dynamically load this native library.
Problem: ------------ This application was developed during Android 1.5 (i.e. cupcake) days {I didn't have the Nexus One then}. The above procedure has been working without any problems right from Android 1.5 to Android 2.2 (i.e. Froyo). I have also tested the same on my Nexus One for Android 2.1 (i.e. Eclair) and Android 2.2.
The problem began the moment I recently upgraded my Nexus One to Android 2.2.1 via the FRG83 system update. Now, whenever I try to load my native library, I get the following error:
D/dalvikvm( 3653): Trying to load lib /data/data/<myappprocess>/ <mynativelib>.so <some address> I/dalvikvm( 3653): Unable to dlopen(/data/data/<myappprocess>/ <mynativelib>.so): Cannot load library: link_image[1995]: failed to link <mynativelib>.so
What I have Tried: -------------------------- 1. I tried my application using Android 2.2 SDK (emulator)...it works, no issues. 2. I checked out the latest froyo & android2.2.1 source code from Android open-source, built & tested my application + native lib using the latest froyo source...it built & ran, no issues. This should've taken care of any changes in the native code dependencies between Android 2.2 & Android 2.2.1 3. I even checked Android 2.2.1 source code for dalvik (java System & Runtime classes) + bionic (linker & dlopen sources) between Android 2.2 & Android 2.2.1 (using source checked out from Android open-source), but couldn't find anything consequential 4. I am unable to return my Nexus One to Android 2.2.
View 3 Replies
View Related
May 1, 2010
Looking for any pointer or advise using NDK to access to native bluetooth lib. is it doable? anyone have good or bad experience to share?
View 2 Replies
View Related
Sep 16, 2010
I am trying out an example of OpenCV from http://github.com/billmccord/OpenCV-Android and am stuck at the point where it is mentioned "Before attempting to run the VideoEmulator application, you must first copy this XML file into the emulator in the following location: /data/data/org.siprop.opencv/files/haarcascade_frontalface_alt.xml " Where in my eclipse workspace do I need to place this haar xml file to be copied to the location /data/data/org.siprop.opencv/files/ of the emulator?
View 1 Replies
View Related
Jul 11, 2009
Could someone please tell me how to access android's native resources? In particular, I would like to use the camera icon and shutter sound in my own app.
View 3 Replies
View Related
Aug 9, 2010
Try to select (or update) from custom databases (for example mmssms.db) but on init I see " Unable to open the database file". Try send permissions in manifest <uses-permission android:name="android.permission.WRITE_SMS"/> <uses-permission android:name="android.permission.READ_SMS"/> but this doesn't help.
View 2 Replies
View Related
Jul 29, 2010
Is it possible, from within my android java app, to capture an image of what is on the screen, even if it was written using native (ndk)? I do not wish to take screen shots of other apps, just my own. I can already capture and image of a canvas that I am aware of, but is there a view or canvas or something like it that always represents what is on the screen, so that a) I don't have to capture the separate views images and recompile them, and b) I can see what my native (jni) code is doing with the graphics too?
View 1 Replies
View Related
Oct 5, 2010
I am working on video renderer application which need surface and control of surface. And through isurface i can register heap buffer to that surface and post buffer operation. I have gone through android_view_surface.cpp file. It is having all required APIs which are helpful for my application. But i don't know how can i implement it. What are the procedures to get access of those APIs.
View 2 Replies
View Related
Sep 10, 2010
I was really excited today when I saw the Tools r7 and ADT 0.9.8 were available and the latter had this note;
Fixes problems with handling of library project names that contain characters that are incompatible with the Eclipse path variable. Now properly sets up the link between the main project and the library project.
I create the library (foolib - no spaces, no caps, no punctuation). So far so good. I go to the main project, go to preferences --> Android. In the library box I add the new library. It appears. I press Apply. I press OK.
Nothing happens.
I return to the preferences, the library is no longer there JUST LIKE BEFORE.
View 2 Replies
View Related
Jul 13, 2010
I looked around for info on this in the group but couldn't find any... so far in my OpenGL programming I've just done everything directly, but I was curious if anyone had written any "wrapper" libraries for it besides min3d. Min3d is great (or is getting there) but it's GPL'd, making it unsuitable for a commercial product (if my understanding of the license is correct).
View 5 Replies
View Related
Oct 15, 2009
We have been using gdbserver to debug our JNI code as follows. We have been less than successful -- breakpoints do not always get activated, sometimes we get SIGILL, and we seldom ever get a useful stack when the debugging stops on SIGSEGV, sometimes the program dies with SIGTRAP!!!
We have occasionally been able to have debug sessions with s/n, but since pretty much every SEGV has resulted in either a damaged stack, or at least, gdbserver can not find the stack, it's a pain.
Is there something we are missing? Is there some reason to use the 4.2.1 vs 4.3.1 toolchain? (Why are there two toolchains? I assume because of bugs in each that are fixed in the other... which bugs?)
We guessed that the "dalvik" process that we wanted to debug was app_process --- we found this out by looking at /proc/XXX/cmdline on our running activity.
This is what we do typically do(repo sync directory is in /build/m1 for me)
invoke:/build/m1/prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi- gdb
(some of us use -tui, some of us run it under Xemacs, etc.)
We then do:
CODE:..........
We then start our activity, adb shell, discover the PID of the activity, discover the IP of the phone with "netcfg", and:
app_15 1815 49 107468 15744 ffffffff afe0d4a4 S org.credil.thomas_watson.videophoneservice
# gdbserver 0.0.0.0:1234 --attach 1815 Attached; pid = 1815 Listening on port 1234 Remote debugging from host 132.213.238.4
(gdb) target remote 132.213.236.179:1234
This is with a physical device. With an emulator, one has to, of course, run the adb forward stuff. (Too bad that doesn't work with a real device too, as then I would not need to run gdb over the wireless)
Program terminated with signal SIGKILL, Killed. The program no longer exists. (gdb) target remote 132.213.236.179:1234 Remote debugging using 132.213.236.179:1234 Error while mapping shared library sections: /system/bin/linker: No such file or directory. warning: .dynamic section for "/build/m2/out/target/product/generic/ symbols/system/lib/libc.so" is not at the expected address (wrong library or version mismatch?) ... many more GDB will be unable to debug shared library initializers and track explicitly loaded dynamic code. tkill () at bionic/libc/arch-arm/bionic/tkill.S:52
(gdb) break sendframe Breakpoint 1 at 0x80401086: file /build/m1/packages/apps/ VideoPhoneService/libvideophoneservice/src/rooster.cpp, line 96.
(gdb) c Continuing.
Program terminated with signal SIGTRAP, Trace/breakpoint trap. The program no longer exists. (gdb)
(btw, an annoyance about googlegroups is that it seems that it looks at my SMTP from header, rather than From:... This basically means that I can not post from gmane.org via NNTP, which is a shame. Is there a secret NNTP access on googlegroups.com, I wonder?)
View 7 Replies
View Related
Jun 17, 2009
I need to know the footPrint of Android and its various Libraries
- Hide quoted text -
View 2 Replies
View Related
Oct 14, 2012
I'm currently making a purely math and algorithm-based C++ library. Will I be able to use it when developing for Android? How? I guess writing some Java wrappers, but will it then be usable on all JVMs?
View 3 Replies
View Related
Oct 14, 2010
I need to add few shared libraries to the andriod as part my application installation. Can you please suggest right information resources regarding the same.
View 2 Replies
View Related
Sep 30, 2010
Is it possible to use third-party libraries for display pdf?I mean to use custom pdf view, in which I can pass pdf url and view it in new Activity.I want include libs into project and use their as resources.
View 9 Replies
View Related
Dec 26, 2009
I have to add java libraries javax.xml to the my android project, while I am trying to add them it shows the error "Conversion to Dalvik format failed with error ".
View 7 Replies
View Related
Oct 2, 2009
I'm building an app where I want to architect the app layer separately from the service layer (not android services). So I'll create a service interface(the apis) and then create a class(es) that implement that service interface. Inside the android application layer, I want to code to just that service interface. I think this is similar to how the google maps apis works. the api interface and stubs are in the framework, then each device actually provides the implementation. I don't need to go that far, but I am wondering how I package this up. One, where would I put these interfaces, so I can code to them in the app layer (like Activities). Second, how do I tell Android where the implementing classes are? I'm guessing this is somewhere in the manifest? For now I think I would probably just build the service implementation with the application source code, if that's easier. Eventually I'd like to break that out and drop it in as a 3rd-party jar.
View 4 Replies
View Related
Sep 4, 2009
With the NDK I can wrap a native library so I can call the methods from Java and package that library into my application.
Say I want to package a custom version of SQLite, is there any way to override the system library for SQLite, so I dont have to reimplement the SQLiteDatabase class?
View 4 Replies
View Related
Apr 17, 2010
I'm working on a project with a group that is using Eclipse, but I'm using Netbeans. Up until today this wasn't an issue. When updating from the repo they have added some source code as a library under a directory called /lib-src. When I try to compile the code I get an error that it can't find certain packages... these are the packages under /lib-src.
Using NetBeans I can add the library as a folder so now the references to those packages are happy. However, I'm getting this new error when compiling:
UNEXPECTED TOP-LEVEL ERROR:
CODE:.........
I can include the build-impl.xml file if you need it, but I don't think that is main issue.
View 2 Replies
View Related
Sep 28, 2010
I need to import a couple of jars that where compiled under the full implementation of java. I know that Android doesn't use all the packages that java has to offer. My question is: Is it possible to import them without creating errors? Is there a tool that can convert jars to android jars? if so, can some examples be provided.
View 1 Replies
View Related
Sep 16, 2010
Is it possible to install a java library in a folder and have this code dynamically linked into another program? In other words, i have a major code base that would be shared among different projects.Assume that all them are created with the same shared user id.
View 4 Replies
View Related
Oct 14, 2010
Is there a way we can parse apple plist xml using any libraries or otherwise.
View 4 Replies
View Related
Nov 24, 2009
I'm attempting to port a normal Java program over to Android, however I am having a problem with a huge number of missing Java packages (e.g., Android Java does not have java.lang.management). Is there a way for me to work around this, such as by adding the Java modules that I need?
View 2 Replies
View Related
Oct 11, 2010
I am into healthcare imaging. Wanted to know if there are any DICOM Libraries for Andriod.
View 2 Replies
View Related
Jun 21, 2010
I have a few already written C libraries which i want to embed into the library layer of the android architecture at the same level as the already existing libraries such as libc etc.... i dont want to insert it as .jar packages at the application or framework layer. is that possible.
View 2 Replies
View Related
Jul 13, 2010
My app uses location services, and has the manifest entry:
<uses-library android:name="com.google.android.maps" />
Does anyone know if these libraries are guaranteed to be included on every Android phone? If not, how would I know if they are not there?
View 8 Replies
View Related
