Android :: Toast To Be Displayed At Specific Points On The Screen?
Jul 15, 2009I want my Toast to be displayed at specific points on the screen. How do i do that?
View 3 RepliesI want my Toast to be displayed at specific points on the screen. How do i do that?
View 3 RepliesI have a service class written which gives notification(Toast dialog) on every life cycle method call back. when i run my application all works well. but when run this service class from my test project the toast message are not displayed.
It give the following log for the toast message
CODE:.............
I want that the toast message should also be displayed on subsequent calls to life cycle methods
Is there a way (an app, framework module, flashable zip, whatever) to disable toast notifications? Ideally, this should work for a specific app but if that's not possible disabling them in total would be fine, too.
"Why would you do that", you may ask. Well, the thing is, I use the app "Best Wifi" to switch my wifi automatically at home since I'm using a repeater there. But as soon as I'm in an area without wifi connection, it tries to connect to a wifi and keeps on sending toast notifications with "no APN found blabla" every 15 seconds. Thats especially disturbing when I use my phone as a navigation device in the car. So, it would be great if I could block those toast notifications from popping up.
Currently, I'm using a rooted Nexus 5 with Beanstalk ROM on 4.4.2.
When using setDuration for a Toast is it possible to set a custom length or at least something longer than Toast.LENGTH_LONG?
View 4 Replies View RelatedI have looked all over, and done a few searches already, but that don't mean I'm not blind.
How do you/Can you calibrate the screen touch points on the DX? I seem to have to aim slightly lower left of every thing I want to hit. Sadly it seems to be getting worse or well, I'm blinder than I thought.
I have a splash screen/loading screen that has .setVisibility() to GONE right after the draw call of my large bitmap is completed. The problem is the splash screen takes a bit to popup which i believe is due to the main activity booting up and doing CPU intensive applications on first run. Is there a way to get my splash screen displayed ASAP? Would it be ok if i had it in a different thread maybe? The splash screen is just a bitmap with a progressBar right below it. My layout is xml based so i cant see myself using setContentView.
View 2 Replies View RelatedIs it possible to get listed the apps or activity which are actually displayed on the screen of the android mobile. I need to display a text box on some event when no acitivity is displayed, excepting the home screen.
View 3 Replies View RelatedWill i get charged for having the weather displayed on the main screen?
View 9 Replies View RelatedUsing Google Maps on Android does anyone have any ideas on how to load only markers that would be displayed on the current screen? I'm thinking about sending a request to a web service that returns the lat/lng for the relevant markers. But what would the parameters be that I could use to calculate if a given lat/lng is within the screen?
View 1 Replies View RelatedI have written the code for geocoding..but unfortunately it does not work ie nothing is displayed on screen...i am attaching the code...is the fault in the code..
CODE:.............
We are developing an application that requires a download of a music file (mp3). We are using the Browser Activity for the same.
The Browser Activity is invoked from the application and the download url is passed to it, like: startActivity(new Intent(Intent.ACTION_VIEW, Uri.parse(downloadurl)));
However, after downloading, on the download list page, if we press the Back button, a blank white screen is displayed. Only after we press the Back button a second time on this white screen, the application screen is displayed. This happens because the Browser Activity view is displayed before the actual downloading starts.
This is an issue in the application flow. We need to manage the flow in such a way that the 'Back' key press on the download list view will take the control to the application screen instead of the white screen.
Today I am looking for a way to mimic the behavior I know from my HTC Hero's lock screen: the calendar and alarm clock can put text & drawables there to inform about an upcoming event or an expired alarm. The lock screen remains there in that it must be dragged down to dismiss the shown event and there might also be a Snooze button.
But, first question: is this default Android stuff or HTC Sense specific only??
Second question: If it is a common Android thing, why can't I find anything in Google's Android documentation for the topics "lockscreen" or "lock screen" that comes close to my question? Where's the API for it?
My problem is: I want to inform the user immediately - even if I try a standard notification, the user with a locked screen will have to unlock it and drag down the notifications list to see & clear what's going on. sigh Putting an endlessly playing notification sound there is a hassle as it takes at least two swipes down to stop the sound playing!
I was wondering if anyone understood how to make your application be displayed when you unlock the screen. I have an application where the user turns on a Bluetooth device, it connects to the phone, and the user should be presented with a UI. Having them hunt for the app or using the notification menu is not a workable option (too much work and not the obvious behavior).
The problem is that:
When the screen is unlocked:
- you can popup the activity from the background service when Bluetooth connects to a device
- User is happy because the UI is right there
When the screen is locked:
- The application gets started but is destroyed
- User unlocks the phone and nothing is there but the homescreen
One work around would be to disable the keyguard when the application gets woken up but the nuclear option is a pretty bad option. I know the standard Android assumption is that you shouldn't do this. In the normal case this behavior is fine, but in this case I explicitly did something I want the phone to respond without adding more work for the user to do. As per Google's guidelines if you don't like this behavior there can be an option for you to turn this off or you can not use the application.
A few more details, so after looking at this a bit more the problem isn't necessarily that you can't have an activity running when the screen is locked, unlock and expect it to be waiting. That does work if you do something like the following: lock your device run an app through Eclipse while the phone is locked/off unlock and it will be waiting for you.
But in the case the Activity is already running and I'm brining up a new window (which happens to be a transparent one, saying you're connected and asking what they want to do).
The problem is that it gets killed
CODE:..................
The setup here is as follows:
MyBackgroundService is a serivce that handles Bluetooth state (waits for connections, turns on Bluetooth if the user starts the app, etc.). It triggers a popup BackgroundPOPUP activity that runs a ViewFlipper.
MyBackgroundService starts BackgroundPOPUP through an intent.
BackgroundPOPUP is an activity with a Translucent theme (Theme.Translucent to be precise), it shows a ViewFlipper with some instructions and presents some options.
As known, when using the setContentView() method, a view can be displayed on screen.
My question is whether there is a way to receive an event when the view is actually displayed on screen (since it takes some time for the view actually being displayed after the setContentView() method has been called).
Step 1: I am subclassing WebView and rendering html content properly. The intial content is very small with a div and image /link This is displayed in a LInear Layout along with a TextView and ListView. That is my first screen/activity of the application.
Step 2: When I click on a link on this webview, it goes through the webViewclient and expands to full screen to fit the content of the requested page.
After Step 2, I am not able to go back to my activity screen once the content is displayed. When I click on the back button to getback to my activity screen close my activity and goes to the phone's applications desktop. (i.e goes out of my application).
Step 3: In order to fix this issue, I stopped setting my own subclasssed WebViewClient. After doing this, the it seems to render the clicked page in a webView as subactivity. Now When I click on backbutton, it goes back to the activity screen. But, the issue now is, I am not catch event when a link is clicked. How can I catch click events in this case.
I want to open the virtual keypad without touching a text view . Can someone help me how to open a soft keyboard and associate it with a textview already displayed on the screen?
View 2 Replies View RelatedMy screen keeps coming on while the phone is locked then it will go off and come back on like 2-5 sec later just an endless cycle. This is a factory 2.2 droid x with 2.2. Have launcher pro and some stuff on it did a virus scan with AVG said it was clean what gives here?
View 9 Replies View RelatedOn my home screen where the weather is suppose to display all it says is Location. How can I fix this, or link me to an article that does?
View 4 Replies View RelatedNot sure of this has been asked but is there a way to change what screen is displayed while the DI is charging?
View 5 Replies View RelatedIs there a way, app or otherwise, to keep the dialer pad on the screen.
It becomes a pain in the butt when I have to use it for choosing options in a call menu.
I am using:
Android 4.0.3
OpenCV 2.4.2
Samsung Galaxy S2
The face-detection example (from the opencv 2.4.2) is working perfectly. But now, I would like to create a custom layout and actually work with just the data extracted from face detection and build a game on it. Not necessarily having the FdView surface taking the entire screen.
I have done these modifications below, but just a black screen is displayed. Nothing appears on the screen.
Changed the BaseLoaderCallback in FdActivity.java
Code:
//EXPERIMENT
setContentView(R.layout.fd);
FdView surface = (FdView) (findViewById(R.id.FdView));[code]....
I've a two month old Haier W910 with stock ROM. The other day, when switching on the phone, the device displayed white snow. The device function normally - touch screen, audio, wireless and cellular (accept calls) but the screen continue to show white snow (like old analog TV).
I found a youtube video showing the same symptom and one of the comments suggested that the phone need to re-flash ROM and it will solve the problem. The youtube video posted confirmed that it did. Since then and for the past 3-4 days I've been trying to flash my phone but it doesn't work. I'm able to put the phone in "Download mode" and use fastboot to flash a recovery boot, oem unlock works but I can't seems to reflash full ROM: I can't use the "update.zip" method as a I can't see the screen and when I try to flash different ROMs under www.needrom.dom using 'fastboot update' it keep saying:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I can't flash the rom in "recovery mode" as I can't see the menu and select the proper option.
I guess I also need to replace the bootloader as the screen is white snow from the very beginning..
So the question is: how can I do a device full reflash WITHOUT using the screen (preferably in fastboot)
i have here a 7'' tablet that i would like to insert in a acessorie in my car. the problem is that once inserted, i cannot seed the entire screen. i have to reduce the screen displayed in the tablet to match the accesorie size. is any app or mod to do it?
View 1 Replies View RelatedOur application displays widgets that update every minute through Alarm. It works fine under 1.5 and 1.6 but since 2.0, widget is not displayed at all. Only initial layout is displayed.
View 2 Replies View RelatedIs there such a thing for the HTC desire? also, is there a app that lets you see how many multi touch points the htc desire has? i saw some youtube vids where that have this app and they put as many fingers as they can on the screen and scribble around.
View 2 Replies View RelatedI have a custom component which consists of 2 text view and 4 toggle buttons. I want to draw this view at some specific position on the screen. How is that possible?
View 1 Replies View Relatedi go the problem with my Note 10.1 gt-n8000 after flash rom, the desktop screen alway appear a specific hardware screen overlay all windows, so that i cannot see other, but still touch these screen as normal just hard.
View 1 Replies View RelatedJust picked up my incredible, and I have two questions....
1. how do i change the email notification to a specific sound? As of rite now, when i receive an email nothing happens (no sound or vibrate).
2. How do I select a specific ring for mms. I know how to select sms, but I cant figure out how to change the mms.
I know that there is an app which allows assigning keyboard to screen mode (potrait or landscape), but is there any app which can do the same witch application?
View 9 Replies View RelatedI've thought there might be a shell script I could run, maybe get an app that can run shell scripts from an icon on the home screen--but I don't know what that script would need to be, since it couldn't be about killing a process because that process ID is probably going to be different every time, and I don't know if it would require root. Rooting my phone is not an option.
I'm going to assume though that there's probably no answer to this and that I'll just have to keep going in by hand to force stop the app via prefs/apps/name-of-app/force stop. I just wish these app makers would have an exit option. Twitter and Vine and Growlr are examples of these programs with this kind of behavior. Facebook as well, but that'll just reload itself when you force quit it because it's a special "system app". I mean, I'm not expecting them to exit when I just go to the home screen, that would be silly, but I'd like SOME sort of option to close them besides going through the hassle of force stopping them via the OS preferences.
I want there to be NO chance whatsoever that these programs are going to access data in some way once I'm done using them. I have no problem with whatever the programs want to do when I WANT them running, but when I'm done using them, I want to be able to quit them, and it has nothing to do with wanting to have more free memory.