My desire is fantastic, was delivered when they said it would be and all the staff I've dealt with have been fab. The only gutting thing was that my desire had a stuck red pixel in the middle of the screen that was visible on any white background like a web page or the dialer. It is small but it is annoying so I decided to phone up T-Mobile. Amazingly they have arranged for a swap to happen tomorrow. Can't fault them at all.
View 11 Replies
My poor Desire appears to have 1 dead pixel. I can't see any others. Would you accept this? I am tempted to take it back and get a replacement, but I am worried that the replacement might have more? I have always been unlucky with dead pixels.
View 24 Replies View RelatedI got my evo last Friday and I have noticed a dead pixel. It's on the e key when the keyboard is up and can only be seen on a white screen. My question is should I exchange it or is one dead pixel nothing to worry about? It looks like a little purple or red speck.
View 24 Replies View RelatedSo when I bought the Evo, the first unit had a crack on the bottom of the LCD, then I got a replacement that same day and it had a dead pixel. Sprint said they couldn't exchange three in one day, so they said they will call me when my replacement unit comes in, but I want to know if there is anyway to fix this one dead pixel?
This is a dead pixel, not a stuck one. I can only see it on a white background and its a black dot. Any thoughts?
This might be really nit picky but there's a dead pixel on my screen and it's very obvious when I surf the web with the white background. I'm coming from the iPhone apple would replace the phone..do you think verizon would or should I just suck it up?
View 7 Replies View RelatedDo you have a dead pixel? Are you living with it?
View 14 Replies View RelatedI got my new Moto Droid on the day of release, which so far I absolutely love. However, I just looked at it and noticed that there was a single dead pixel in the top left corner. I wouldn't have even noticed it had it not been on the gray background of the top status bar the rest of my wall paper is black so it would've been easy to miss.Has anyone else experience dead pixel(s) on their new phone? I'm going to try to get it swapped out this afternoon which I think they should do. It just makes me mad that I have too.
View 4 Replies View RelatedI got a dead pixel, this will be #4. I am thinking about switching phones.
View 47 Replies View RelatedWell, I did this on my phone and noticed I had a lot of dead pix. Here is how you do it:
1. Go to the your backlight setting and turn it up to 100. MENU>Setting>Sound & Display>Brightness You have to disable the auto blacklight first.
2. Launch you camera app
3. Hold your finger over the camera lens and count the dead pixels
I was disappointed to actually see so many. You really don't notice them during normal. Unfortunately for me, Best Buy has a cap on Sprint phones (only able to exchange 3) returned and exchanged. I have to take mines to a authorized Sprint repair store.Does anyone else have dead pixels?
I bought the Thl W5 and he came with one white dead pixel and slower i expect.
To correct the problems i decided to flash the phone with the latest update from the THL website.
For my surprise the oficial ROM from the THL do not support the Brazilian Portuguese, only english and chinese.
Could backup and upload the international ROM that comes with my language?
note: this is an artist rendition because my digital camera is terrible and i couldn't figure out how to get the dust in the shot. but it looks just like this. it's a black speck under the screen that can only be seen on bright surfaces and only if you are looking at the screen head on. i'm not sure if it might be a dead pixel. i can certainly live with this problem although i'd prefer if it wasn't there.
1. is this a dead pixel or dust?
2. how do i fix this, can i just exchange it at the vzw store whenever they stop being sold out?
I called up service just now and looks like I have a dead pixel that a battery pull didn't make go away. I am annoyed now because I will have to do what they called a master wipe or something and all the customizing I have done will be gone. I don't even know what I am doing but I will just go to the store by work to have them walk me through it.Is there anything I need to know about a master wipe and keeping all my stuff intact?
Is there something that wrapsol will do now that my nicely protected and wrapped phone is going back to the verizon God's?I also told them about the 2 times in the last week the phone went to sleep/blacked the screen while scrolling through the home pages without hitting a button or anything and they said neither the pixel or the phone going blank are known issues
I love my new vibrant and recently developed a dead pixel. I've whipped my phone clear of finger prints now and still when I open my flashlight application, I find a single blue pixel. Unless it's grey/black it becomes quite annoying. I hardly notice it with my nexus one live wallpaper but thats about the only time I don't notice it. Should I stop complaining and deal with it or should ask for a replacement and throw out 10 bucks(and later pay 15 for a new screen protector)to ship it back hoping it doesn't get lost by the postal service which would mean I'd have to pay for the replacement/further deal with hell in that situation(Sorry, never had good times with them)and start backing up now?
View 21 Replies View RelatedI've had a HTC Evo now for 2/3 weeks, and I love it! But over the last few days it's started to act funny....
What it's doing is lets say I unlock the phone and have it laying on my desk, in the past it would show the screen in portrait orientation....but over the lat 2/3 days its been jumping to landscape and I have to pick up the phone, tilt it to get it back to portrait, and if I lay it back down it will go back to landscape.
This is mainly annoying when checking emails/texts/etc, but also if I am on the train and holding it near my waste, depending on the angle it will bounce back and forth from portrait to landscape!
I originally did a reformat when I bought it, and I am going to do it again shortly to see if that helps....just wondering if anyone else had this problem and if it's fixable (and yes i do want auto rotation)....
My phone has a few other problems such as minor light leakage, and a dead pixel (which I was going to look past and keep the phone)...so if this is something wrong with the hardware it would be a pretty good reason to get a replacement within my 30 days....
I have some png files that I am applying a color to. The color changes depending on a user selection. I change the color via 3 RGB values set from another method. The png files are a random shape with full transparency outside the shape. I don't want to modify the transparency, only the RGB value. Currently, I'm setting the RGB values pixel by pixel (see code below).I've come to realize this is incredibly slow and possibly just not efficient enough do in an application. Is there a better way I could do this? Here is what I am currently doing. You can see that the pixel array is enormous for an image that takes up a decent part of the screen
View 1 Replies View RelatedI had an HTC Desire delivered yesterday, and I used the system update to install 2.2 Everything seemed to work perfectly for 24 hours, but this evening the device is coming up with "Error" when you try to connect to wifi, and it also refuses to switch on bluetooth at all. Does anyone know if this is a 2.2 issue (and therefore likely to be fixed in an update), or if this is a problem that has been around for a while and the phone is knackered? I have seen posts by people with similar issues which predate the 2.2 release, but it can be hard to tell if they were running the official software or not.I want to avoid installing anything that may invalidate the warranty.
View 4 Replies View RelatedI've found lots of tips and tricks, but not really the answer to what i am looking for. Should I be waiting until my phone is dead to charge, or simply charge when ever I want to maximize my battery life?
View 6 Replies View RelatedI updated to 2.2 OTA a few days ago and since then my camera doesn't work. When launched all I get is a black screen that sits there indefinitely. If I kill all running processes and try again the screen goes black and immediately returns to the home screen. I did notice that a few days ago it suddenly started working again out of nowhere, but the following morning it was dead again. I've tried a full factory reset but no joy.
View 3 Replies View RelatedAndroid Version: 2.2 T-Mobile branded
Network: Base - a brand of e-plus, Germany
Taskiller Used: None
Issue: Switch on tethering OR mobile hotspot ->mobile network dies
I've installed Froyo on a T-Mobile branded Desire. After the update, turning on USB tethering leads to immediate loss of mobile network - it just turns itself off. Same goes for the mobile Wifi hotspot: turn on -> for 2 seconds, it's working -> mobile network drops off. Moving into airplane mode and back brings back the network, but tethering is a goner. With 2.1, USB tethering had worked. I'm on Base, a brand of e-plus. I've talked to their customer services, they say Base absolutely supports tethering.
I have been trying to find a way of quickly switching off/on the Mobile Network setting from the home screen. When searching Google there's loads of pages stating that it is an HTC Widget that can be added. I have checked all the widgets on the Desire HD and cannot seem to find it anywhere. I am using an unbranded handset.
The Desire HD manual even states "You can also add widgets that allow you to quickly switch on or off certain settings of your phone, such as Wi-Fi, Mobile Network...".
Does anyone else with an HD handset have this widget ?
Just a simple question to anyone who ordered the Desire from mobilephonesdirect, Do you get 3 free months worth of insurance with the phone?
View 2 Replies View RelatedI got my Desire 3 weeks ago. At first everything was okay and the websurfing experience great. But during the last week the browser has been forcing me to view the sites i visit in mobile view, only some of them and unluckily the site i visit the most. I've had the mobile view setting unticked from the beginning. So thats not the problem. I've also tried to clear all the browser data and reset to default settings many times But nothing works. I'm starting to think that a factory reset is the only option, but I wanted to check if someone else has experienced this and/or knows a solution to this problem.
View 2 Replies View Relatedhaving loads trouble trying to connect, on o2 network (but phone was intially vodaphone) when i purchased it got APN settings and all sweet , then htc sent update to my phone and since then no joy , went back to repair centre , recived it back yesterday and it's still the same argghhh.Htc say it's because it has been on vodaphone and this is causing the problem (even though it worked fine before they upgraded software!).
View 3 Replies View RelatedI have a Virgin Mobile branded HTC Desire with a Virgin Mobile SIM card.The handset was purchased outright. The contract is a rolling 30-day contract so I can cancel at any time.I'd like to move to O2 purely for the coverage.How do I go about debranding the handset and (I presume) unlocking it so that I can use an O2 SIM card in it?
View 4 Replies View RelatedHas anyone else tried this? Thought I'd add sky sports bundle. First try just said payment pending. Phoned T-Mobile, woman asked technical and came back to say it wasn't supported anymore and I couldn't get it. However, just tried now and its working but only on 3g and not WiFi.Thinking it's because my broadband WiFi is blocking access as it is o2.
View 6 Replies View RelatedI'm not even concerned with the camera per se. I want at the closest thing to the display screen. Meaning: it could even be the desktop the user is looking at, completw w/ the background and the icons she moves back and forth.
Let's say, at time t=1 sec, the app goes to pixel (78, 300) on that display and obtains its value. What may be at (78, 300) could be a portion of the icon or some speck of tree leaf on the photo being used as desktop background.
I'm familiar with BitmapFactory.decodeFile() for getting at the pixel contents of a file. But what about the display?
I am new to Android and OpenGL world. I've created a new ap using openGL ES. The package is attached with this mail. Android Simulator LCD size is 320 x 455 and i've set same size for OpenGL Viewport. But For creating visible rectangle i've to use vertices, which are of very high value.
E.g.
CODE:.....................
I have had my phone for 3 months now but every time I check it says my phone is up to date. When will T Mobile have 2.2?
View 21 Replies View RelatedFile file = new File(fileName);
Iterator iter = ImageIO.getImageReadersByFormatName("Reader");
ImageReader reader = (ImageReader) iter.next();
ImageReadParam param= reader.getDefaultReadParam();
ImageInputStream iis = ImageIO.createImageInputStream(myFile);
reader.setInput(iis, false);
BufferedImage myJpegImage = reader.read(0, param);
How can i write equivalent codes for above codes on Android? Are there any hints how to read pixel data?
I am looking at the source code of a Camera Preview application and learning that the preview buffers coming from the sensor is in YUV422 format. However, this preview frame is showed on the display in RGB. Can someone please let me know where the pixel format conversion happens? Is it inside Surface Flinger? If yes, can you please point me to the code?
View 5 Replies View Related