General :: Unable To Install MODULE
Dec 10, 2013
Unable to install MODULE, I have a problem regarding my A13 android tablet device. It doesn't matter if I will post the brand name of my tablet or whatever because what I only wanted to fix is this. When I follow every instruction written at this link, and following instructions 1-7, after reaching step 5 execute run.bat. It displays the following image I screen captured. (And my tablet doesn't reboot, it's the sign that the computer can't access my tablet.
Obviously, my tablet is connected to the computer via USB cable after running the run.bat as administrator.But what is the problem why it is happening to me. (Additional information: I already installed and followed this instruction on this same device with no error at all. But why does it happened to me even I installed this with success before. I don't change any system file on my tablet before, and I don't know because,I didn't change any file or modify file neither on my tablet nor from my PC.)
View 5 Replies
Apr 8, 2014
I have a rooted Iocean G7. I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.
how can I install the framework module without getting a bootloop or other problems?
View 9 Replies
View Related
Jun 11, 2013
I am trying to compile a WiFi driver (ath6kl) for my Sony Xperia E (Android version: 4.1.1, compilation: 11.3.A.0.47). I have downloaded the source code for compilation 11.3.A.0.47 from here: developer.sonymobile.com/downloads/xperia-open-source-archives/open-source-archive-for-build-11-3-a-0-47
I have compiled required kernel modules (cfg80211 and ath6kl_sdio), but I have encountered some problems during this proccess. I don't understand why on my android device (in /system/lib/modules/ath6kl) there are two modules: ath6kl_sdio.ko and cfg80211.ko (first one depends on the second one). But when I look at my sources, I see the following module dependencies for ath6kl: ath6kl_sdio -> ath6kl_core -> cfg80211. So there are 3 modules instead of 2. Anyway, after some modification (I merged ath6kl_core and ath6kl_sdio into one module) I managed to compile ath6kl.
I have replaced compiled modules in /system/lib/modules/ath6kl on my android device, then rebooted and I got the following error:
<4>[ 23.055226] ath6kl_sdio: disagrees about version of symbol cfg80211_sched_scan_results
<4>[ 23.055251] ath6kl_sdio: Unknown symbol cfg80211_sched_scan_results (err -22)
[Code]....
I am very desperate cause I want to modify this driver (to be able to calculate some network statistics) but I cannot load modules at all so I am stuck.
View 1 Replies
View Related
May 17, 2009
I'm tinkering with building and installing Android from source. Basically I've got it down fairly well, but I seem to have run into a bit of a problem with the wlan module, probably from HTC.
Having pulled the 2.6.27 kernel sources and built that with a .config pulled from the phone, and using that as the kernel image instead of the prebuilt one, I get the following wifi failure message in dmesg:
wlan: version magic '2.6.27-00205-gf2dabc0 preempt mod_unload ARMv6 ' should be '2.6.27-00392-g8312baf preempt mod_unload ARMv6 '
probably because the .config I pulled from the phone has:
CONFIG_LOCALVERSION="-00392-g8312baf"
So I rebuilt with the '00205' localversion and now I get in dmesg:
[61.122497] wlan: Unknown symbol trout_pwrsink_set
but trout_pwrsink_set was changed to htc_pwrsave_set way back in February:
[ARM]: trout: Switch from trout_pwrsink -> htc_pwrsink 33/8933/1 http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=44a01f...
I'm clearly getting an obsolete wlan module somehow, Any ideas for how I can get a wlan module that goes with the '00392' kernel would be appreciated.
View 3 Replies
View Related
Apr 16, 2014
firstly it was only 35 mb Free .i was unable to install new app..then i deleted tombstone and log in data and got some space...further i found a folder that i do not understand....it is data/core...... i am using micromax a116 rooted..
View 4 Replies
View Related
Oct 4, 2013
I have a backup file made with Titanium Backup for GMD GestureControls, but for some reason I'm unable to restore it to the phone! It just hangs with the box saying "restoring" and at 0%. If I try to install it from the APK it just says "App is not installed".
Really frustrating because I've been able to install/restore things flawlessly before and now, what gives with this junk? I've used ADB to push the apk to /system/app but that didn't work either!
View 4 Replies
View Related
Apr 12, 2014
I got the tronsmart vega s89 and I can't install purchased apps on it I get error (couldn't install on USB storage or SD card) funny thing is no first time I tried install I didn't have sd card in. I have looked for the temp file smt2 or whatever it is, its not here. This device is on kitkat and I think has a bad path to install location. Can I Change the install location? This error only happens with purchased apps NOT free ones.
View 5 Replies
View Related
Mar 16, 2013
I have installed CWM recovery and it works. But after I have done something and installed Go Launcher, my CWM recovery seem not working already. I search and found out I have install another recovery TWRP using GOOManager. But when I use GOOManager and click install openrecoveryscript, it say 'no recoveries were found for your device'.
When I run "adb devices" command, I don't see my devices coming out also.
View 5 Replies
View Related
Apr 2, 2014
I have rooted my karbonn a4+ but I am unable to install any custom rom as I am not able to find The cwm recovery.
View 1 Replies
View Related
Aug 23, 2013
Starting today am unable to download or update any app from official play store on an rooted device. Any clues to resolve this ?
View 1 Replies
View Related
Feb 5, 2014
I have never been able to install Motorola Device Manager on 3 different computers. My problem is just like this Motorola Device Manager won't install!!! except when I click on the link in post #12 (#1 on the list in that post) it says the troubleshooter is not available.
View 2 Replies
View Related
May 26, 2014
i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop .
View 9 Replies
View Related
Sep 13, 2013
I am getting this error during installation time
unknown error code during application install -24
I cleared cache abd defaults if play store but still the issue persist.
View 2 Replies
View Related
Feb 24, 2013
The procedures mentioned to root or install CWM Recovery in Huawei x3 U8510 requires you to go to USB Debugging mode in Settings but my device does not have a working Stock ROM.
I am able to boot into the Stock Recovery mode (Volume + and power button) but unable to install CWM(tried several versions for U8510), SU, Custom ROM etc cuz it says signature verification failed even though I tried cmw zip files which were signed.
I tried going into download mode by pressing Volume - and power button that didn't work too. Even though the Huawei symbol came up I couldn't root the device using
P.S: I couldn't find any of the latest ROMs for this device too!
View 1 Replies
View Related
Jun 14, 2012
I have recently purchased a pendo pad http:[url].... and it has a getjar apps store on it instead of google play, I have attempted installing the gplay store on the device with the .apk and that didn't work.
View 1 Replies
View Related
Apr 13, 2012
i have been unable to move/install apps to my sd card ever since changing to MIUI I'm not sure whether this is a problem with the ROM or not (i think i may have insalled applications to SD on a previous GB version of MIUI)
I am using a rooted Samsung Galaxy S2 I9100 with the latest MIUI based on 4.0.4. before MIUI i was on CM7 stable and i remember messing around with some settings there to try and get my phone to read music off the sd card as well as internal memory-(where all my downloaded music was going). I also may have done a dodgy partition on my old 32gb micro sd or some how partitioned my internal storage of my phone...
I have recently successfully partitioned my Sandisk 64gb micro SDXC to this tutorial...
[URL]...
when i go to move a 'moveable' app eg. Paypal through 'Link2Sd' it comes up with an error saying "pkg:/data/app/com.paypal.android.p2pmobile-1.apk Failure [INSTALL_FAILED_CONTAINER_ERROR]
when i go to move a 'moveable' app through 'App 2 SD Pro' it says 'couldn't move app'
the following are my phones storage details...this last picture was taken before i partitioned my SD
View 9 Replies
View Related
Apr 11, 2013
I use a Note 2, and was able to install apks perfectly fine until this afternoon, now i'm unable to click "install" , it isn't greyed out or anything. I know screen filter and similar apps have a bug which doesn't allow you to click install, so I disabled and uninstalled them just to be sure.
I'm on stock 4.1.2, no software updates of any sort in the last month,weird it suddenly stopped allowing me to install apks
Able to install apps from the play store otherwise.
Edit- Also rebooted several times, and tried installing apks i've installed before, no dice And I do have unknown sources checked.
View 2 Replies
View Related
Nov 22, 2013
I recently rooted, and unlocked the bootloader on my atrix hd (ATT)
Since then I tried installing cm10.1 multiple times on the secondary "Rom slots" within the bootloader, without any success. So I finally decided to go for it and install cm10.1 in the "stock rom" slot, Prior to doing this I did a back-up using Rom manager. Aand now I seemingly can't even boot into recovery mode, every time I restart my device it simply goes to the cyanogenmod blue ring thingy and gets stuck! (I have left it for 15-20 mins thinking it might be some kind of installation process..) I have both windows 8 and Ubuntu installed on my pc, just saying.i've even tried holding down all three physical buttons and it simply takes me back to the same screen!!!
View 1 Replies
View Related
Jan 2, 2013
Is there any method to find the manufacturer of the WiFi module inside the tablet and the mAh of the battery without disassembling the tab?
View 3 Replies
View Related
Mar 23, 2012
<3>[ 154.264768] bcm4329: version magic '2.6.35.14-cyanogenmod-g1ad182f preempt mod_unload ARMv7 ' should be '2.6.35.14-cyanogenmod-g704f542 preempt mod_unload ARMv7 '
I've successfully built the samsung-kernel-crespo kernel from the cyanogenmod git. I unpacked a working ramdisk from a nightly and repacked it with my kernel, when i try to load the module i get the above error, The "extraversion" info that in the "about phone" tab in sittings is 2.6.35.14-cyanogenmod-g704f542, as well as the version of the modules. but for some reason the kernel is looking for that 'g1ad182f ' instead.
I loaded the module via fastboot boot boot.img and i didnt full on flash it to the phone. I backed up the working kernel module and put the new one in /system/lib/modules, rebooted the kernel and the wifi is still giving me an error.
If i try to manually insmod the module and it hangs, if i use modprobe then lsmod it says its "loading" but never loads.
the phone im working on is a nexus s if that matters.
View 1 Replies
View Related
Nov 5, 2012
If a kernel does not have the Advanced Routing feature (which is needed for VPNC widget - Cisco VPN) is it possible to add this via module like tun.ko module? The Adv. Routing is not needed for connecting but the connection is soon lost.
View 1 Replies
View Related
May 20, 2012
I have a device labelled Superpad VI. everything was okay but when i tried firmware update, its wifi stopped working and started giving "error" when i try to turn it on. Now I have just figured out that the original superpad VI has ralink wifi chipset whereas this device has realtek rtl8188cus chipset. so when i try to install superpad VI firmware, everything else works but wifi doesn't. Now how do I need to install the drivers for wifi? I have found the Linux/Android drivers from Realtek website but they need to be compiled. I know nothing about compiling/programming and Linux itself.
The un-compiled drivers can be found here (under rtl8188cus) [URL] ....
View 4 Replies
View Related
Mar 5, 2014
I have a rooted Nexus 5 with stock rom.
I tried to use xposed module "flying android", it works when I start it within apps overview, but not as explained in the video by pressing long the home button. I always get the google now icon.
View 9 Replies
View Related
Aug 17, 2013
Was just wondering if any devs out there would be willing to make an xposed module to change font color. Hope i posted this in the right section.
View 4 Replies
View Related
Feb 7, 2014
Is there any xposed module to change the menu backgrounds / the slider colors?
This blue background and the blue slider?
And these backgrounds
I know many themes change these backgrounds, but i was wondering if a xposed module out there which can do this
View 9 Replies
View Related
Oct 25, 2013
I'm searching a mod to install on my galaxy s4 i9505 that can add a little button on the top edge of statusbar that can lock the screen if pressed.
Something like the attachment.
On android 4.2.2 there is 3minit framework, but I can't find a similar mod for android 4.3.
View 6 Replies
View Related
Sep 28, 2011
I needed a tun.ko module for my kernel, so I tried compiling my own kernel.
The kernel did build OK, and also boots OK, the only problem is that I cannot load any modules.
It seemes, that the module tools (insmod, modprobe etc) looks for the modules in /lib/modules, and I have them in /system/lib/modules, so my wifi does not work, as I cannot load the module.
Where I can specify the kernel module load path in the .config file?
Example:
# cd /system/lib/modules
# ls -l
-rw-r--r-- root root 315403 2008-08-01 14:00 bcm4329.ko
-rw-r--r-- root root 211573 2008-08-01 14:00 tun.ko
# modprobe bcm4329.ko
[Code] .....
View 2 Replies
View Related
Jan 19, 2014
I'm not technically inclined to develop a xposed module, but was using the 8sms app. I loved it since it mixes stock sms with cyanogenmod, but doesn't display FB contact pictures , only googles or contacts on your phone who you've added a picture for. Is there any way a xposed module could be developed to enable 8sms to pull contact pictures from fb? Not necessarily a request as far as throwing it out there and gauging community feedback (although, yeah, this would free many of us from samsungs sms app and make 8sms more appealing). What do you think? Is this possible to do?
I should probably add I'm on android 4.2.2, stock Galaxy s4 for t-mobile and rooted. And yes, I'd flash cyanogenmod but I do need t-mobiles wifi calling do to zero coverage at home.
View 1 Replies
View Related
May 22, 2014
kernel compiling with GCC 4.8 google toolcahin:
Got this error during generating bcmdhd module:
Quote:
CC [M] drivers/net/wireless/bcmdhd/wl_cfgp2p.o
drivers/net/wireless/bcmdhd/wl_cfgp2p.c: In function 'wl_cfgp2p_act_frm_search':
drivers/net/wireless/bcmdhd/wl_cfgp2p.c:769:31: error: array subscript is above array bounds [-Werror=array-bounds][code].....
View 3 Replies
View Related
Mar 26, 2014
I'm looking for app or Xposed Framework module, which displays WiFi SSID in statusbar near to WiFi icon. It is possible?
View 2 Replies
View Related
