Im running the 2.3.9 leak, will this update load the new bootloader along with 2.3.15, or is it the leaked 2.3.15? After using this method will I still be able to use the 2.1 sbf? Also if I update to leaked 2.3.15, can I use a 2.3.9 nandroid to go back?
View 19 Replies
Has anyone tried this: [DEODEX] Update.zip deodex - Droid X Releases - AllDroid Public Board - [DEODEX] Update.zip deodex - Droid X Releases - AllDroid Public Board - AllDroid.org > Home
It's an update.zip that will deodex 2.2...I can't get it to run (just stalls out in ClockworkMod Recovery at "Installing Update"), but it appears that a few people have ran it successfully.
I finally got my ota 2.2 rooted. Does anyone know if I can use the previous deodex method or is there a different way on ota? Needs my themes back.
View 49 Replies View RelatedI am on the Froyo OTA and I rooted my phone (can't find the thread I used for that). I then started with titanium backup, got that bootstrapper and did a full backup and then tried to deodex my phone from this link (xUltimate). I kept getting errors on one of the steps and ran their little utility called Test.exe and it said my phone was already deodexed. So I thought maybe that happened when I rooted the phone. I then went to try install a theme that I liked, but I got an error so I had to recover. So I tried another one that was supposed to just make the top bar dark, had to recover. I then installed this one and it worked thought the text on the bar is not white and in the thread someone else had the same issue and was told that their phone is not deodex'd. So I guess my basic question is how can I tell if I am or not?
View 5 Replies View RelatedIm having trouble Deodexing my phone. I have SU access. Here is a screenshot. Can anyone point me in the right direction.
View 11 Replies View RelatedI have about 300 hours of reading in and I am still sitting with a Droid X, 2.2 OTA and no root. I know how to root with rootmyx2 1-click method, not an issue. Was rooted before 2.2 and didn't want any leaked versions.
I have every tool that I would ever need. Root Explorer, Titanium BU, ROM Manager and Droid X Recovery Bootstrap.
But I can't get a straight answer for what ROM's I can install with the 2.2 OTA and which ones deodex for me. I know the 928DroidBlackGlassX-DroidX-OTA2315-DeOdexEERR-THEME will deodex for you but from what I read you have to have a ROM first. So confused.
I read FlyX has been put on the 2.2 w/out deodex and others say you need it first.
I'm just looking for the easiest step-by-step instructions to get set up for themes on a DX 2.2 Official 2.2 OTA.
I've successfully done most of the steps to manually deodex. However, when I get to the last step, it says Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSteven>adb shell
'adb' is not recognized as an internal or external command,
operable program or batch file.
This is what the last step says to do: (and I get stopped with the above message)
Open a command prompt, and do the following:
Code:
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
I've tried the Droid-X Clockwork Recovery, Deodexed Rooted, Froyo'd method a few times now and each time when I reboot after restore my phone just sits on the Motorola screen. I've installed the file into a folder in clockworkmod/backup Did a backup with recovery and restore with the folder I made
View 7 Replies View RelatedThis is a guide on manually deodexing, you phone. The reason I am making this tutorial is because I could not get my theme to work with Teenfaces deodexed android. You may want to follows this if you have the same probalem as me, or if you just want to take a shot at doing it.
What you'll need:
A Windows based machine
xUltimate v2.2
Patience
Process:
Unzip xUltimate v2.2, and launch "Main.exe"
If everything goes well you xUlt should recognize the phone and make a connection. You now should see a list of options.
Run option 1. After option 1 is done, run option 2.
Now these well take a while. Run option 3.
IMPORTANT: After you have run option 3, you MUST navigate to the xUltimate folder and find "origi_frame" folder, and delete "guava.odex". It's a bad file, and interferes with deodexing process.
Now run option 4, and wait.
Exit xUltimate, and put the phone in USB mass storage.
Go back into the xUltimate folder and copy "done_frame", and "done_app", and move them to the root of the sdcard.
Open a command prompt, and do the following:
Code:
...and decide to run another theme after, will I still be deodexed?
View 3 Replies View RelatedJust got my Droid X on Wednesday. So I initially tried rooting the manual way (How to get 2.2, Rooted, on your Droid X - Droid X Rooting - AllDroid Public Board - How to get 2.2, Rooted, on your Droid X - Droid X Rooting - AllDroid Public Board - Forum), ran into some trouble. Later found that it may have been due to some Moto driver issues. Was finally able to get the correct Moto drivers in by turning off debugging, plugging in as USB Mass Storage, and then it updated MotoConnect to a version that's apparently not available online.
Anyway, I rooted using the one-click root (DroidXRoot), was able to download wireless tethering which never actually worked. The program runs but it says "Unable to start tether". Don't know if this is related. So I'm trying to get clockwork mod, and I'm trying to deodex. I attempted to Deodex using xUltimate v2.2 and this link ([HOW-TO] Manually deodex your phone.), all ended up working, but when I got to the part where I have to enter the cmd lines, I failed. I run adb shell and it brings up a $ and then i type su and it says Permission Denied. Can't figure it out.
I've also tried installing clockwork through ROMManager, I hit Flash ClockworkMod Recovery, hit Droid X, and it says successfully downloaded ClockworkMod recovery. If i lick reboot into recovery it asks if i'm sure, I say yes, and nothing happens. I've also downloaded the file and placed it on tnhe root of my SD Card but I can't figure out any way to actually install it.
I thought I'd go back and start from scratch 2.1 now that all my drivers are in-line, but of course G** D*** Motorola brought down all the sbfs with their C&D. I've manually installed the Android SDK, I honestly don't even know WHAT I've done now, the files on my desktop that I've used consist of usbdeview, xultimate, DroidXRoot_v2, USB_Drivers, recovery-clockwork, update.zip, MotorolaConsumerDriver MotoConnect Installer, I've edited the PATH under my computer settings, I'm completely lost now. I just want to be able to run some themes! My initial goal was to deodex, and then it turned into this massive pile of ****.
I was thinking if I can get deodexed and clockwork mod recvoery working I probably will have solved any other problems in the process, and figure wireless tethering would prbably be included in that. Anyone have any idea AT ALL where I should go from here?
currently on RubiX focused. say i wanted to return back to stock like 2.3.15 deodexed or even odexed. would i reboot into recovery, clear data, cashe, system, mount then apply the zip? just want to make sure this is right so i dont brick again
View 6 Replies View RelatedDroid X - 2.2 - Rooted
Attempting to deodex, followed the instructions exactly on this thread ([HOW-TO] Manually deodex your phone.) but on my last step when entering "mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system" I get the following response from cmd prompt, "mount: Device or resource busy"
The OP said I should try placing the phone in Windows Sync mode or whatever it's called, as opposed to USB Mass Storage, just tried that and again, same message.
If no ideas how to fix this, does anyone at least know what to do so that when I reboot I won't have to do a Nandroid restore? It's getting really annoying going on the 3rd or 4th time.
just did it real simple, i am now rooted but the big question is how do i deodex my phone? do i need to use a computer or can i do it without like how i rooted? im using a mac so the instructions posted are for using windows computers.
View 4 Replies View RelatedDroid X - 2.2 - Rooted
Attempting to deodex, followed the instructions exactly on this thread ([HOW-TO] Manually deodex your phone.) but on my last step when entering "mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system" I get the following response from cmd prompt, "mount: Device or resource busy"
The OP said I should try placing the phone in Charge Only mode or whatever it's called, as opposed to USB Mass Storage, just tried that and again, same message.
If no ideas how to fix this, does anyone at least know what to do so that when I reboot I won't have to do a Nandroid restore? It's getting really annoying going on the 3rd or 4th time.
I updated to the new Froyo leak and lost root (I assume)
-I cannot reboot Bootstrap
-Root Explorer and Barnacle do not work
-I still have the Superuser app, but it does not seem to be working
If I am correct that I lost root, I would like to try the Droid2 method
I have downloaded the SDK and the Moto drivers. I am in PC Mode with USB debugging enabled
My problem is when I get to this line C:android-sdk-window ools> and try adb devices, it says List of devices attached.
That is it. Nothing seems to be attached. If anyone can figure out what I am doing wrong I would greatly appreciate it. I know I shouldn't be the first to jump on new roms and leaks, but you have to learn sometime right?
Anyone used THIS method for the OTA? I used Androot for 2.1 and am just curious if I can simply unroot, do the OTA, then use this method to root again. Suggestions?
View 1 Replies View RelatedIf this has been asked I cannot find it. What is the easiest, quickest method for root right now? There seems to be a new method being developed every week. I know there are basebands available to load that will help with the signal issues. Are there fixes with root that will resolve the audio issue with Pandora?
View 8 Replies View RelatedIs there one method that better then the other when installing a rom that has the choice of both? and with update.zip method could you still wipe your data before hand to start clean?
View 7 Replies View RelatedI've been quietly lurking around, enjoying my simple 2.2 leak Droid X. But, I've always known that eventually I want to root it and install ROMs and themes and whatnot. The problem is, I don't know the correct sequence of hacks/mods to get to my desired end product. I also don't know what the current best method is for accomplishing each part of the sequence. My desired end product would be something like a rooted Droid X with Vanilla Froyo and flyX and whatever other speed tweaks are available. I'd also like to keep my apps and settings that I have now, if that's possible. What I'm asking for is a simple list of things to do to get to that end product. I don't need the detail of how to do each one, I can figure that out myself (of course, if you want to provide links, that's be appreciated too).
View 2 Replies View RelatedI was thinking about rooting with the droid 2 method. After that I'm unclear what is the safest method.
1. Run Titanium backup
2. Koush's bootstrap recovery
3. install rom manager
4. flash a theme (which is the main reason i want root)
Is that my safest, most recoverable (is that a word) method? Or what should i do after root to be the most safe from bricking my phone?
I have searched the Android store, and also searched these forums but maybe some more advanced Droid users can help me find an answer.
As with the iphone, inputting a new phone number within seconds is rather difficult on the Droid. That got me wondering if there were any third party apps or at least a way through the device OS that will let me quickly add a new contact. So far as I can tell the quickest way is to hit Phone--> input # --->option key---> add to contacts ---> Create new contact. That is 6 steps just to take someone's number! There's got to be a better way.
I just purchased Touchdown by Nitrodesk (incredible app) and was curious how to get the Droid to stop syncing my emails, etc. through their own method? Please be specific with step-by-step instructions of how to disable my corporate account. I only want to have emails going into the "email" folder that are from my personal email moving forward.
View 6 Replies View RelatedI have a non-rooted Motorola Droid running 2.2 and I want to root to try out a ROM. I want to make sure I do this right. I don't want to lose any data (pictures, texts, etc) and I don't want to lose any apps. I've read a bunch of threads and it sounds like this is the general order I should proceed in:
1 - Backup data with MyBackupPro
2 - Root
3 - Backup apps with Titanium Backup
4 - Install ROM
Is this correct? Am I missing anything? Will the root method or ROM make a difference in terms of the process?
what is this? I know that most applications have an APK and an ODEX file, but what does it mean when a ROM has been DEODEXED?
View 3 Replies View Relatedi try to deodex it with xUltimate but it return error all the time
View 8 Replies View RelatedNew to the ROM development. I tried deodexing the Stock Amaze ROM 4.0.3 with Sense 3.6. I updated baksmali and smali to 1.3.3. DsiXDA kitchen wasn't able to deodex it. I used xUlimate and still nothing.
View 1 Replies View RelatedI want deodexed my rom JB Xperia ion without PC...
How I can ?
I'm trying to override the onBackPressed() method of the ActivityGroup class:
public class MyClass extends ActivityGroup {
@Override
public void onBackPressed() {
// do something
return;
}
but I'm getting the error The method onBackPressed() of type MyClass must override a superclass method. I'm relatively new to Java, I've seen here that people do it and it works for them Why I'm getting this error? I'm writing an app for android 1.5, could the problem be here?
In Eclipse, when I mouse hover over a built-in method, it displays a method definition including stuff like what the method does, input objects, return objects etc. If I have a yellow line (warning) under the method I'm trying to use, I can't get the mouse-over to show the definition. If I try hitting F3, I get a "The Jar of this class file belongs to container "Android 1.6" How do I show the definition of the method I am using when there is a warning?
View 1 Replies View Related