My phone is opening in my jacket pocket. Anyone else have this problem? I can hold the back and give the phone a MILD shake and the slider completely opens. Also if I push on the Magnifying Glass while the phone is closed, the phone has quite a bit of downward travel, but the other three corners dont...this happening to anyone else?
View 2 Replies
These are mostly minor things, but it's only been a month. To be honest, I think the BodyGlove that I had on the phone for the first couple of months slightly distorted parts of the phone.
Why do I say that?
One, I have another thread about this, but the plastic edge that runs around the keyboard portion of the slider (it's like a rubber bumper, it runs over the USB port and around the rest of the phone) is a bit loose where the USB port is. Also, the screen seems a bit loose when the slider is closer. I can move the screen slightly side to side (don't know how to describe it), as if it's not quite locked into place.
I don't remember these being issues when I first got the phone, but I attached the BodyGlove about 2 hours after I got it so I really have no idea. But the slider fits together so tightly that I think the clasps that held the BodyGlove on the phone may have causes the phone to adjust slightly and now that I'm not using the BodyGlove any more that adjustment is causing looseness.
Should i keep the droid 2 or wait to get the htc slider with red keyboard?
View 2 Replies View RelatedMaybe it's just me but using the slider everytime you use your phone seems rediculous. I downloaded an app that allows you to disable the lock so now when I press the home button my screen pops up and is ready to use. Once the screen goes to black it is basically locked until you press the home key again. Granted I don't use any password protection and don't have sensitive data on my phone so why use the slider?
View 5 Replies View Relatedhow do you move the default unlock slider to another position on the screen? it seems i moved it towards the bottom, and now i can't figure out how to move it for the life of me.
View 2 Replies View RelatedI just rooted my phone today, and tried using "SetCPU". I can't get the max slider to go over 550mhz. Any idea on whats going on?
View 2 Replies View RelatedAbout 25% of the time my phone will ring and I go to swipe the lock to answer the call and I get no response from the slider. If and when it does decide to slide the call has already gone to voicemail. And if I turn the slide screen off in settings and the phone rings, tapping the "answer call" button does nothing (again, not all of the time).
I just tried to duplicate it calling my DX from my workphone and it slides fine and answers the call. Anyone have any ideas what might be causing the slider to not slide some of the time? Other than with answering the phone I've had no problems with the touch-screen.
So I noticed some (protective) plastic on the back of the sliding screen today. I gave it a little flick to see if it was meant to stay, but it peeled right off. Seems to be part of the plastic films put on before shipping. Can't believe I haven't seen this in over 2 months (of course I rarely slide it open).Sliding mechanism is much smoother now and certainly not loose.It has also opened up a whole new Droid Feature: It is so shiny and reflective on the back of the slider now, if you get lost in the woods and are out of cel reception, you can use the back of the slider to reflect the sun and signal the rescue plane while still playing your favorite game to pass the time Droid does Survival tool!
View 30 Replies View RelatedI can't find the option to disable the lockscreen slider?
Under Location & Security settings, "set up screen lock", I select the option for "none" but it doesn't disable the slider.
I would like the phone to go to the homescreen immediately after pressing the power button.
Anything I am missing?
I have a Droid and it has worked perfect answering calls, until now. I just installed LauncherPro and now when I receive incoming calls I can no longer slide and answer calls. No matter what I do, the screen will do nothing other than show incoming calls and the slider, but the slider will not slide.
Is there anyway to answer phone calls (other than auto answer) without using the slider?
I just learned about this app in THIS THREAD, and I really like the concept.The problem is that I can't get another slider to save to WidgetLocker custom unlock screen.I long-press the screen, tap on Widgets, tap Custom Slider, adjust the settings and tap on Save.But then the new slider never appears.I can add any other widget, no problem just not a custom slider.PLEASE do not hijack this thread with the pros and cons of using a lock-pattern.I've had a cell phone since 1992, and have never lost a cell phone.I'm not about to lose my precious DROID.
View 5 Replies View RelatedI'm wondering how I can choose to wake up my phone without having to do the slider everytime or at all.I work at my home office 12 hours a day and my phone is on my desk always.I use it alot and put it down, then use it some more and back down again.I'd like to conserve battery and not set it to just "screen stay" aka never timeout because that just uses so much battery with the screen on.And using that slider over and over and over well you get the point.So how can I just set it to wake up on like touching the screen or something?
View 7 Replies View RelatedHow can I type a question mark from the slider keyboard? I can find it on the virtual keyboard, but not the slider keyboard.
View 9 Replies View Relatedis there any way to further decrease brightness levels other than the manual bar slider or auto brightness? I want the screen to go about half of its lowest setting. I use the phone a lot in near total darkness and its to friggin bright!
View 12 Replies View RelatedI'd like to set the sound slider on the lock screen of my Droid to make my phone set to vibrate instead of fully silent. Is there a way to do this?
View 1 Replies View RelatedInstead of sliding across to unlock the phone. You can use one finger to hold the green icon, then you'll notice a little green icon on the other side of the screen (where the sound off icon usually is, it disappears when you hold the unlock icon). Then just tap that one too and it unlocks.
View 19 Replies View Related1. after taking a picture, and clicking on the thumbnail to view it, have the phone let you view it in portrait, not landscape only.
2. on board image resizing, the 5, 3 and 2mp options dont cut it. let us choose 640x480(all MP's), 800X600(all MPs) 1024x768, etc..
3. when in camera settings, when you click back to get back to the options it closes the whole settings slider. which is annoying.
What apps are there in which you can change the "home slider" when you unlock your phone. My default gray bar with the time and "verizon wireless" on it is not so easy going on the eyes, i wish to change that look.
View 23 Replies View RelatedI have tried to ask this question in several threads, with no avail so I figure I make my own thread for it.
I would like the 2.0 slider on Bugless Beast, but can't find the instructions for it. I know they have the link on the Bugless Beast alldroid thread, but I dont know what to do with "-Patcher 2.0 Lock Screen with Vibrate Tweak". Should I run the file "update.zip" as reboot recovery over the rom?
In the iPhone or Android, if you have a JQuery Slider, it doesn't quite work (touchscreen will move the screen instead of drag the slider.)
View 4 Replies View RelatedI want my preference menu to have something to change the duration of a vibration.There is not an slider tag for prefs.xml, so which is the best way to do this?
View 1 Replies View RelatedI have seen other phones where people have iphone like or other types of unlock sliders. Can you change this w/out being rooted? If so, where do you find them?
View 24 Replies View RelatedHere is the image to visualize it.
View image: prototype
I want this to be extracting the information from an .xml file. Something looking like:
cat, a small domestic animal, cat.png, cat.mp3
dog, a medium domestic animal, dog.png, dog.mp3
cow, a big domestic animal, cow.png, cow.mp3
I want the image to be clickable, once clicked an audio will play. The audio and image name will always be similar to the name of the object (cat, will be always cat.mp3) .
In Cyanogen Mod settings under lockscreen, my brother disabled the slide to unlock feature, so when I try to unlock the phone I see the lockscreen, but there is no type of slider at all on the lockscreen. Is there anyway to bypass the lockscreen without having to do a factory reset/data wipe?
View 5 Replies View RelatedIt would be so nice to be able to lock the key board in place wouldn't it? I'm sure it could be done even if they just used some sort of pressure lock where you would have to push down slightly on the screen then slide it back. I can't imagine why they don't do this.
View 13 Replies View RelatedMy phone unlocks with a slider from left to right (Acer Liquid E 1, Android 2.1), but I would like the vertical slider that my son's have on their HTC Magic phones. (Android 1.6 I believe).
Is there any way of doing this? Their phones are so much easier to unlock, and there are times I go to answer the phone and the side slider just messes things up.
I am looking for a class that implement a horizontal slider bar like the one on the "lock" screen. In other words, user must slide the bar from left to right to run an activity.
View 2 Replies View Relatedway to get an always present brightness slider on the notification bar of my Htc one x just as the one on touchwiz for s3 and s4. but without rooting!
View 3 Replies View RelatedI currently run a Epic 4g on sprint.I am switching to a Sidekick 4g on tmobile.On both of these devices iv always wanted an app to run a service in the background that would turn the screen off on the closing of the slider. So that to unlock the phone I press the slider open, then when I close the slider the phone turns the screen off and locks.
How to write the app? It needs no UI, no anything.When slider goes from open to close, screen off. By slider i mean the slide out keyboard.
The one thing that does not make sense is why do you have to do the unlock and then the draw pattern. Shouldn't the draw patter be enough? I tried the no lock widget but it turns of both the slider and the draw pattern. I just want the draw pattern.
View 7 Replies View Related