I did a full wipe, including cache, and got stuck in a boot loop. I pulled the battery, and when I hold down the volume and power button to boot into recovery so I can restore, the phone vibrates three times very quickly, then nothing. I can turn it on and go into boot loop, but that's it.
View 3 Replies
ok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
I followed that totally guide to rooting and i want to do the boot screen that it shows but i dont see the adk recovery option when i boot my phone into recovery? i did the sdk think like it said but maybe it didnt work?
View 3 Replies View RelatedI was running Virtuous 2.6 and I decided to run some tests with task killers/force closing apps, etc and wanted to get back to the stock 2.1. I downgraded to 2.1 just fine, installed the May OTA update, and went to install 2.2 with the PB31IMG.zip file. Instead of the bootloader giving me the option to update, it simply says 'parsing' for about 2 seconds and then goes back to the HBoot menu.
Now when I reboot the phone, it will only boot into recovery and nothing else. I put the 2.1 downgrade back on to the sdcard and tried updating again and it just says 'parsing' and doesn't work.
Bootscreen & Recovery Console...
View 1 Replies View RelatedI was messing around with root explorer and noticed that i was able to delete my boot animation with it when i was mounted as R/W so i thought i would try to copy one and it also works... so no need to push with adb shell.. here are the steps
1. take the boot animation make sure it is named bootanimation.zip and copy it to your SD card
2. then open root explore and mount R/W and then navigate to the file and press on file till the menu comes up and select copy
3. then navigate to data/local and paste the file in the local directory
and you are done, this can be done with the android_audio.mp3 file as well just paste it to the same place.
just thought this would make it easier for people instead of using adb shell
root explorer:
http://www.appbrain.com/app/com.speedsoftware.explorer
I just tried to install an custom rom at my Android, i unlocked it on HTCdev`s site, but i think i was a little fast with the DooMLoRD_v2_ROOT-zergRush-busybox-su.zip
I then bootet the phone into fastboot, and did the command fastboot flash boot boot.img, this worked very fine but now the phone wont boot.
I think maybe the phone is unlocked, but it is S-ON. I have tried diffrent recovery modes with the fastboot flash recovery recovery.img etc, but none of them are working.
Now im sitting with a phone that wont boot at all, what to do?
Is it possible to keep going on with the custom rom install, or can i resett the phone into the stock rom?
My phone won't boot into recovery. Will they give me a new phone for this. Or will they get suspicious?
View 6 Replies View RelatedAfter trying out ROM manager my phone WILL NOT boot into recovery mode. What do I do?
View 8 Replies View RelatedI've been trying to track down a solution to my problem, but every solution seems to contain a "Boot into recovery mode" line which I cannot do. I attempted to update a rom that I had installed, and now I am stuck at the google logo with the unlock icon. I cannot boot into recovery with the volume keys and power, and now I cannot figure out how to use adb to recover the phone, as it cannot recognize it.
Is there anyway I can access this phone while it is in this state from my computer and recover it somehow. I tried following leads that people have posted in other threads, but it seems like most suggestions involve "Use adb", yet every adb tutorial involves the phone being in recovery mode. I've tried to uninstall and reinstall drivers via Wug's Toolkit, but when I plug my phone in, I am not able to install the drivers properly. I try to run adb items through the console, yet it does not recognize my device.
Is there anyway to install the necessary software I need and recover my phone while I cannot get past the google logo screen?
I am using a verizon galaxy nexus
My phone is not opening but I can still go to DOWNLOAD MODE
Solution I tried: I flash a stock firmware thru Odin and still it boots loop.
Maybe I can fix this problem of mine when I go to recovery mode, but how can I enter CWM recovery mode?
Phone Model: GT-S5570
I've been reading and I've downloaded the ROM Manager from the Marketplace. I've also downloaded a ROM to install. I have tried to boot my phone into recovery mode (pressing X while powering back on) and all I get to is a screen with the exclamation mark and a phone under it.
View 4 Replies View RelatedSo I have a Samsung Galaxy Ace 2 X (GT-7560M) and basically I tried to flash CM11 on it, and when after the reboot, the phone was stuck in a boot loop and I can not access nor the Recovery mode nor the Download mode. I did try a USB jig and still no luck.
View 3 Replies View RelatedPhone stuck on 'GT-S7650M' and won't boot into recovery mode?
View 7 Replies View RelatedI try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
I tried installing Tranquility and must have screwed something up because now my phone won't boot past the Motorola Logo. It's been sitting here like this for about 15min and I can't even boot into recovery by holding the power and home buttons. I don't know what else to do now. Idk if my phone is bricked but even if it is don't I need the SBF file to unbrick it and I can't find that file any where. I did a nand backup or whatever before doing any of this so hopefully that can help me. What should I do now?
View 9 Replies View RelatedI reflashed back to stock recovery to try a different rom and now I can't seem to boot into recovery. I was using velocity 0.2 with the JIT OC kernel and rom manager using the clockwork mod recovery. after flashing back to VS740ZV6_01 and rerooting and reapplying the clockwork mod recovery I cant seem to load any new roms or backups because the phone hangs at lg screen on reboot. have to pull the battery and it will then reboot normally but no recovery. also trying to hard reset results in hanging at lg screen. in addition, market app is missing.
View 4 Replies View RelatedI have a new ace 3 LTE S7275R. I tried installing CWM recovery found here: URL....I tried with odin 3.07 and 1.85Every time, odin shows success, but when trying to boot into recovery, the phone gets stuck at "recovery booting...."The phone is otherwise working...getting CWM to work? how can I return to stock recovery at least?
View 4 Replies View RelatedSo I just got my S4 rooted and everything seems correct. I then installed Rom Manager so I could start demoing some of the ROMs out there. Went through all the steps to flash Rom manager as the recovery but I cannot get my recovery to go to CWM, it just keeps going to the stock android recovery. I have googled the crap out of this and am coming up with nothing. in fact I have written several android apps but this just does not work.
My device is a Verizon Samsung S4 model SCH-I545 running android version 4.2.2 Kernal: 3.3.0-690088se.infra@S0210-13#1
My Droid will not boot into recovery,what do I do?
View 3 Replies View RelatedMy Motorola Droid will no longer boot into recovery. the last time I was able to access it was when I rooted. Please help. I have tried the recovery console command in adb shell. It did not change anything.
View 1 Replies View Relatedso this may be a dumb question, but how do i update the boot loader or recovery. I'm using clockwork, and m assuming there's probably been an update for it. ive read about amon ra or something? sorry if I'm incorrect. I am just not sure if my phone is wiping dalvik correctly.
View 31 Replies View RelatedI got one of the new vibrants that won't boot into recovery. Only the batches before august allow you to getting into recovery by holding vol up and down. I confirmed with t mobile that this a true statement, so i need another way in but cant figures it out i tried adb but it wont work either.
View 2 Replies View RelatedI have the Hero, I am using Cyanogenmod rom (6.0).I wanted to flash the newest update (6.1), but when I try to boot into recovery mode it freezes on the black screen that just has HTC on it.my phone loads just fine, it's just with the recovery mode that it gets stuck. What can I do?
View 1 Replies View RelatedI successfully rooted my eris several months ago and am now trying to root for a friend but cannot get her eris to boot into recovery. I've tried several root methods and I know I'm using the correct buttons in the correct order to access recovery.
View 32 Replies View RelatedI'm using ROM manager to flash new roms onto my ally. anything I click on (Reboot in Recovery, Install from SD Card etc) they just reboot my phone.
View 1 Replies View Relatedi wanted to upgrade my galaxy s2 g i9100 and since that time i hve not been able to use the phone again.
i tried rooting it but after that i can not boot recovery anymore all that comes on the screen is SAMSUNG GALAXY SII with a yellow triangle.even if i press the up volume key+home key+power nothing happens.
I have a Karbonn A6 phone given to me by my friend because it was locked. It's asking for gmail user/pass but he doesn't have it. I tried to boot into recovery mode using Power+Volume Up button but all I get is a white triangle with an exclamation mark in it. I can't seem to go beyond that. USB debugging was perhaps not enabled unless it was enabled by default. There is no camera button, only power and Volume Up/Down. What do I do?
I just need to get this phone working somehow. Is there a way to use a computer and a USB cable to get it running?
I have tried using rom manager, holding the power button and selecting reboot recorvery, and by holding the power button and x. Each way I see the white m twice then the phone just boots up. I am running cm7 7.0.3. I have only had the phone for a week, I am trying to wait for the vigor. It worked fine Friday when I flashed cm7
View 4 Replies View RelatedI'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.