My logcat window in Eclipse only displays the first few lines of the Stack Trace for each exception. This means that I often can't see where an exception occurred. Is there any way to change this setting?
View 1 Replies
Does anyone know if there is standard way to get error reports from android applications running on other people's android devices? E.g. I release an android app and it goes out there. I'd love for any error to trigger an apology screen that invited the user to input a description of what happened, and then have that data along with program state and stack trace sent back to me.
View 4 Replies View RelatedDoes anyone know how to print stack traces for exceptions caught while running in the Android emulator in Eclipse? I catch the exception and call .printStackTrace() but I cannot find where it is being written. I have tried .printStackTrace(System.out) and .printStackTrace(System.err). I would be nice to be able to direct them to the Eclipse console.
View 2 Replies View RelatedI tried to create the launcher widget for getting some messages from social networking server. I hope it can support autoLink feature of these message content. however, it will have the "Stack Overflow exception" when android:autoLink="web|email" is enabled when getting more than 20 messages. this issue doesn't happened when I remove this parameter. would you please share your experience about this issue?
View 2 Replies View Relatedis there a way in android to get the call stack when an unhandled exception occurs? or better yet, to trap an unhandled exception and do something when it occurs.
View 3 Replies View RelatedI'm currently working on an android app that pulls a list of forums from a JSON feed. I'm trying to parse the feed and immediately upon calling getJSONArray a JSON exception is being thrown with no stack trace. The JSON being returned is stored in an JSONObject jobj with the format as follows: However when running the following code, I get an immediate exception without a stack trace: Code...
View 1 Replies View RelatedI am trying for a simple program in android,i mistakenly closed logcat window,and i want to know how to enable it?
View 3 Replies View RelatedLogcat in eclipse has been working fine for me until bout a week ago. I'm not sure how I managed to do it to both my of development environments. (PC and Mac). I get the follow error when I open up logcat in eclipse.
Could not create the view: For input string: "Debug"
java.lang.NumberFormatException: For input string: "Debug" at java.lang.NumberFormatException.forInputString(NumberFormatException.java: 48) at java.lang.Integer.parseInt(Integer.java:449) at java.lang.Integer.parseInt(Integer.java:499) at com.android.ddmuilib.logcat.LogFilter.loadFromString(LogFilter.java: 134) at com.android.ide.eclipse.ddms.views.LogCatView $FilterStorage.getFilterFromStore(Unknown Source) at com.android.ddmuilib.logcat.LogPanel.createFilters(LogPanel.java: 1229) at com.android.ddmuilib.logcat.LogPanel.createControl(LogPanel.java: 441) at com.android.ddmuilib.Panel.createPanel(Panel.java:29) at com.android.ide.eclipse.ddms.views.LogCatView.createPartControl(Unknown Source) at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java: 375) at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java: 229) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java: 595) at org.eclipse.ui.internal.WorkbenchPage $ActivationList.setActive(WorkbenchPage.java:4218) at org.eclipse.ui.internal.WorkbenchPage $18.runWithException(WorkbenchPage.java:3277) at org.eclipse.ui.internal.StartupThreading $StartupRunnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java: 134) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java: 3586) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3279) at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java: 803) at org.eclipse.ui.internal.Workbench $31.runWithException(Workbench.java:1567) at org.eclipse.ui.internal.StartupThreading $StartupRunnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java: 134) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java: 3586) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3279) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java: 332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java: 664) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java: 149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java: 115) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java: 196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLauncher.java: 110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java: 79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java: 369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java: 179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java: 39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java: 25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
I was wondering if anyone knew how to restart LogCat without rebooting eclipse? Every once in a while LogCat will just die while I'm working and it seems like there should be a to get it working again. I've tried restarting the adb task, but that was just a haphazard guess at a solution.
View 4 Replies View RelatedDoes anyone know how to get the eclipse logcat output to switch from emulator to device and back again? I am often developing, and using emulator and device in tandem, mainly because I can trace the http comms on the emulator and not on the device, and logcat gets stuck on whichever is launched first from eclipse. Right now the only way to get logcat output switched over is to restart eclipse, which is a little time-consuming. Anyone know another way to achieve the same thing?
View 4 Replies View RelatedI am getting this error automatically sent to me from a lot of beta users. ava.lang. Illegal ArgumentException: View not attached to window manager at android.view. Window Manager Impl.findViewLocked(WindowManagerImpl.java: 355) At android.view.Window Manager Impl. removeView(WindowManagerImpl.java:200) at android.view. Window $LocalWindow Manager . removeView(Window.java:43 2) at android.app.Dialog .dismissDialog(Dialog.java:278) at android. app. Dialog. access $000 (Dialog.java:71) at ndroid.app .Dialog$1.run (Dialog. java:111) at android .os.Handler.handleCallback(Handler.java:587) at android.os. Handler. dispatch Message(Handler.java:92) at android. os.Looper. loop (Looper.java:143) at android.app. Activity Thread . main (Activity Thread.java:4701) at java. lang.reflect .Method.invokeNative(Native Method)at java.lang.reflect.Method.invoke(Method.java:521) At com.android. internal.os. ZygoteInit $Method And Args Caller.run (ZygoteInit .java:868) at com.android.internal. os. ZygoteInit .main(ZygoteInit.java:626) at dalvik . system . Native Start.main(Native Method) Since it comes from external beta users I dont know what they were doing when they got it. Nor do i know how to reproduce it. The stack trace does not list any of our code. Usually, this error means that there was an orientation change while a dialog was open, thereby invalidating the reference to the dialog when android recreates it. All of my activities already uses Android:configChanges="keyboardHidden|orientation" in order to prevent them from doing this. We still get the error. Has anyone else seen this before? What could be the problem?
View 6 Replies View RelatedI have seen this problem off and on while running the Eclipse (Galileo) under Fedora 11-13, whether the target is my device or an emulator. But now with my new device, the HTC T-Mobile G2 (Android 2.2), I see it much more frequently: I successfully download the app (complete with lots of Log.d() calls), the system successfully launches it, but the LogCat pane in the DDMS perspective is completely blank.
Sometimes, only sometimes, I seem to be able to kick it into action by clicking on the tool for Debug (the little bug one). But that doesn't even work all the time. Worse yet, it forces me to restart the whole program, which is very cumbersome.
And yes, I did remember to connect the device and make sure the device shows up under "adb devices", AND make sure that is the device the ADT downloaded to. I can even hit breakpoints in the code.
I suppose I could try relying only on the debugger, but I put a lot of work into writing those Log.d statements in the right place, it would be a giant leap backwards to do without them now. So any suggestions concerning what the problem might be, workarounds, or how to find relevant bugs logged against either ADT, SDK or the G2, would be welcome.
Google searches such as "android ddms logcat" have not helped so far.
I have also considered running ddms from the commandline, but the instructions on how to do this wtihout conflicting with the port already chosen by ADT for running DDMS are not clear enough to inspire confidence: so I always quit Eclipse before running the command line version of ddms. But then I lose the handy ability (provided by Eclipse) of navigating my source code while reading the log, so this too, is an inferior solution. Perhaps if someone can connect a few more of the dots in Google's instructions on this by explaining how to get the device and command-line DDMS to agree on a port while still running Eclipse, that would be a good solution.
I was playing around with the Motorola MotoDev IDE, which is kind of a jazzier front-end to Eclipse, and it asks you on startup if you want the Android emulator to show up in an IDE window. I said yes. That makes the emulator show up in an Eclipse tab, like the Console, Outline, etc. After a while it became apparent that MotoDev wasn't sufficiently different than Eclipse to make it worth the install. So I got rid of it. This is on Mac OS X with Snow Leopard. Now when I start Eclipse and run any Android project, even Hello world, the Console shows the emulator installing and the APK installing, and the Intent starting. But no emulator window. I found a setting in Eclipse->Preferences->Android->Launch Settings that said -no-window for the emulator. MotoDev must have set that. That had to be it. I got rid of it and still no Emulator. So I got rid of Eclipse, the SDK, everything and did a full fresh install of everything. Still no emulator window. I can start the emulator with an AVD from the command line fine and I see it. But from Eclipse, nada.
View 2 Replies View RelatedCan you create a popup window in eclipse with web view in it, if so remotely how to achieve this. Im trying to get part of an app when loaded to automatically popup a web view box over the top of everything
View 1 Replies View RelatedI installed Eclipse Juno 4.2.0. When I start it, it just comes up with a blank window without the panes. Looks like the attached image I tried all the menu items to no avail.
View 3 Replies View RelatedI attempt to "Select the complete widget and use the Properties view to set the property "background" to the color attribute "myColor"." I can select the widget, highlight the 'Background' property, and when i press the [...] button in the value column the Reference Chooser Window never appears and the Value [...] button disapears. Reproducible: Always
Steps to Reproduce:
1.Highlight the Widget in the Layout View
2.Highlight the Background Property
3.Press [...] button under Value
There is a TextField "Filter" below the LogCat output. However, it seems to filter only the Message-column. Id like to filter Tags also. Because there are my class names. How can I achieve it?
View 2 Replies View RelatedI have been following the Android getting started docs and when I try to run the project I get: !MESSAGE An internal error occurred during: "Launching HelloAndroid". Code...
View 2 Replies View RelatedI'm just getting started with Android app development on a Mac, and I keep getting a NullPointerException everytime I go into Strings.xml to edit it. Here's the steps I followed - The project compiles and runs fine, but if I add even a single character to Strings.xml, a popup comes up that says - "An error has occured. Please see the log for details. An error has occured. Please see the log for details." When I click details, all I see is - "An error has occurred. See error log for more details. java.lang.NullPointerException" Anything I'm missing completely? Code...
View 2 Replies View RelatedThe LogCat window is open. Sometimes LogCat displays Log messages, sometimes it does not, with or without the physical target attached. Is there an enable/disable Log somewhere in the debug environment?
View 2 Replies View RelatedI'm currently developing an application for Android which needs to use a custom made Tabs. I have encountered two problems: I'm getting this exception when i want to switch from a text mode to wyswig mode in Eclipse. This is the actual xml code that gives me that error...
View 2 Replies View RelatedI have a small problems with animations. I have a custom View Group inside of a Frame Layout. I'm animating one of the children of my custom View Group with a Translate Animation. The problem is that the View that I'm animating leaves traces, so it's like the entire screen isn't redrawn during the animation. What could be the problem?
View 2 Replies View RelatedI created a sql lite database with the following columns:
static final String dbName="demoDB";
static final String tableName="Employees";
static final String colID="EmployeeID";
public void onCreate(SQLiteDatabase db) {
// TODO Auto-generated method stub
db.execSQL("CREATE TABLE "+tableName+" ("+colID+" INTEGER PRIMARY KEY AUTOINCREMENT, "+
colName+" TEXT, "+colAge+" Integer);");
I want to select all the records in the database like this and display them in a gridview:SQLiteDatabase db=this.getWritableDatabase();Cursor cur= db.rawQuery("Select "+colName+", "+colAge+" from "+tableName, new String [] {});String [] from=new String []{DatabaseHelper.colName,DatabaseHelper.colAge};
int [] to=new int [] {R.id.colName,R.id.colAge};
SimpleCursorAdapter sca=new SimpleCursorAdapter(this,R.layout.gridrow,c,from,to);
GridView grid=(GridView)findViewById(R.id.grid);
grid.setAdapter(sca);but i receive the following exception:java.lang.IllegalArgumentException: column '_id' does not exist.the db table does not have a column with name '_id'so what is wrong with this code
What is the basic difference between the PhoneWindow and MidWindow policies? I found that the emulator version takes the implementations of the PhoneWindow.When the MidWindow implementations will be used? Also, I found that PhoneWindow handles the call settings implementation and the same is not there in MidWindow? Please someone help me pointing out the differences between both the policies and under which circumstances which one will be used.
View 6 Replies View RelatedI'm developing the Soup or Root program for droids (computer-based, no apk yet sorry) as we all know, but I'm getting so tired of having to reflash my Droid to stock ROM over and over and over! I'm now working on Soup or Root 2.0 which means I'm going to be rooting my droid multiple times again to test effectively, but I really really really like the custom ROM and settings and everything I have on there now. Is there a way that I could save my Droid's current state exactly how it is as a flash able ROM for when I'm done testing, just flash to this ROM and I'm back to what I like? That way I could flash to stock ROM, root test, reflash stock ROM, root, repeat until testing is complete, then flash to my current state (ROM backup) and be happy with my Droid? Maybe I could get the droid simulator on my computer to be recognized by ADB, what do you think? That would save me all trouble of confusing the crap out of my poor Droid!
View 8 Replies View RelatedI would like to know if android apps leave traces of themselves behind when I uninstall them (similar to how when you uninstall a windows program you'd most likely have orphan files or directories, registry entries and maybe a .dll here and there).In other words, can I install apps on my stock unrooted ICS phone being confident that if I don't like it I can just uninstall them and my phone won't be slower, or have less space because of it?
View 3 Replies View RelatedI've been using swype on 1.5 and then again on 2.1 OTA. I've always updated to the newest version and I recently did a factory data reset on my eris because I couldn't get messaging threads to delete. After factory reset, I downloaded swype from beta.swype.com on the eris and installed the latest version. For some reason when I use swype the blue guide line is a lot slower than it used to be to catch up to where i swipe my finger. It also has trouble when I circle on a letter to indicate that I want to use that letter twice in a word. That never works now. I tried going into the keyboard calibration settings and resetting the calibration to factory settings. I looked in the swype settings as well. I haven't made any changes them so I'm wonder why the line tracing and understanding what I'm swiping is not even close to as responsive as before.
View 1 Replies View RelatedI couldn't find this while searching these forums but if its already been covered please point me in the right direction. when i receive email from android forums it sends me a link to the forum that a new message was posted to. thats great an i like it doing that.. my problem is sometimes the link is "too long" and g mail cuts it off before sending it to my phone so i cant tap it. the email shows up correctly on my computer at g mail.com so i know it must be a setting in my phone or in g mails interface of what it sends to my phone.
View 3 Replies View RelatedI would like to have photos on my shortcuts for text contacts and phone contacts, but i do not have a face book page (nor do I want one). Is there some other way to assign a photo to the short cuts?
View 1 Replies View Relatedhow are you guys using the phone for speed dial.. i used any cut and pasted a bunch on the first home screen problem is i am having a problem as i accidently hit the screen and am not aware.same problem if i use contacts or log to dial.it stays on the scrren after the call and if i dont lock the screen i have the same problem.i am accidently calling.
View 1 Replies View Related