For common linux, we provide a kernel driver and also a X11 module for our device. Since Android use the same linux kernel, I guess our kernel driver should work... Well, how about X11 module? does Android includes Xorg ? If not, what's target we need to do for our original X11 module/driver?
View 3 Replies
How do I build the wlan module? When I build, the makefiles copy the vendor/.../wlan.ko to out/.../wlan.ko. What I really want to do is put some new features in the wifi driver for Android. Anybody know?
View 4 Replies View RelatedA module (connectivity-bridge) has been developed to connect the Android device via USB (OS: Windows XP). And any applications can send (read) data into (from) device through this module without using original module adb.exe. My module works with devices through AdbWinApi.dll (from Android SDK). So my module works with devices (connected via USB) analogously to original adb.exe module. Developed module work successfully: I can find devices, send data into found device and read response.
But I have problem, when original adb.exe is started and forwarded (with same ports) on device which already connected via my tool. In this situation a many errors occurres at reading data from connected device.
What root cause of this problem? How I can fix this problem?
I'm tinkering with building and installing Android from source. Basically I've got it down fairly well, but I seem to have run into a bit of a problem with the wlan module, probably from HTC.
Having pulled the 2.6.27 kernel sources and built that with a .config pulled from the phone, and using that as the kernel image instead of the prebuilt one, I get the following wifi failure message in dmesg:
wlan: version magic '2.6.27-00205-gf2dabc0 preempt mod_unload ARMv6 ' should be '2.6.27-00392-g8312baf preempt mod_unload ARMv6 '
probably because the .config I pulled from the phone has:
CONFIG_LOCALVERSION="-00392-g8312baf"
So I rebuilt with the '00205' localversion and now I get in dmesg:
[61.122497] wlan: Unknown symbol trout_pwrsink_set
but trout_pwrsink_set was changed to htc_pwrsave_set way back in February:
[ARM]: trout: Switch from trout_pwrsink -> htc_pwrsink 33/8933/1 http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=44a01f...
I'm clearly getting an obsolete wlan module somehow, Any ideas for how I can get a wlan module that goes with the '00392' kernel would be appreciated.
In case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
I am currently making an application that's to work as auto-theft.The user whose mobile is stolen sends an sms to his phone and it's intercepted by the application installed in the phone.According to the format and instructions the phone performs the task.I am making a module to hide the contacts on a particular instruction.How do I go about it.I have worked on inserting and updating contacts but how do I hide them, such that they are not visible in the native contacts app.They should become visible when the user sends another instruction.that means they are not to be deleted.and I had another query related to this.how do we delete a contact?
View 2 Replies View RelatedI am trying to make a DRM module downloadable on Android.
I've already applied our modules in embedded system. To apply a DRM module in Android, I made it as a CPM Plug-in of OpenCore and added its uuid in pvplayer.cfg. After applying, DRM-protected music contents can be played in Music Application of Android.
I've planning to make the module downloadable because I want that drm- protected music contents can be played in not only new android phones but existing android phones, after a user downloads and installs it in their phones. BUT, we have a lot of difficulties in finding method.
If anyone knows any method, could you tell me? I have another question. When myAppl.apk is installed in Android, I want a .cfg file written in /system/etc. Is it possible?
I'm porting android to Devkit8000 which is a BeagleBoard clone. I have a GPS module connected on /dev/ttyS0. I could successfully get NMEA output when writing "cat /dev/ttyS0" in the terminal emulator.
I want to know how to let android know that there is a GPS module on /dev/ttyS0 and it is outputting NMEA standard? To be able to use the android.location class with it! or test it with any GPS app in the store!
Is there something to edit in the android's source? adding driver for example, writing a code with android-ndk or what?
I have writeen a program to check the location from GPS module and I need to get a signal once two minutes. So, I use the function
> requestLocationUpdates(mLocationPrivider, 1000*120, 0,mLocationListener);
I have a rooted Nexus 5 with stock rom.
I tried to use xposed module "flying android", it works when I start it within apps overview, but not as explained in the video by pressing long the home button. I always get the google now icon.
What are the video resolutions supported by the PV codes in the opencore module? Is there a manual or guide describing this?
View 2 Replies View RelatedI switched to SDK-1.5-R2, and also the source code released in May, 2009. But when I start to compile the Launcher module, lots of errors occurred.
Some classes cannot be resolved cause there are no such classes in Android.jar file. I.E. android.os.ServiceManager; android.app.ISearchManager;
and some fields inherited from parent class cannot be resolved either. I'd be very appreciated if anybody help me out of this problem.
I'm at a loss trying to get Astro to communicate with my Windows XP home computer. I downloaded the SMB module for my MotoDroid, but am not really clear on how to configure my Windows Networking settings and what exactly needs to be entered in Astro's configuration settings. Is there a guide on how to do this on the web?.. if so, I haven't been able to find it.
View 24 Replies View Related i'm a computer forensics student who's trying to explore android forensic possibilities. I have compiled a module for testing devices (i have access to a Samsung S2 and a Galaxy Nexus running 4.1 and 4.0 respectively) in which i want to insert the module into the phone (i.e. insmod module.ko).
My problem is, i'm always faced with the problem of "insmod invalid module format" everytime i try to insert the module into the phone. I know that i can correct this by reflecting the appropriate kernel version in the vermagic string when i compile my module but i wanna find a generic way to do this; in other words, i wanna find a way to bypass this kernel version checking everytime i try to insert the module.
I've come across insmod having the -f flag as stated here (this would theoretically bypass the kernel version checking and i wanna verify this theory) insmod.
Is there any method to find the manufacturer of the WiFi module inside the tablet and the mAh of the battery without disassembling the tab?
View 3 Replies View RelatedUnable to install MODULE, I have a problem regarding my A13 android tablet device. It doesn't matter if I will post the brand name of my tablet or whatever because what I only wanted to fix is this. When I follow every instruction written at this link, and following instructions 1-7, after reaching step 5 execute run.bat. It displays the following image I screen captured. (And my tablet doesn't reboot, it's the sign that the computer can't access my tablet.
Obviously, my tablet is connected to the computer via USB cable after running the run.bat as administrator.But what is the problem why it is happening to me. (Additional information: I already installed and followed this instruction on this same device with no error at all. But why does it happened to me even I installed this with success before. I don't change any system file on my tablet before, and I don't know because,I didn't change any file or modify file neither on my tablet nor from my PC.)
I finally received my Sprint Hero yesterday and have been using the hell out of it since. Today, I rooted and installed Fresh 2.3.3 and I'm loving it so far - in fact, I'm using wireless tether right now, as where I'm at, I have no internet yet. The thing is, I'm wondering how to overclock now. I've been attempting to read-up on it and it sounds a little complicated, almost as though I need to rewipe my phone and set everything up again. Is this the case?
Looking at this, I've been trying to decipher it:
[KERNEL][7/22/10]Darchstar's Overclocked Undervolted kernel for senseUI roms vUV 2 - xda-developers
What exactly is a module remover and why do I need to do it? Moreover, I didn't see an option to flash a new kernel (maybe I just wasn't paying attention) when I was in the RA or whatever it's called. I'd love to get my Hero running a little bit quicker. Otherwise, I'm loving the thing so far.
Vista Ultimate 32 bit. after installing htc sync 2.04 (and any other version I can find). I get capi_worker module stopped working message on reboot.
I've tried all the options I can find regarding adding com ports - updating sony drivers etc. anyone had this - got a working fix?
<3>[ 154.264768] bcm4329: version magic '2.6.35.14-cyanogenmod-g1ad182f preempt mod_unload ARMv7 ' should be '2.6.35.14-cyanogenmod-g704f542 preempt mod_unload ARMv7 '
I've successfully built the samsung-kernel-crespo kernel from the cyanogenmod git. I unpacked a working ramdisk from a nightly and repacked it with my kernel, when i try to load the module i get the above error, The "extraversion" info that in the "about phone" tab in sittings is 2.6.35.14-cyanogenmod-g704f542, as well as the version of the modules. but for some reason the kernel is looking for that 'g1ad182f ' instead.
I loaded the module via fastboot boot boot.img and i didnt full on flash it to the phone. I backed up the working kernel module and put the new one in /system/lib/modules, rebooted the kernel and the wifi is still giving me an error.
If i try to manually insmod the module and it hangs, if i use modprobe then lsmod it says its "loading" but never loads.
the phone im working on is a nexus s if that matters.
I have a rooted Iocean G7. I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.
how can I install the framework module without getting a bootloop or other problems?
If a kernel does not have the Advanced Routing feature (which is needed for VPNC widget - Cisco VPN) is it possible to add this via module like tun.ko module? The Adv. Routing is not needed for connecting but the connection is soon lost.
View 1 Replies View RelatedMilestone Overclock as of version 1.4.3 now officially supports Droid X/2 running 2.2/Froyo. Go download it for FREE from the Market.
View 49 Replies View RelatedI have a device labelled Superpad VI. everything was okay but when i tried firmware update, its wifi stopped working and started giving "error" when i try to turn it on. Now I have just figured out that the original superpad VI has ralink wifi chipset whereas this device has realtek rtl8188cus chipset. so when i try to install superpad VI firmware, everything else works but wifi doesn't. Now how do I need to install the drivers for wifi? I have found the Linux/Android drivers from Realtek website but they need to be compiled. I know nothing about compiling/programming and Linux itself.
The un-compiled drivers can be found here (under rtl8188cus) [URL] ....
Was just wondering if any devs out there would be willing to make an xposed module to change font color. Hope i posted this in the right section.
View 4 Replies View RelatedIs there any xposed module to change the menu backgrounds / the slider colors?
This blue background and the blue slider?
And these backgrounds
I know many themes change these backgrounds, but i was wondering if a xposed module out there which can do this
I use the following command to fetch all the source code of android
repo init -u git://android.git.kernel.org/platform/manifest.git repo sync
but I can not get platform/external/alsa-lib.git and platform/hardware/ alsa_sound.git
I don't know what's the rule for repo to fetch the code from http://android.git.kernel.org/
Where can I find the "module remover" that I must flash prior to flashing 710 kernal to improve speed on Fresh Rom? Looked all over but can't find.
View 2 Replies View RelatedSince I updated my Samsung S4 to 4.3 I can't find a lot of contacts in the texting module. This is what happens: open screen for new text message, click in the receivers line, start typing. A lot comes up but most contacts with mobile numbers are missing. A lot of other useless records come up (e-mail addresses, LinkedIn, etc.).
Is this a setting? A bug? If so, is there a work around?
I'm searching a mod to install on my galaxy s4 i9505 that can add a little button on the top edge of statusbar that can lock the screen if pressed.
Something like the attachment.
On android 4.2.2 there is 3minit framework, but I can't find a similar mod for android 4.3.
I needed a tun.ko module for my kernel, so I tried compiling my own kernel.
The kernel did build OK, and also boots OK, the only problem is that I cannot load any modules.
It seemes, that the module tools (insmod, modprobe etc) looks for the modules in /lib/modules, and I have them in /system/lib/modules, so my wifi does not work, as I cannot load the module.
Where I can specify the kernel module load path in the .config file?
Example:
# cd /system/lib/modules
# ls -l
-rw-r--r-- root root 315403 2008-08-01 14:00 bcm4329.ko
-rw-r--r-- root root 211573 2008-08-01 14:00 tun.ko
# modprobe bcm4329.ko
[Code] .....