HTC : Hero Survived Washing Machine / Battery - SD Card Not Working
Jan 2, 2010
I thought I would let you know how my Hero survived the washing machine. The waranty is obviously invalidated and there are a few scratches to the paintwork on the top corners where it bounced against the drum but everything is working fine including battery and SD card.
The washing machine was about 20 minutes into the cycle when I realised my mistake, I turned the machine off and grabbed the soaking Hero. The back, memory card, sim card were immediately removed and all were placed on a radiator. I found that condensation was forming in various places under the Hero's display so it was turned and put in numerous positions over the next few days until the condensation had gone.
I left everything on the radiator for the next 5 days (hero face down) and finally re-assmebled the device, plugged it in and it's alive I have read other methods for drying a water damaged phone on the interweb including rice and silica gel, I am not saying that this method is better than any other but drying on the radiator worked for me. My phone was not insured so fortunately this has not turned into the costly mistake I had first feared.
View 20 Replies
May 13, 2010
I'm in need of some advise. I love my incredible. But... I keep it in my front pocket all the time. Not a problem for most people but i work in a machine shop. I have uniforms and they tend to get tiny steel shavings in the pockets. The incredible likes to clean the shavings from my pockets with the ear piece and external speaker.
I think I have figured out a way to take care of the external speaker with some sort of thin cloth between the speaker and back cover. But I'm not sure how to fix the problem with the ear piece. I hate to put a piece of tape or something on the face of a phone. I'm going to try some sort of thin sleve to slide it in before I put it in my pocket @ work.
View 7 Replies
View Related
Mar 11, 2010
Please tell me someone is working on a port of The Incredible Machine. This was one of my favorite games. Anyone have any ideas?
View 3 Replies
View Related
Jul 28, 2010
I just got X10 with Android. Unlike the blackberry that I used to own I cannot access the microSD card from my linux machine. It detects it but does not open it for file transfers. I replaced the microSD card with the one I had in Blackberry and the phone accepetd it and was able to find all the media files on it. However the linux desktop (Fedora 12) still could not access it. Note this is the same SD card that I used in BB and all the files there were transferred using this linux machine before. Is it something in SE X10 that is blocking this.
View 10 Replies
View Related
May 7, 2010
Dropped my phone from about 6 feet today. And it was absolutely fine. It landed right on a tile floor too. I have a Verizon silicon-gloss case and a Zagg screen protector. Wrap your phone up and it should be fine, mine survived a pretty damn bad fall if you ask me.
View 5 Replies
View Related
Oct 24, 2009
So I applied the fix for the battery life in the other thread posted here last week. Using chompsms, my battery life has improved significantly. However, the fix stopped working today.
I am not using messages and am using chompsms. However, by noon today, my battery life was at 50%, whereas normally it's at 80.
Now the weird thing is, the uptime of the phone is still very low (15%ish). However, using spare parts--> battery usage --> partial wake usage, I found that the Dialer was using an incredible amount of battery -the exact same phenomoneon in the original issue. So, it seems that the fix has stopped working and battery life is low again, but the phone still recognizes the phone as going into standby.
View 4 Replies
View Related
Dec 24, 2009
Hey for anyone that needs a good memory card for their phone for music or whatever. I found a deal on a kingston class 4 8gb microsdhc for $16.95 with free shipping and no tax for most:
Kingston 8GB microSDHC Card - (Class 4) - SDC4/8GB - Buy.com
View 5 Replies
View Related
Jan 12, 2010
I'm trying to drain my battery it was at 7% I rebooted my phone cuz i know that kills battery but when it rebooted it said the battery is 13% now what gives why'd it do that.
View 4 Replies
View Related
Oct 8, 2010
So i just got my fascinate and my battery life is bad compared to my droid x. I'm rooted but when i try set cpu my phone freeze up and a battery pull has to be done. usually i have to charge my phone halfway through the day.. so is there any tips to help me out?
View 11 Replies
View Related
Jul 20, 2010
Kind of a strange issue, and I'm not sure if this is an Evo issue, android issue, or if I have a weird SD card. On my SD card, when I put my music on, it takes up 5GB, but it doesn't take up nearly as much space on my iPod Touch? Is this due to the way iTunes pulls songs from CDs (where most of my music comes from)? Or am I doing something wrong?
View 1 Replies
View Related
Feb 3, 2013
I have tried boosting sd card & it boosts till i reboot ...after i reboot it gets d same way...i have checked apply on boot...also what is d highest till which i can boost...without damaging it...
GT-S5360
View 2 Replies
View Related
Feb 4, 2013
I was in the middle of crossing files over to it from my computer, and then it froze and stop crossing over files, and crashed my computer, so I unplugged it and restarted my computer and it hasn't worked since. I did have some problems with my computer telling me that the card was only 530kb, so I stuck it in my phone and formatted it, and it was working and then that happened. I really don't want to have to buy another 32gb SD card.
View 1 Replies
View Related
Nov 24, 2010
With the latest SDK release, and the ability to download separate platforms releases into the SDK, the hardware resources required to develop for Android have increased significantly. Assuming that the developer targets all currently available seven platforms - that could take your dev machine to its knees. Taken alone the 'Android SDK Content Loader' takes nearly two minutes on a dual-core machine with 2GB memory.
As the title suggest the reason for creating this wiki is for everyone to list their development hardware configurations, and thus determine what is a well-suited machine for Android development.
The secondary reason for the wiki is that I'm trying to get my employer to provide me with a decent machine for development as I'm currently forced to work on a nearly 4 year old randomly-built machine, and expected to deliver great results. However, the reality is that my system keeps running out of memory, and I can hardly get a chance to write a few lines of code in between the numerous crashes.
View 6 Replies
View Related
Sep 14, 2010
I've had the Evo since the release day and I loved it, greatest phone ever in my opinion. Well about two weeks ago, something happened and it broke, yeah it was my fault but i'd rather not talk about it. So I decided to upgrade to the Epic 4G, I found one and bought one last week. I immediately fell in love with that phone. Now here's the worst part, the same day I buy the phone it breaks. I accidentally dropped it from a height of around 1 feet onto my sink. The inner screen shatters but the outside glass is perfectly fine. I couldn't believe it. I believe that the new Super AMOLED screen is very fragile because I've dropped the Evo hundreds of times and nothing ever happened. I then decided to switch back to the Evo and ordered a replacement phone after a difficult process. Yesterday, I received the replacement Evo. Well I immediately notice it's refurbished and it doesn't seem to bother me. It turns on fine the first time and I proceed to activate it. First, the touch screen is not working at all. Only a few sections of the screen work even after full resets and calibrations. The phone then dies and never turns on ever again, I've tried different batteries and chargers but no luck.
View 15 Replies
View Related
Oct 3, 2010
I just (within the past couple of days) noticed that my Battery Mode doesn't seem to be working. When I go into Battery Manager to select the Battery Mode, none of the selections highlight when I try to select them. I had been using Power Saver mode but it looks like all the buttons are grayed out. Anyone else notice this or have the same issue? I powered down and did a battery pull, but that didn't fix the problem. I don't want to do a reset because it's not that big of a deal to me but it would be nice to get it fixed.
View 1 Replies
View Related
Apr 5, 2014
At a sudden point my device battery settings are not working. I can still enter in the battery menu and see it, but I can't change anything. Can this be a side effect of rooting the device?
View 7 Replies
View Related
Oct 18, 2010
I'm hoping someone can help me with what I assume is a simple query! I recently purchased an Xperia X10 and have inserted my Sim from my old W995. Whilst I'm prompted for my Sim pin number (which works), I can't get any of my contact details. In the phone book - I keep getting the following message -> My number: SIM card unavailable.
View 5 Replies
View Related
Sep 3, 2010
SD Card not working when connect to PC? it normal or some setting needed...?
View 2 Replies
View Related
May 27, 2013
I have Huawei u8600 sonic rooted and with Cyanogen 9 ROM for this phone. Everything is working fine, but I noticed that sometimes my phone just doesn't find SD card. After reboot it works fine again for a while, but after an hour or two it happens again. There is no message about SD card being removed or something, it just disappears. I have most of my apps moved to SD card, so this really annoys me, because without SD card I can't use most of my phone's programs.
View 1 Replies
View Related
May 15, 2012
I bought a Sandisk 16 gb micro sd card for my ICS tablet (Micromax Funbook) and inserted it. I go to settings > Storage And it is visible there. But whenever i install/move my apps to sd card it gets to internal sd card not external i.e 16 gb and my memory fills up ...
View 5 Replies
View Related
Sep 28, 2013
I have a problem, I have a > Androd tablet coby mid 8048, I had inserted a mini external 4GB SD Which contained photographs and I could see them from the gallery normally
Also take photographs and make downloads ....... but after I tried to made a root and instal google play from the external sd mode, it works just fine. it was installed correctly, but after a moments the external sd stoped working,when i went to the library / images tells me not Sd card is mounted, I can not download files or take photographs, I can only explore its contents from LOCAL / exsdcard. there I See everything.
the funny thing is that when you turn the tablet off and back on, it tell the message that says "preparing sd-mount" then says "sd card Mounted "and sd icon appears in the bottom right ..... but not mount on the gallery. I go to settings / internal storage and SD appears but not USB internal storage sda. ,i try to disable the storage to remove safely, turn off The device and try again, but does not work , i all ready try to restore from fabric but nothing only personal data erase and some games.... but the google play still apear instaled that was not there when i buy it, so i think something has change.... what can I do?
View 3 Replies
View Related
Aug 26, 2010
I need to test my android app 24h day and I have 3 ubuntu boxes to do it. I would like to connect my development system (MOTODEV Studio 1.3) to a Remote Device.
Well, the interface ask me about ip for machine and port to connect to.
But it doesn't. I found that the adb sever on remote seems not to listen to external ports, only internal loopback, making connections machine-machine impossible.
Could it be true? If so, why there is a section on Device to connect to Android Remote Device on MOTODEV Studio?
I've found an explanation and a workaround in this post (http://rxwen.blogspot.com/2009/11/adb-for-remote-connections.html) but it seems complicated and post's links doesn't work, so I'm confused whether there is a solution to do that.
View 1 Replies
View Related
Dec 10, 2009
We have a fast and powerful machine(Ubuntu 64bit) and we are sharing it for Android development. But when running multiple eclipse (with ADT) instances (by multiple users), we are getting the following error:
Could not open Selected VM debug port (8700). Make you do not have another instance of DDMS or of the eclipse plugin running. If it is being used by something else, choose a new port number in the preferences.
And some of the process names are not shown. It shows a bug with red- circle and a question mark instead.
I tried to change the port number under windows-preferences-Android- DDMS-Base local debugger port to 8800, etc. but it does not seem to help. (closed and reopened eclipse)
I ignored this, selected the process and it shows 8607/8700 (I found the process ID I want to debug using adb shell, ps)
And then I tried debugging this. It throws "failed to connect to remote VM"
Is it just not possible for multiple developers to debug different Android applications using multiple eclipse instances at the same time? If it is possible, can somebody please tell how we can do that?
BTW, it did not allow me to launch emulator, while somebody else is running one. I had to change permission to /tmp/android folder.
View 3 Replies
View Related
Jul 15, 2010
Currently I am using Android emulator for development, but it is very slow. I am looking for some android port that can run on real CPU.
For example I installed this product http://www.android-x86.org/documents/installhowto on VMware, and it seems to work much faster, but I have no idea how to setup network connection here.
The question is if some one is using alternative android setup for development, instead of emulator? If so, a link to configure instructions would be great.
View 1 Replies
View Related
Mar 5, 2010
I am trying to install and run Android NDK on my windows xp machine. I am new to NDK and looking for some help in understanding the installation process. I have downloaded cygwin and GNU Make 3.81 but running the build host-setup.sh command results in a 'Could not find a valid GNU Make executable'.
View 4 Replies
View Related
Jul 24, 2010
I am looking to simulate a slot machine, now so far I am just animating drawables and looping it to create the effect. I was wondering if I could achieve this through a listview instead. I tried looking at this approach but I cannot get it to loop back to the beginning after it reaches the end.
View 3 Replies
View Related
Sep 9, 2010
I am looking for a slot machine with multi-line betting.
I had one, but did a factory reset and now cannot find it on the market.
Here is a pic of a similar slot machine, so you see what im looking for.
I dont mind if its free or paid, thank you.
View 6 Replies
View Related
Aug 27, 2010
To this point, I've been doing development on multiple machines but always packaging for deployment on the same machine. If I want to package for deployment on another machine, will simply copying the keystore file to the new machine do the trick? Anything else I need to be concerned about when doing this?
View 6 Replies
View Related
Aug 5, 2010
Okay, so I downloaded the Android Central Sideload Wonder Machine for the Mac, and it is a file called swm-install.sh. When I clicked on it, it opened up as a text file. I tried renaming it swm-install.command and it wouldn't open saying that I didn't have the priveleges/permissions, even though I unlocked it in the Get Info Window.
I tried using Platypus to make it run as an application...but I'm unsure how to get that working. I don't understand terminal and coding, although I'm willing to learn new things. How do I get this to work?
I need detailed instructions for a novice?
View 1 Replies
View Related
Mar 26, 2010
My activity needs to communicate with a java server located on my dev machine. Actually, using the emulator, I can access the server socket via the special 10.0.2.2 address. Now I'd like to test my app on my phone connected via usb, but it seems like I can't use 10.0.2.2 to access my dev machine localhost anymore. Naturally using a wifi router and a proper lan addressing does the trick, but I need to use usb connection instead. Any hint ?
1. Emulator-based scenario: standard java server running on my pc @localhost:15000 android java client running on my emulator. When the android app needs to contact the server it uses 10.0.2.2:15000 like specified here. Everything works fine.
2. Proper wifi scenario with physical connected device: standard java server running on my pc @192.168.1.10:15000. android java client running on my device with 192.168.1.11 address assigned. When the android app needs to contact the server it uses 192.168.1.10:15000 and everything works fine too.
3. Desired scenario: standard java server running on my pc @localhost:15000. android java client running on my device connected via usb cable. No network is active. When the android app needs to contact the server it tries to connect to 10.0.2.2:15000 but instead an exception is thrown (Network unreachable). It seems like special address 10.0.2.2 works only for emulator instances. I just wonder if in the adb/adt suite there's a way to access pc address from the device connected via usb cable.
View 2 Replies
View Related