I got a new I7500 and wants to experiment with this. I could not get the adb working with this phone. The samsung software does not solve the adb issue. How can I get I7500 detected by Windows Vista as ADB device?
View 1 Replies
I cant get my Galaxy to connect to my PC. I've searched through the posts on this iste and tried everything. Has anyone has the same issues and managed to fix it. I've not upgraded the firmwear as the phone is running AOK and I don't want to mess is up.
View 3 Replies View RelatedNo matter how many times I reinstall the device drivers, they all install correctly besides the Android ADB Device driver.
View 4 Replies View RelatedI'm trying to root my Samsung Galaxy, currently looking at the AndroidWorld EasyRoot rooting guide, and I'm stuck on the initial stages. I've got the SDK downloaded and I'm trying to get ADB working. This involves installing the driver so that USB debugging works...but I can't find the driver anywhere. I'm running Vista x64 Ultimate.
View 3 Replies View RelatedWhen I connect my new Galaxy S to my computer using the usb connection, I can see both the internal and external SD card (I use a sandisk Ultra 16GB card). However I cannot open these disks. Windows refuses to open them. The right click on these disks in order to get their properties gives 0GB! So what is going wrong. Do the SD cards use a special format (linux ?) that windows can not see correctly.
I take chance of this message to give a short feedback of my first week with my galaxy S here in France. I got it from virginmobile operator. I have to say that this phone is amazing. What a screen ! My wife just purchased an iphone 4. By far I prefer the samsung's screen. Concerning the battery. One can go for one or two days without recharging. My feeling is that it is not shorter than the iphone's battery.
After installing the galaxy drivers several times on windows 7 64 bit and after spending a lot of time searching the drivers for this OS, I decided to create a thread with the links to the drivers: for the fastboot (for flashing a new recovery img) and for the adb (for flashing firmware using odin when the phone is in download mode):
The link: MEGAUPLOAD - The leading online storage and file delivery service. I suggest it will be a sticky, since last night I spent 1 hour in the stickies until I found these 2 drivers.
Is it possible to completely clean galaxy and install windows mobile or iphone software?
View 12 Replies View RelatedUp until this morning I've had no problems with running ADB commands from my computer to my phone but now everytime I try to do so I get a Device Not Found error. My OS is XP and I've gone through the Device Manager looking for something that says ADB (that's what my memory tells me I should be seeing). Can anyone tell me where I should be looking? Or what device I may need to update the drivers on? Not sure why it suddenly started happening but it's hosing me on trying the latest GAOSP build (need to mount so that I can delete everything in the dbdata directory).
View 12 Replies View RelatedI got them working at one point, now they don't work, sees the phone like once out of every 10 tries.
View 2 Replies View RelatedOn android-hilfe.de I just found: OpenGl ES Auf dem I7500!! Ja es geht wirklich - Android-Hilfe.de
I tested it and it works - i can run opengl games fluently on my samsung galaxy now.
For those of you who can't read German: you can get opengl hardware acceleration working on the samsung galaxy on II5 and probably any other version by copying the libhgl.so from a htc G1 device.
Unfortunately the only way to legally do this is probably by owning a HTC device, but there are some HTC system/recovery images available for download, from the HTC website. Be sure to download the OTA image as it contains the files directly and you can just copy the libhgl.so file directly.
Root your phone, remount the /system filesystem as read/write, then copy the HTC libhgl.so to /system/lib/libhgl.so . Reboot phone.
Now you'll have openGL hardware acceleration!
Just installed Galaxo 1.6.3.4, everything works great, except that gprs/edge capabilities seem to be switched off? They used to work before the root. I can use wifi, but cannot get any data traffic outside wifi areas.
View 6 Replies View RelatedJust wondering if anyone has any idea about themes with Galaxo 1.6.3? I grabbed a theme from this site (which has a GREAT tutorial by the way), but whenever i try to install one, my phone will not boot following the update. I get a similar thing to if you have not restored GAPPS where the screen will just sit on the boot screen but go no further. I tried restoring GAPPS to see if that was somehow the issue, but not luck.
View 15 Replies View RelatedAnyone else here using Docomo service in India? In the last week or so, my GPRS has been spotty. Actually, it's mostly not working at all, but will sometimes be up for an hour or so. In perhaps related news, I've also been receiving empty messages from 52236 via SMS.
View 1 Replies View RelatedI've been listening music on my Samsung i7500 Galaxy with headset plugged to the device. After listening I've plugged headset out and now while I call to somebody I see there is a call on the device screen, but either me, either person whom I am calling to, doesn't hear the other person. While I plug headset again I can hear everything (on the headset), after another plug out problem still exist.
View 2 Replies View RelatedJust purchase samsung galaxy s its a very nice phone but my mass storage device is not working.
View 2 Replies View RelatedIs there anyone that can help me?
I just purchased a sprint htc evo 4G phone and am trying to tether it to my hp desktop computer; which has windows vista 32 bit.
I downloaded pda.net to my phone okay BUT I am having problems downloading pda.net to my hp desktop with windows vista 32 bit.
I apologize If I am not using all the right words or nomenclature..But I just want to be able to tether my htc evo 4G phone to my hp desktop computer to have internet access.
I have gone to settings - aboutphone - usb settings - mass storage. Now upon connecting to my computer, the phone task bar says connect phone via mounting. So I do this. Usually a drive should be installed and then it should be visible on my computer. But this doesn't happen. How do I get it to work? I don't use kies because it is rubbish and don't need it. I just want to drop and drag music and videos.
View 17 Replies View RelatedHow to Debug on the Samsung Galaxy I7500 Android Phone
CODE:.........
When i followed the above steps system tried to install driver and then prompt following error.
Refence link
http://adrianvintu.com/blogengine/post/How-to-Debug-on-the-Samsung-Galaxy-I7500-Android-Phone.aspx
After installing HTC Sync from the HTC website (v.2.0.4), and connecting my Hero via USB, my Hero cannot find HTC Sync on PC, although it is installed, and I have restarted my PC. After the "Finding HTC Sync on your PC" message, I get an error message saying: "Unable to find HTC Sync on your PC. Please make sure that HTC Sync is installed and opened on your PC [which it is]".
View 10 Replies View RelatedHas anyone else had issues getting windows to recognize the drivers for their phone? I'm in the process of rooting my phone and I can't get fastboot to work with my phone. When I look under device manager on my laptop it says the drivers aren't recognized. I've tried windows vista 64 bit and windows xp 32 bit.
View 2 Replies View RelatedI accidentally put my phone in another language, and in the process reset factory settings. Now, my phone wont connect to the internet. WTF?! What did I do!? My SIM card was in when I did this.
View 1 Replies View RelatedDoes GAOSP Froyo support live wallpapers for i7500? If yes, can you recommend some that seem to run fine without (major) slowdown? I would suspect that the CPU is too slow to run most live wallpapers, but there might be some neat ones that are good to go?
View 5 Replies View RelatedI have done several Nandroid backups during Installation of Froyo Nightly build. complete clean phone, phone with main settings adjusted, phone with applications, etc.
All well and fine, but, unorganized as I am, I don't know anymore which is which. I believe that, If I can see a lsit of the files in each .img file, I could figure it out. How do I look into those files?
The answer to that question, at least for the data.img and system.img files, is a small tool called unyaffs. A compiled binary for windows of this file is available at http://www.megaupload.com/?d=XMGZSYOM
Put the unyaffs.exe and the file.img files in a new folder, open up a terminal window (windows-run-cmd), navigate to the folder where the files are and type: unyaffs file.img.
All the files of the image are than extracted to the folder you are in.
there I am new to this. I would like to find out some information in regards to and update for the samsung galaxy I7500.I live in Australia and it seems the phone cant be updated. Is this true. I have tried on many times to plug my phone into my computer via pc studio.
View 1 Replies View RelatedUntil now, have been using Android SDKs Emulator with the Eclipse plug-in, but recently replaced my non-Android phone to T-Mobile's MyTouch 3G Slide. Today, tried to install the Windows Android USB Driver for the phone. Followed instructions in http://d.android.com/sdk/win-usb.html (USB Driver for Windows Android Developers).
When looking for the driver, Windows gave me a "Could Not Find Driver Software" message. When telling Windows where to search, I pointed it to the SDK directory where the driver resides (¦Android-SDK-windows/ usb_driver). Also tried ¦Android-SDK-windows. Specified use sub- folders" in both tries. I am using Vista 64 bit, and suspect that may be the cause.
The "could not find.." message box from Windows has this information under Details:
Problem Event Name: PnPDriverNotFound Architecture: x64 Hardware Id: USBVID_0BB4&PID_0E03&REV_0100&MI_01 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033
In Windows Device Manager, "Other Devices ==>ADB==> Properties" shows Device type: Other Devices Manufacturer: Unknown Location: 0000.001d.0007.002.000.000.000.000.000 Device Status: This device is not configured correctly. (Code 1). There is no driver selected for the device information set or element
In the sdk's "usb_driver" directory, the "android_winusb.inf" file has several VID's beginning with 0BB..., but does not have one for the one listed above. Nor is there a [ ... ]header entry for the MyTouch 3G Slide (Expresso?)
I suspect this is the reason for the "Driver not found"
Am using the 32 bit version of "Eclipse IDE for Java Developers" downloaded last April. (At that time there were a lot of forum warnings about not using the 64 bit version.)
Today, before trying to install the driver, I uninstalled the Android plug-in from Eclipse and then uninstalled the Android SDK I had installed in April which was at the 2.1 level. I reinstalled the SDK at the 2.2 level taking "all items". Then reinstalled the Eclipse plug- in.
In the "Android SDK and AVD Manager" checked for any updates. There were none (I'd just re-installed, so that makes sense)
Information in this thread looked like a solution:
[url]
When I tried that, got the same message box.
These two threads from 2009 have entries that say the 64 bit driver is in the SDK I cant find it. Could be looking the wrong place though.
[url]
[url]
The android_winusb.inf has these two .CAT entries in it CatalogFile.NTx86 = androidwinusb86.cat CatalogFile.NTamd64 = androidwinusba64.cat
Using the information from the above ¦5512 thread, I added these lines to the [Google.NTx86] group immediately following the ";Google NexusOne" information and before the [Google.NTamd64] entry
CODE:.................................
When that did not make any difference, added: %SingleBootLoaderInterface% = USB_Install, USBVID_0BB4&PID_0FFF which was also part of a post. Made no difference
The .INF has a [ClassInstall32], entry, but there is no [ClassInstall64] entry. I do not know enough about INFs to know if that is needed or not.
I want to wipe the data on the internal SD card but the format command from settings/SD Card is not successful although it appears that it is. Can I format it successfully from Windows?
I am running Galaxo 1.6.3.3
Is there any way to update my Samsung Galaxy i7500 1.6 Donut on Eclair 2.1 or Froyo 2.2? Please give me tutorial or link how to upgrade (without bugs like dont working camera etc.).
View 9 Replies View RelatedI'm trying to flash my new Galaxy using Odin (because I got it sim-free and I don't have the market). I'm doing this on WinXP inside VMWare on Linux, unfortunately. It had only this to say: <1> Added! <1> Detected!
That is, after I filled in the filename and pressed start, the two boxes went yellow and the timer began counting but there was no other output. I killed it after about 45 mins. I've tried this with the II5 (one file) and IH7 (multiple files) firmware versions linked to from this site. Now, I guess the obvious culprit here is VMWare, but it seems odd that it would find the device and then give up (and NPS and mass storage work as well as expected). Also, even if I don't connect the Galaxy to the PC, the only way I can find to leave the 'downloading...' screen is to pull out the battery - is that normal? I did try with native WinXP on an old laptop too, but it's a 7-year-old installation and it wasn't playing ball... so I'm hoping someone here has a suggestion for how to proceed that doesn't involve a fresh Windows install?
i7500 does 1.6 work on this model if so where can i get?
View 3 Replies View RelatedThe mounting and unmounting of the sd card, I read up and Ordered a class 6 verbatum card. But the big Issue is my windows will not recognize the behold 2. When I hook it up it tells me usb device not recognized then inside it says Windows has stopped this device because it has reported problems. (Code 43) Port_#0006.Hub_#0005. I have tried to install the usb drives I found on this site but it will not allow them to install. I have gone in and deleted My upper and lower system file in the registry.
I have bought a new cable < universal> I did not have the OEM cable and Samsung refused to send me one said it was tmobiles responsibility. I have hooked it up to a Vista 32 bit system and nothing. Also when I hook it too the usb it only shows charging no usb notification on the screen. I seem to remember reading it should have a usb symbol on the upper right corner? I have also already set the system setting to usb mass storage.