I just wrote a test app and deployed it via Google Api 2.2 emulator version 8. The emulator is running and the Android logo comes. But after that, no progress. When I checked the log, it shows a Mount Service with message 'waiting too long for ready! What should be done inorder to boot the emulator?
View 7 Replies
I had the 1.5 android emulator starting from Eclipse perfectly nicely.... until yesterday when it suddenly won't finish booting. I haven't installed anything new (Running it on Windows Vista - i know, uck, but I'm waiting for Win 7 to hurry up), haven't even changed the java code I am trying to run. The emulator starts up, get's to the point where it shows "Android" with the nice lighting effect that goes from left to right over it and then just stays in that state. Last night I tested it by starting it up, going out to the living room, watching two hour long episodes of the first series of Doctor Who, and then coming back in (Essentially giving it 1.5 hours to do it's stuff) - it was still stuck in that state. Any ideas what I did wrong?
View 16 Replies View RelatedThe emulator screen does not show up with new zImage... The steps I followed are: 1) Downloaded the android kernel from "git clone git://github.com/CyanogenMod/cm-kernel.git" 2) extracted config file from config.gz from /proc/config.gz in emulator 3) copied config file to .config in "cm-kernel" directory 4) export CCOMPILER=${HOME}/android/system/prebuilt/linux-x86/ toolchain/arm-eabi-4.4.0/bin/arm-eabi- 5) make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig make ARCH=arm CROSS_COMPILE=$CCOMPILER menuconfig make ARCH=arm CROSS_COMPILE=$CCOMPILER
View 5 Replies View RelatedI am trying to saw google map in emulator. I also have obtained googleApi key for that...but when i run my code it doesn't saw just grid insted of google map.
View 3 Replies View RelatedI am developing an android application using google maps data.I can access google maps in emulator but when i try the same in my application the google maps is not opening.
View 2 Replies View RelatedI am new to android and want to know how to connect android emulator to google account..
can we do so if yes!!! then how.
Google mapview does not load the actual maps in the emulator, just the grid. My overlays are displayed ok. sdk version 2.2. It works fine in a real phone. I use a debug key and trippel checked the manifest. It has been working in earlier projects. I just cant figure it out.. Any ideas, what to check?
View 3 Replies View RelatedI managed to sign in with my google account (using the Google API AVD), but any notes that I write does not sync to the jumpnote.appspot.com, and vice versa. I notice in the account settings, it says "sync is OFF". I click on menu and the "sync now" button, the sync icon shows up momentarily on top but nothing happened after that. The notes I wrote on the phone do not get reflected on the server. Did anyone manage to get the jumpnote sample to sync successfully via C2DM?
View 1 Replies View RelatedI'm trying to register a Google Account with the Android emulator running 2.2 API level 8. Forums suggest that you can do this by going to Settings -> Accounts, however for me I only have the option to add a "corporate" account, i.e. an Exchange account, not a Google Account. I wish to add this Google Account to test c2dm from the emulator. Does anyone know how to associate a Google account with the emulator in this build?
View 1 Replies View Relatedcan i get the source code for the simple map display on android emulator?
View 1 Replies View RelatedI'm looking for a Play Store .apk that will run on my Android (ICS) emulator. The .apk from my phone and tablet did not work. I'd like to download apps directly to my Emulator.
View 1 Replies View RelatedI run the 1.0r1 emulator and install Calendar.apk and CalendarProvider.apk on the emulator. And I configure the username and pwd from DevTools->Google Service Login successfully. Now I can start the Calendar app successfully, with the month view/week view/etc. But I don't know how to sync the calendars or events with Google Calendar service. From the source code, I assume there should happen sync operation. But it didn't happened. And I know another trigger to sync is Menu->More->My Calendars, but after selected, the activity will crash. The below is from DDMS logcat: 02-21 00:59:44.260: INFO/ActivityManager(56): Starting activity: Intent { action=android.intent.action.VIEW comp=..................
View 2 Replies View RelatedI use the google code from devloper.android.com I use that application but in the emulator it shows only the crossed lines not the map so is there any settings in emulator for displaying maps
CODE:.....
Android mainfest
CODE:..................
I created a sqlite database to store playlists for a media player I am developing because of extended feature (rather than using the Content Provider). It works perfectly on the 1.6 emulator but FCs on anything higher than 2.0... what has changed that I need to know about as far as opening databases in SDK 2.0+? Here is the logcat.
CODE:.............
Here is the dbhelper class
CODE:................
why can't stackoverflow just use tags like a normal syntax highlighter.
Unable to play youtube videos on SDK 1.5 emulator - but playing well on SDK 1.0 emulator. Can you update the source....
View 7 Replies View RelatedFinally strace gave me this:
CODE:................
And several other attempts to call "link" that also fail (sshfs does not support hard links).
Is it possible to change the emulator's behavior to create lock files somewhere in /tmp (using some hash of image path as lock file name)? I am OK to try this myself: which repositories from https://android.git.kernel.org/ are necessary to rebuild the emulator alone, and where in the sources is the code responsible for image locks?
I need to run several emulator instances to test my application. When i try to run instances using emulator -data <path> option, the emulator crashes.
I got a MS Visual Studio window informing that emulator throws a "unhandled win32 exception".
The exception message in the debugger (MS Visual Studio 2008) is: "Unhandled exception at 0x77c4706c in emulator.exe: 0xC0000005: Access violation reading location 0x03216848"
The emulator runs normally without "-data" option.
I am getting the following error when I try running my program in the emulator:
emulator: ERROR: the user data image is used by another emulator. aborting`
I was just messsing about and flipping through screens and settings and noticed that the phones uptime was at 9 days. This is because at night I either tend to leave it on wifi or just put it to aeroplane mode.
But I was just wondering if there is any benefit to the phones OS or memory if it is occasionally switched off and rebooted? ( apart from saving a little battery obviously). Or is it perfectly acceptable to just keep it running if everything's ok?
Is there a way to reload an Android application in the emulator without closing the emulator, saving any code changes, and running the emulator again? If I make even a simple change to the layout, it takes about 30 seconds by time I run it in Eclipse and Android "boots", and I can unlock the emulator to run the application. Is there any way to shorten this time when making changes, or is it something I just have to deal with?
View 3 Replies View RelatedI downloaded the most recent version of Android for linux (android-sdk_r05-linux_86.tgz). I was trying to use the the Android Ant task(s) for packaging, building, and deploying my code. I should mention that I'm running AMD64, but have the 32-bit libraries installed. The Android Ant tasks are all broken.
First, the start-emulator task never gets the emulator running. It does get past starting adb, but then just sits there.
Second, the SDK is missing the aapt binary in the tools directory. So, the example notepad sample application will not even package correctly.
I have all the dependencies configured for Android. I can run it from the command line just fine.I assume the Ant code is out of sync with the recent SDK updates. Can anyone shed some light on this problem? At this point, I'm considering writing my own Python scripts to interact with the Android SDK. Ugh.
I have a Jiayu G3 that won't boot in Android and apparently not in CWM either. I kinda did a lot of "upgrades", here it goes (I just wanted to upgrade it to Jelly Bean).
I originally had 4.0.3 (stock/unrooted) then I rooted it using Binr4y's root method. Then I "installed Jelly Bean" from this video and then it started a boot loop then went on and on so I tried another rom and found this one RAW MOD B3, this one didn't worked either still looped on and on, so I tried finding a fix and came up with this Lewa Recovery 2.0 for JIAYU G3 so I flashed Lewa Recovery image with CWM and now to my surprise I can't even boot to CWM anymore.
I also installed before the Lewa Recovery Flash, White Google Logo.
So now my situation is kinda like this:
- I should have RAW MOD B3.
- I can't boot into Android it loops on and on at the logo.
- I can't boot into CWM either it also loops on and on.
- I don't really know how to boot into TWRP or Lewa.
How to distinguish Android is first run or not after booting device?
View 2 Replies View RelatedI make 'hello world' app :-) and wrote a Log code in onCreate. and then give "android.intent.category.DEFAULT" and "android.intent.category.HOME"
This situation appears emulator(1.5, 2.0, 2.1). but HTC hero(1.5, original htc rom) didn't! it just call one time! Which is normal? and If calling twice is normal, why are they call twice?
So i downloaded advanced task killer and its great. does exactly what i need because the battery on my lg gw620 is pretty poor, but what i want to know is there an app that can turn off the auto booting of apps.
for example when i kill all the apps on my phone, if i do nothing for an hour, and i load it up again in an hour or so there are about 10 apps running (not widgets) so obviously there is a form of auto boot function that loads apps without me asking.
is there an app that can kill the auto booting?
I know that my girlfriend needs and wants a tablet(a simple one) , so I ordered a serioux visiontab s800 which will be shipped today.
I want to setup an app or if possible in another way, to play a certain song when booting the tablet. Or even after it has booted. I just want it to start playing a song all of a sudden If this is possible , I might want to start working on it asap, since I will give the gift on Thursday.
my tablets android system and now it's stuck on the booting screen. What should I do?
View 2 Replies View RelatedI have an el-cheapo chinese 7" tablet with an Allwiner A20 dual core processor, which I bought off eBay (about tablet read "Wing", but that's about all I can remember).
It has a 512mb RAM and 4gb internal storage. I also have a 32gb TF card.
I thought (for some reason) that putting ClockWork Mod on would be a good idea, if I wanted to flash something like Ubuntu Touch, or CyanogenMod.Unfortunately, I hadn't reallised that the version of Clockwork Mod was not appropriate for this device, and booted to recovery.Needless to say, it didn't even make it that far... It'll only go as far as the very first logo, and no further.
Can anybody tell about the Broadcast Receiver in android to make make my service to run when the the phone just finishes the booting.
View 5 Replies View RelatedI'm trying to build my own Froyo images for Nexus one using the source code downloaded from android.git.kernel.org. The platform code is the master branch and the kernel code branch is android-msm-2.6.32. I built the images successfully. However, when I flashed my Nexus one with the images, the system hang at the colorful X screen. My Nexus one's specification and the steps I used to build the images are below. Could you please tell me whether I missed anything during the process? Is there any tool that I can use to hook up with the phone when the phone boots so that I know which part goes wrong?
My nexus one specification: HBOOT-0.33.0012 MICROP_0b15 TOUCH PANEL-SYNT0103 RADIO-4.06.00.12.7
I built the system image and kernel image following the steps below.
1. For platform, at the root for the platform source code: a) . build/envsetup.h b) lunch 4 c) cd device/htc/passion ./extract-files.sh d) make
2. For kernel, at the root for kernel: a) export ARCH=arm b) export CROSS_COMPILE=arm-eabi- c) make msm_defconfig d) make
3. Build platform against kernel, at the root for platform source: a) Copy kernell/arch/arm/boot/zImage to out/target/product/passion/ kernel c) make