I suddently run into this problem. My desire was feeling little slow today so i rebooted and now it says "The SD card has an unexpected problem" and wont mount it. it says SD card in read only mode. Tried rebooting again, took battery and sd card off but the problem stays. is the SD card damaged or what should i do? tried SD card on other computer and it worked fine. Seems like software issue orsumthin
View 1 Replies
When the (HTC Desire) phone is powered up it is unable to mount the SD card, and I am unable to have it mounted from the "Settings > SD card & Storage" menu. Having said that, the micro SD card can be accessed from a computer (when plugged in directly to the computer, i.e. no issue with the card), and moreover, when I am in the recovery mode, I can have it mounted and browse it. By the way, the card could be accessed from the phone until I downgraded the O/S, and managed to have it rooted.
When the phone is running normally, and connected to the USB port of a laptop, the laptop does recognize a device connected (can even do ADB), but I believe because the SD card is not mounted, the phone does not offer the option to make the card appear as a disk drive for computer access.
I am running the original (RUU, Telstra) Android 2.2 (2.26.841.2) on a HTC desire, after I had it "S-OFF'ed". After reloading the original 2.2, I had it rooted.
The micro SD card is a 2GB one, with approx 1.5GB formatted as FAT16 (contains typical file and photos), and 0.5 GB as EXT3 (contains nothing at the moment).
HBoot: 6.93.1002
S-Off ( Revolutionary)
Recovery mode: ClockworkMod v5.0.2.0 (I manually loaded it)
I have searched online for solutions, and have not been able to have it fixed. Others seem to have different issues to that of mine. Usually, they cannot mount the SD-card at all (not even from recovery), or their SD card just needed to be reformatted. I think I have indicated that these do not appear to be relevant to my issue at all. I have also tried "Fastboot oem enableqxdm 0", and it made no difference.
I've tried both the manual method as well as the Easy, one-click, auto root out there, but I can't get root to take on this device. I think I'm probably overlooking something simple. What I need to know is. Well, everything from start to finish. When I connect to my PC, I have enabled USB debugging. Should I allow the SD card to mount or keep is in "charging" mode? I have experience with the manual methods where you access ADB Shell and copy/paste commands. That's how I rooted my Hero. But I think the connection is not right somehow. I'm seeing a lot of failure messages.
View 1 Replies View RelatedFor some reason when loading my SD Card it says "Mounted Read Only". I have been messing around with installing new ROM's and that which is probably what caused it?
View 6 Replies View RelatedMy new HTC desire is unable to read or write to my 8GB SD card which was previously inside my HTC HD touch.
Why is this? I've swapped the SD cards around - i.e. the 4 GB SD card which it came shipped with is now inside my HTC HD touch It doesnt have a problem reading or writingto the 4 GB SD card that it came shipped with. I would prefer not to have to format the card
Update my Desire to 2.2 yesterday now everytime i turn the phone on i get an error message saying: Mounted ReadOnly. The SD card has an unexpected problem. Tapping.....(cant read the rest of the message) Can anyone help with this. The only way i can access my photos or music is going via a file explorer.
View 49 Replies View RelatedRight. Originally had leedroid 2.2a but then flashed defrost 5.3 to see what it was like. Found it was not very stable so i decided to nandroid restore back to leedroid, now my memory card has changed to read only and I can't use it with my phone.
View 5 Replies View RelatedI'm having a problem with ES file explorer. After several days I managed to root my HUawei U8800 Ideos X5 (Android 2.3.5) and obviously one of the next steps is installing CWMR. Unfortunately I'm failing here too. I tried to copy the recovery.img to the .cust_backup/image, but it keeps to say copy failed. Root access was given and I checked all four boxes in root settings. Someone in a german forum told me to update the binarys in SU, which failed too (it says sth like copy su to /system -> failed!). I'm not even sure ES FE would work if the binarys would be current.
I already tried the app Mount /system (rw / ro). It didn't work with this too.
I replaced my original sdcard with a sandisk 16gb card. Everything went well until I started getting these blasted read on errors. Earlymon suggested a fix from another board but I don't have a stand alone card reader so I couldn't do it that way.
I was wondering if I just backed up all my stuff from my sdcard to my iMac and then just reformatted my sdcard via the phone, would that solve my problems?
After powering on my phone this morning(I charge my phone off to bump charge my 2100 battery ) I tried to play a podcast on Google listen and noticed my phone said there was no SD card. I tried everything. Rebooted several times and I even booted into recovery. I got weird screen, triangle with an exclamation! So I rebooted back into current Rom(Ruby1.1). So I finally bit the bullet and decided to reformat the SD card (through the phone) and it still doesn't work! I don't have access to a computer but it looks like my SD card is toast. This card is a 8gig scan disk that came with my old BB Storm. Luckily the 2 gig SD that came with my incredible has a nandroid back-up, but its a 2.1 back-up. Not sure if it matters but I do have an extra backup. When I get a home I'll get another SD and do so backups. Just thought I le you guys know to tell everyone to make extra backups!
View 2 Replies View RelatedSo I somehow killed my 2GB SD card last week (accidentally unplugged from the laptop while it was writing data- wasn't recognized as existing by my phone or laptop after that) and just got a 4GB card today. I formatted it (FAT32) before trying anything, then copied my files back from my laptop onto the card and ran a new Titanium Backup batch thingie. Everything was fine, and I was going to go create a new backup file through Clockwork Mod so I could flash a new ROM on there and I get this message.
View 6 Replies View RelatedI have not long bought my first tablet - its an ly-f1 / alldro speed etc clone. It came with android 4.0.4 and was already rooted. Play store access isn't bad for standard, i have found most things i have looked for, although some say device is not compatible - for example the speedtest.net app and itv player. There's some it cant find either like grand theft auto 3 for example.
The performance for the tablet is ok but i understand a custom rom could improve it and also give better play store access/compatibility. So i started looking at what roms were available, i found troys CM9 and CM10, so wanted to try CM9 first. This is where i started running into problems. Mainly finding everything i needed - CMW, ADB drivers etc.. oh and mounting the sdcard! as below..
I managed to find CMW 6 for the ly-f1, which i copied across onto the tablet and ran using a shell to install it. I copied across the CM9, compatibility and gapps zip files to the internal sdcard. So far so good, however.....
when i rebooted into CMW and went to "install zip from sdcard" then "choose zip from internal sdcard" it comes up saying "cant mount /emmc/"
If i try "choose zip from sdcard" rather than internal sdcard, it says "cant mount /sdcard" - to be expected as i dont have one in it! but i cant figure out why the internal one doesn't work.
When the tablet is on i can get into the internal sdcard fine and if i connect it to the pc i can see it fine. I've looked around google and the forums and tried a few various things with no joy - for example i tried copying everything off the internal sdcard and formatting it - done this through the android setttings and through windows - both fat32 and ntfs just to see, none made any difference.
I then thought i'd try find another version of CMW in case it was that, i found a version 5 which is when i required the ADB drivers as it was a different method for installing it - got it installed and it rebooted into CMW but i had the exact same problem, still cant mount it, so i am still unable to flash to a new rom.
Is there another method i can use to flash the device? I know theres livesuite but not sure if this is suitable for CM9 since theres 3 zips that need installed? i cant understand why it cant mount the internal sdcard.
I rooted last night, DL LFY and LFY1100 kernel. I installed the kernel and then LFY itself. After trying to reboot it only gets to the custom boot screen and will not launch. After 15 minutes I pulled the battery and tried to launch in recovery mode to load my backup. Upon trying to do that it says cannot mount to SD card. I try again and same thing. After failing to mount it goes into the same custom launch screen for LFY but no OS comes up.
View 41 Replies View RelatedI am not able to mount my SDCARD using NPS. My phone does not has a CSC file and I understand that updates wont work. But everyone seems to be able to mount the SD card and copy files to it. I want to update to Galexo roms but not even able to mount my phone.I disabled the mass storage settings and enabled the debugging. I was able to flash the phone using Odin and also able install the recovery image from Galexo.
View 1 Replies View RelatedI just got a new 16gb class 10 sdcard yesterday. I formatted it, partitioned it w/ killertonez a2sd, and flashed Velocity .3 with Turbo4 and OC kernel. When my phone reboots, I get a notification that reads "SD card removed" and it will not load my ROM or anything. I can manually re-insert the card, but none of my data will load; and every time I reboot or power cycle my phone, I get the same error message. I didn't do anything out of the ordinary and I've wiped/reflashed a few times now. I know I am doing it correctly - is this just a card or phone issue? Is there a script to permanently mount the card?
View 4 Replies View RelatedYou know, I hate that feeling when you join a great forum, and having to ask for some sort of help in your first post. *sigh* Anyway, here goes.I just got my DX, and its pretty awesome. I love almost everything about the phone. The problem is that the SD card won't work, and I'm not sure if it's the card or the phone. On around the 5th day with the phone, I was listening to music with pandora, and decided that I wanted to play a little Super KO Boxing 2. However, the battery was really low at the time. Because of this, as soon as I opened the game and it started searching the SD card for the down loadable content, the phone ran out of battery and the screen froze. I had to turn power off. Later on when it was done charging, I turned the phone on again, only to be notified that the SD card was of an unsupported filetype. So I formatted it in the settings menu, but nothing happened. I clicked format again, and still nothing. Now, even when I click the "mount button", nothing happens. I have tried removing the card and turning the phone on an off. I don't actually own a pc card reader but would have no problems with buying one.
View 1 Replies View RelatedThis just started today, after having worked flawlessly up to this point. When i connect the Eris to my laptop via the USB. Select ' Mount as Disk Drive'. I receive an error from windows saying 'USB Device Not Recognized'. It lists it as an unknown device and will not mount the SD card. Ive tried restarting both the phone and computer to no availer.
View 2 Replies View RelatedI never connect my eris to the computer. However, I cannot save images from the backgrounds app because it says "Could not save the image. Please make sure SD card is inserted and mounted." I'm positive my SD card is mounted, so how can I fix this?
View 3 Replies View RelatedAnyone else having major problems with their SD cards running CM6?? I cannot use my SD card or mount it on my computer!
View 3 Replies View RelatedHow do you mount the micro sd card
View 4 Replies View Relatedafter I failed trying to install jaggydzire/blackjack, my explorer can't mount my sd card anymore, i can get to recovery but i can't install any ROM, tried the fastboot oem enableqxdm 0 but nothing happened..my sd card is working, i formatted it using a pc, but still i can't mount it in my phone...what else should i do?
View 4 Replies View RelatedI decided I wanted a fresh start on my phone so I backed up my pictures and formatted my SD card. I just used the default one in settings. After I did that, every time I press mount SD card, i get a notification that the SD card is safe to remove. I booted up in CWM and tried partitioning it and it says it worked, but I still can't mount and I get "Error mounting /sdcard!".
View 2 Replies View RelatedHow do you mount the sdcard with clockwork? In SPR there were various mount options.
View 4 Replies View Relatedi get the newest code and make it .but when i mksdcard, and mount it as same as i did before. but now i can not acces sd card int the emulate. who know why?
View 3 Replies View RelatedI cant mount my sd card with debug on, but I can mount with debugging off. Why?
View 1 Replies View RelatedIs it possible to mount/unmount the SDCard through an Android application? I am writing my own desktop application which needs to to pass some data into the Android phone which will be used by an Android application and at the same time copy some data from the phone into the desktop application. Any idea how to implement this? One idea is through SDCard. But is it possible to mount and unmount programmatically? Because data cannot be written into the SDCard while it is mounted. Is there any other method?
View 9 Replies View RelatedI'm trying to mount my SD card on my MacBook Pro with the stock USB cable. I had a Moto Droid before my Fascinate, and I knew what to do there � turn on USB debugging, then drag down the status overlay and tell it to mount. Voila, drive appears on desktop. Here, though, I can't get that to work. I have debugging turned on, I've told the phone to mount the card over USB, but my Mac doesn't see it. This is a stock Fascinate, about two weeks old and not rooted. I', I've tried both USB ports on my computer, and that hasn't made any difference.
View 8 Replies View RelatedI started having this problem today. When I connect the phone to my pc, the SD card does not mount. I've tried rebooting the phone, unplugging/replugging the usb from the computer and phone, debugging mode on/off on the phone, and clearing all of the device entries from the Windows registry. The error in event viewer shows: Event id 11: The driver detected a controller error on DeviceHarddisk2DR27. Error I get is 'please insert a disk into removable drive (drive letter)'
View 8 Replies View RelatedI am using Auto Mount SD Card (Auto Mount Your SD Card - Android app on App Brain) on my Incredible. It was working fine until I updated to 2.2. Now it seems broken. Anyone else experiencing this?
View 1 Replies View Relatedi just upgraded from a motorola droid to a Droid incredible, and when i mount my SD card to my computer my computer finds 2 new devices instead of just 1 like on my moto droid. one of them is for my SD card and the other is just random files like HTC sync and some random music. so does any one know if there is a way to make it so that only my SD card will come up because that is all i really need.
View 3 Replies View Related