I am trying to make a port of my phone to cm9.
But there's some problems
-I am unable to locate the kernel file in my stock rom
-The phone doesn't start bbot animation -It show the first logo, the second and keep stuck- I can't have a logcat.
Note : I haven't bricked it, i can start cwm.
View 4 Replies
I know I can access android source code from http://android.git.kernel.org/, but it's hard to select the right git repo if I only know the package and the name of an android class.
Isn't there a way to locate a file in http://android.git.kernel.org/?
So, I've got this LG730/Venice (Boost Mobile), also known as US730/Splendor. The problem is that it is stuck in a boot loop(repeating LG logo). I have tried every method, but the phone will not hard reset. I now want to try a recovery on it. I have found a way to get it into download mode, BUT after scouring the net I can not locate the stock ROM or a custom ROM that will (specifically) work with this phone. I would prefer the stock ROM if it is out there somewhere. Any ROM out there that will work for this phone? Also, are the ROM's phone specific or can the same ROM be used for different phones, for instance, can the ROM for the Optimus L7 be used for this phone?
View 3 Replies View RelatedI've had this issue with Nexus 7 rooted stock ROM 4.1.2 and 4.2 using TWRP 2.3.2.1.
Earlier I had gotten a TWRP version to save to a USB-OTG but then I had some problems with root and I re-rooted the device. Then I got error message trying to use TWRP. I upgraded to 4.2 and problem persisted.
Running stock ROM 4.2 on rooted Nexus 7.
Backup Complete
Failed
Backup Folder /data/media/0/TWRP/BACKUPS/hash and date
E:Unable to locate android secure partition
Using Ghost Commander, I go to /data but the folder does not open. I can go to /sdcard/TWRP/BACKUPS/hash/hash/date and that folder does open, but it is empty.
I am using Samsung Galaxy III , Android 4.1.2 , model is GT-I9300
I want to locate the file where the Personal Language Data is stored (Predictive text)
The Keyboard I use is Samsung keyboard.I went to Samsung Keyboard Setting > Predictive Text > Personalized Data is check on. I can not find any clue how to export this data to a text file or database file so i can browse / edit it or transfer it to another device.
where I have got right now on my phone, which is:
1. I updated to stock 2.1 using the sprint update tool.
2. I followed the video tutorial to root the phone
3. then i used joey's page (http://www.joeyconway.com/sdx/custom/index.php) to install the his kernel (joeykrim-SDX-kernel v2.0.4 (includes root)).
I have done nothing else to the phone but this and removing a couple of bloatware apps (i checked the list of permitted deletions before i removed anything.) I have not installed a new recovery..at least i dont think that I did as part of one of the other operations I performed (as an aside, i am not really sure what the custom recovery is or what it is used for, so i didnt install it...i guess i need to read up more...)
So that is where I am..but i have a couple of questions.
1) i am now having issues with my wifi connection - the signal reception is very spotty in areas where i should have atleast 2 bars of reception, and the wifi often cuts out completely....Is there any know corellation between joey's kernel and this wifi issue? I have searched the forums and have found nothing that answers this.
2) Is there an easy way to get back to the stock kernel? I have read that i can get back to stock everything by using the sprint download center where I did my original 2.1 update. But is there a way to get back to just the stock kernel without wiping the phone?
So everyone hates the Sprint Navigation because it constantly runs and drains your battery... agreed... but I don't really feel like rooting my phone if I don't have to so here's the dilemma and question.
Dilemma: Sprint GPS seems to be the default GPS to for the web broswer to use. Because of this an app like Zombie Run's Multiplayer, cannot communicate with GPS satellite's it's set up for because the phone is connecting with Telenav (hypothesis, but Verizon phones locate gps and sprint does not)
"Aboutebug" in a web browser only gives the option to use gps or not.
Is there anyway to select which GPS program you want the web browser (or phone in general) to use?
I was wondering if anybody had the same issue with GPS as I did. When I launched Locations first time, it found the satelite very fast. Now it almost cannot find a satelite to update my location. I wrote almost, because once it did manage, but that was once in at least twenty tries. Do you have any idea how to check if the radio is ok. I read somewhere that one should try with master reset of the phone. If so, would it be enough to backup my data with Titanium backup and option "Backup all users apps + system data" and restore it later on? Will that make a full restore of my phone or do I have to backup some additoial data? Like, what will happend to my personalize data, apps passwords etc.
View -1 Replies View RelatedI'm playing with my u8180 stock rom .. I've rooted it and Soo on but only kernel can be over clocked to 600 mHZ and Min 122 .. how can i change it ?! or how can i copy a kernel from other rom to my rom ?! I'm usind Disxda kitchen
View 4 Replies View RelatedI have a stock N1 with terrible battery life. I have stumbled intersectRaven's mod/Kernel at: [URL] .....
I would like to ask how I can install this on my N1, is it just a matter of downloading the right file, renaming it to update.zip and then doing what I've done to update my phone as with official updates?
What do I need to pay attention to and is there a way to revert back to the original rom/Kernel if I'm having issues with this mod or if I want to sell my phone?
What is stock kernel .my mobile showing 2.3.6.how can I install jelly blast for galaxy y? GT-S5360
View 1 Replies View RelatedI have an Samsung ace3 S7275R LTE Malaysia variant..
Installed this kernel and found out not very stable.
[URL]
How to restore to stock kernel? without replacing ROM?
How I can initd support to a stock 4.3 kernel? I found only how to's with don't work on 4.3. Xperia SP
View 1 Replies View RelatedThere are only multiupload links I can find on the internet but it is a broken link.
View 2 Replies View RelatedI already have my mini x10 pro U20i rooted with CWM and Busybox and I have been looking for the latest most stable ROM to run on the stock kernel.
Preferably something that can install the apps onto SDCard And Works well in low signal strength areas I use apps mainly for PC Repair.
X10 specs
Model U20i
Firmware version 2.1 update 1 no other updates available
Baseband Version M76XX-TSNCJOYLM-5340-4015
Kernel Version 2.2.29 SEMCUser@SEMHost #1
Build Number 2.1.1.A0.6
I'd like to know what are the differencies between kernels for, for example, CM10 and stock manufacturer's JB. Can we use stock kernel to build something different from stock?
View 5 Replies View RelatedBlackberry user for the last 6 years. Just left the Storm & received my DInc today! A friend of mine sent me a mms with a sound file attached that I want to use when receiving text messages. I clicked the message & saved the file but cant seem to locate it anywhere. Anyone know how I can locate this file & set it as my default text sound?
View 12 Replies View RelatedUnable to find my stock firmware.. every link points to the same file from hotfile.com and my ISP provider sucks causing the download to get stuck in between, tried two times at 100Kbps, failed both the times, once at 62%(552 MB)! its very hard to download it, any non hotfile link or some direct link if possible, can download it and host it as a torrent or something because i have very bad net connection and its slow also.
I am talking about Samsung Galaxy s3 19300 International/India Jelly Bean ROM, or even ICS stock might be ok. _
right now i have the stock ROM and Siyah Kernel and i want to clean instal everything and remove root.
So when updating my phone, I was all like 'I know how this show goes' and like an IDIOT I put my Samsung S2 i9100 kernel file on the bootloader spot and it boots to a black screen. I can still put it in download mode, and tried to install it the correct way but that doesn't matter.
View 4 Replies View RelatedI needed a tun.ko module for my kernel, so I tried compiling my own kernel.
The kernel did build OK, and also boots OK, the only problem is that I cannot load any modules.
It seemes, that the module tools (insmod, modprobe etc) looks for the modules in /lib/modules, and I have them in /system/lib/modules, so my wifi does not work, as I cannot load the module.
Where I can specify the kernel module load path in the .config file?
Example:
# cd /system/lib/modules
# ls -l
-rw-r--r-- root root 315403 2008-08-01 14:00 bcm4329.ko
-rw-r--r-- root root 211573 2008-08-01 14:00 tun.ko
# modprobe bcm4329.ko
[Code] .....
Does anyone have a copy of the regular stock kernel for the Dinc?
View 16 Replies View RelatedRooted my friends ally, installed velocity, than installed dreds custom kernel. The phone isnt liking it at all. I got a nandroid backuo, but much rather flash a stock kernel before restoring back.
View 1 Replies View Relatedwhat kernel are you guys running i have tried kings and netarchy just wondering what else. If your not using it on a stock rooted 2.2 then no need to post in here.
View 2 Replies View RelatedI have a Galaxy Nexus with Stock 4.0.4 ROM and a Transformer Prime also with the stock ASUS firmware (4.0.3), The company where I work has a mail server that supports exchange (Kerio Connect) At that server I have (because I need it that way) 2 different accounts, I need one of those accounts to synchronize everything; contacts, mail, calendar, and the other one to synchronize only calendar appointments.
If I configure the first account everything works just fine. But, when I configure the second account, I start receiving login errors for both accounts every certain time, the apps shows me the option to update my account credentials and when I do it works for the moment but after a while it fails again. If I delete whichever of the two accounts the other works fine.
I have not tested this scenario against other email servers, so I'm not sure if this a problem with my server or if this is an Android problem.
Both accounts are configured as Exchange accounts from Settings menu.
I've got a Nexus S running 4.0.4 and the emulator running 4.1.2. I'm experiencing the exact same thing on both:
I have two exchange accounts configured in the EMAIL application. When I view the unified inbox and compose a new email, I am unable to select the non-default FROM address (clicking the FROM address does nothing). In order to send an email from the non-default, I have to enter the inbox for that account THEN compose a new email - requires several more clicks than necessary.
I have asked several friends and some say they do have this option - however they are all on carrier customized roms.
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable.
i tried to create the odin ready pack of stock rom of galaxy y duos lite but splitfus is not supported for my cell phone. create the odin ready pack for S5302.. i am getting an error that unable to read the input file..
View 3 Replies View RelatedThey tell me this will change again when the Droid X and Samsung Galaxy get 2.2 - I wouldn't know. Until then, here's our moment in the sun. Made this using the Quadrant benchmark, free from the Market, using a the stock rooted 2.2 rom and the netarchy-toastmod 3.7.6c kernel with the 30 fps cap lifted. No over-clocking, no hair-on-fire super tweaks, no killing every process to tweak the benchmark - just downloaded and run, the number on the bar says 1165.
EVO-Froyo-fast.png
The Nexus One 2.2 at the top uses the exact same processor (aside from the radio-control circuit) as our EVO. I attribute its higher score to the fact that it's sleeker and not running Sense. I happen to like Sense so I don't care.
Last night I rooted 2.2 with UnrEVOked 3.21, and I'm pleased that I have Titanium Backup and Wifi Tether. The only other two things I wanted to have were uncapped FPS, and some better battery life. In another thread, I read that you may use a different kernel without using a different ROM. I downloaded KiNgxKernel's BFS #9 and installed, and while I got the frame rate I was looking for, the operating system went in to super laggy mode. It was unusable, so I booted in to recovery and restored the stock kernel from my nandroid backup.
Does anyone have any recommendation on a kernel I can use with the stock ROM?
Also, one other question, I constantly see people advise that cache clearing is vital when changing kernels. I am only aware of Dalvik cache, and the menu option in recovery to clear that cache. I also read many posts that say clearing it is unreliable and only possible with a full wipe. Can someone clarify please?
Thanks guys!
Right now Im on stock 2.1 rooted. A few little issues I had with other ROMs and overclocking are totally gone which is great. I would like to try some different kernels, however, to see if it was the ROM or just the kernels I was using.
Anyways, how do I get back to the stock kernel if I change to a different one? If I have a recent nandroid, can I just restore one of the partitions? I would like to retain all of my data throughout the process so Id like to avoid doing a full nandroid restore if possible should I have problems and just restore the kernel.
Thanks