After knowing that the mtk6589t rom can be ported to mtk6589..... i have started porting one..!!! But after porting it as i regular do... it gets stucked on boot logo..!! it dsnt go in boot loop but gets stucked on boot...!! what shld be done?
View 4 Replies
NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)but the phone still freezing and restarting ...black screen ......after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
New to rooting etc. Have ordered a Jiayu G3S MTK6589T 1.5Ghz phone and wanted to get the phone rooted and CWM installed so I can back up the existing ROM and try some new ones out.
Have seen guides for the G3 with the older 1.2Ghz CPU and also some other phones with the MTK6589T CPU but was unsure if these would work or brick my phone etc.
G3S or has rooted one and got CWM installed successfully. I usually go for CyanogenMod or a simple stock ROM
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
The phone itself was next to nothing ($180) so even if its Unrootable.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail.
I bought recently a Tengda T94 (also being referred to as Dapeng T94).It has MTK6589 chip.
Me,the smartass,wanted to change the DPI setting of the smartphone,because Real Racing 3 lagged a little bit and thought changing it might fix the framerate.I changed it from 320 dpi to 221 with LCD modder and reboot.Then the surprise struck me,when it didnt start,it just stood on the logo and kept replaying it.I have tried with ADB commands - some works,some not.
I am with stock recovery 3e.
Has only few commands like reboot now,install update from adb,cache,sd card and wiping cache and another option for wiping data to factory settings (and two irrelevant options of restoring/backing up user data).
I tried wiping all data and cache,still bootlooping.
Tried with mediatek firmware adapter tool,but i think it cannot change the build.prop file while bootlooping (it cannot find my device when in recovery mode),because it is either in use,or in read-only mode.
Tried with android commander,but didnt know what to do there.
I downloaded rather late a CWM recovery for my phone,and also if I am not mistaken two roms - one of them is exactly like mine.
But when tried to install thru recovery adb sideload it starts and then says : restating ADBD ....... installation aborted and returns me to main recovery menu. Tried with my backed up build.prop which i have put in flashable zip file.
However,the two roms i have downloaded arent working properly.They are zip,but still adb sideload cannot read them.
And another (i dont know if it is relevant) my external sd card 16 gb default,when i put it in my old gsm to put the two roms and cwm recovery files,first windows wanted to format it and the only option was FAT 32,total of 2.87GB.What has happened to my sd card ?
Still I couldnt install from the external sd card the roms,only zip with build.prop file was listed and gave the same mistake as said above : restating ADBD ....... installation aborted.
PP: I have arrived at the conclusion that the problem is this line ro.sf.lcd_density=221,which is in build.prop file (I might be wrong).So the question is can i somehow modify the prop file or what should i do ? And why has my sd card shortened from 14,6gb to 2.87 ?
I bought a chinese MTK6589 phone called the Tronsmart TS7 Glacier. I tried to flash CWM recovery with an app called Flashify. I was using the right CWM recovery for my phone, but when it rebooted it opened the normal recovery mode, and then when I tried to reboot, it didn't get past the first logo that comes up... Normally it shows an android logo, then it goes to a little animation with the tronsmart logo, then it's started up. Now it's stuck on the android logo... I've tried reflashing the stock rom from my SD card but I can't do it because it only works in CWM, the installation aborts normally. I've done it before but I got into CWM through a different app called mobileuncle or something. So yeah what I think I need to do is reflash the stock rom, but I can't do it without CWM, and I can't get CWM...
View 6 Replies View RelatedI have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?
I flashed a wrong ROM, because flash didn't work, I used a Star S5 one instead of a X920Butterfly one. So I tried this guide http:[url]..... but my PC do not recognises phone, I Have Upgraded Windows 7 to Windows 8 so I don't now how I can re-install drivers.
View 2 Replies View RelatedI have been Using Sony Xperia Phones and rooting & installing CWM on those phones is fairly very easy (unlocking bootloader and just installing a Kernel Using Flashtool which comes with CWM and root) ...... However, i recently bought this phone:
[URL]
Its running on Jelly Bean 4.2.1 and has Quad Core MTK 6589 chipset ...
I've bought a Alps Ipegtop Z26 a few days ago, and after a mistake, i need to reflash a rom stock But, i saw that my version was V06, and i can't find it...So, i reflash with the V05 version...
After few problems (bootloop...) ALL works except CAMERA
She's REVERSED !!!
I have test to exchange some lib fils from my first backup (V06) to my actual rom, but it didn't woks...
I was trying to update my s4 clone, but missed click using something called mcm or something and it restore my cellphone to factory data, and know i dont have boot animation logo, i tried to use many programs like boot animation logo changer, rom toolbox but nothing works.
View 1 Replies View RelatedTrying to customize my new device (Runbo X6: MTK6589T, 2GB RAM, 32GB ROM, Android 4.2.1) .
1) Repartitioning
Actually, I successfully edited the partition table in EBR1 and EBR2 and the start addresses in the Scatter file and proofed it multipple times by recalculating, but after flashing, although I get a correct output in system settings and by dumping /proc/emmc, /proc/partitions and /proc/dumchar_info, when I try to push some apps, for ex., above the initial 680MB to /system/app or something similar I get a "disk is full" message. As I was able to find out only the /data and /fat partitions get physically updated by the new sizes, meanwhile the /system and /cache partitions remain physically on the initial state and get updated by the new sizes logical only. Although if after flashing I dump the system image by "cat /dev/block/mmcblk0p5 > /sdcard/system.img" I get an image with a size corresponding to the updated size of the partition.
Initial values:
EBR1
begin /system = 00 18 02 00 (real 00 02 18 00)= 137216 blocks (* 512 bytes + 1024 blocks of 512 bytes) = 70778880 bytes
size /system = 00 50 14 00 (real 00 14 50 00) = 1331200 blocks (* 512 bytes) = 681574400 bytes
begin /cache = 00 68 16 00 = 1468416 blocks = 752353280 bytes
size /cache = 00 F0 03 00 = 258048 blocks = 132120576 bytes
begin /data = 00 58 1A 00 = 1726464 blocks = 884473856 bytes
size /data = 00 00 40 00 = 4194304 blocks = 2147483648 bytes
[Code] ......
I also read somewhere that it is also necessary to edit PMT: in that case I tried to flash with original PMT, edited PMT and without PMT, but cuoldn't notice any difference.
2) Mounting the internal memory and external SDcard on system start natively as EXT4 instead of FAT32
Using my old device (Runbo X5: MTK6577) I had success on mounting the internal storage as EXT4 by disassembling recovery.img and editing /etc/recovery.fstab to change the "vfat" value to "ext4" and reformatting the storage after a successful boot with ne recovery, but on Runbo X6 I get no change to the filesystem after reformatting. By the external SDcard I never had success.
I bought this phone whilst on a business trip In Shenzhen china.
It's was running 4.2.9 jb. 2gb ram 16gb rom 5" screen 1080p
I put 3d chain fire on it and now it's stuck in the boot animation.
I borrowed my friend phone, same as mine and loaded up mtk droid and it generated a backup of his phone with loads of files system folder, boot.img etc
It then packed it up into a zip file. From there I thought I could put the zip file on an sd card and boot into recovery and delete the data / cache and them select install from sd card.But the installation failed
I have a Chinese clone of Galaxy S4 called No.1 S6 with MTK6589 Cpu and Android 4.2.1 (Odexed Rom), well, I tried to replace some system app like contacts, phone and mms with the same apps taken from the Slim bean 4.2.2 Rom for the Google Nexus 4 that has the same screen resolution.
I odexed the slim bean apks with dexopt-wrapper as explained here [URL] ...., I signed them with auto-sign software, so I put them into system/app folder with right permissions, deleting old apks first, rebooted the phone, wiped cache in recovery and when the phone booted the apk I replaced was gone, so I think there's a compatibility problem between my system apps and nexus 4 ported apps, maybe I have to take the slim bean (or other ROMS, whatever) sources and edit the apks and make them compatible with my phone...
How to port system apps from other devices with different software?
I was able to flash ROM from : LNK1 but I have a problem with touchscreen which works upside down. When I press screen on top it actually shows that I pressed at bottom of screen. I was looking for solution many days and have learned a lot from many sites and different forum threads, but surprisingly non of the solution works for me. I am not able to reach proper file to change proper property to change this behavior. Most probably i need to set somewhere: ctp_revert_y_flag = 1 as described here: LNK2, but I am not able to find nor edit script.bin on my phone, here I found some info: LNK3 and also here is very interesting info about partitions: LNK4 but I can't find this script.bin on my phone.
My phone is china phone 1:1 Real MTL 6589 GT-I9500, I was able to flash several ROM's using SP Flash tool from LNK5, I know how to do this, but no matter which ROM I flash no matter which recovery image I flash this touch screen behavior is still upside down as described.
1. set ctp_revert_y_flag = 1 in script.bin on my phone - I can't mount proper partition, don't know which partition should I mount, can't find this file
2. set ctp_revert_y_flag = 1 in script.bin on ROM file before flashing - don't know where to look for this file and don't know how to edit ROM before flashing.
What I know: how to root my phone, how to get to it using adb, how to use android-sdk, how to flash using SP flash tools, how to use recovery mode, clean user data, how to use SP Flash tool, how to switch on developer mode, switch on USB debugging, switch on "show touches".
I saw at software development there is a way to port rom to rom, but the devices need to be in the same resolution. Thread: [URL] For the galaxy ace plus wich device is the good, and wich rom?
View 8 Replies View RelatedThe title pretty much explains my question. I would like to port apps from the Sony-ified stock ICS to Cm10.
View 3 Replies View RelatedMy bro has a note running jb. He has a secgallery app which I cant install on my xperia u wid ics
I always get an error "App not installed".
I have decompiled the app... But m nt a modder so I dun knw what changes to make in androidmanifest or some other folder to run it..
Port CM7 based rom for Galaxy Pocket GT-S5300?
I've tried, but always failed. Only appears Samsung logo when turned on. I follow these guidelines.
[URL]
How to port based on stock rom? I tried to port pyramid's cm9.1 on my device. Both cpu is msm8260..
View 1 Replies View RelatedIf we can play some Unity 3D games (etc.: Counter-Strike) on android, so I have a question how to port these games to android?
Is there any way to play games like these?:
I'm having some problems with the porting of a rom, my phone is a clone of the phone from which i'm taking the rom (My phone is a NGM Legend 2, which is also a clone of Gionee GN868, and the original is Blu Vivo 4.3) the only thing which is really different are the mounting positions of the internal memory.
In Blu Vivo 4.3 the system partition is mounted on /dev/block/mmcblk0p3 and the data partition is on /dev/block/mmcblk0p5 while in the mine they are mounted on /dev/block/mmcblk0p4 and /dev/block/mmcblk0p6.
I changed them in the updater-script so i'm able to install the rom, but i had to replace the boot.img with the one from my rom because the phone wasn't booting up, but i can't install any app from google play store (error 110) or any apk ("app not installed" error).
I want to learn rom edit but how to porting themes on roms?
View 2 Replies View RelatedHow to port Android onto phones? I can't find a lot on the internet...
View 7 Replies View RelatedWhen you are porting a Rom, how do you know which libs to copy over? Also I'm porting for the fascinate, but the porting rom is for the nexus, should I copy all of the hw libs?
SCH-I500
Its just something Ive wondered for a while since Android has a lot of similarities across different devices
View 2 Replies View RelatedI'm trying to port some package from Samsung ROM to CM following this guide and I'm stuck.I decompiled the package, removed TW dependency from the manifest and now I'm adding additional classes from TW framework into this package. Everything was smooth so far as I was getting rid of "class not found" and similar messages in logcat by adding the missing class and recompiling the package.When I try to run the app, I get the following message in logcat:
Code:
I/dalvikvm(30301): Could not find method com.sec.android.touchwiz.widget.TwAbsListView.isInDialog, referenced from method com.sec.android.touchwiz.widget.TwAbsListView.onHoverDrawableState
W/dalvikvm(30301): VFY: unable to resolve virtual method 9561:
[code]....
However, based on official documentation this method does not exist in this class.If I try to add android.view.ViewGroup and android.view.View from stock framework.jar into the package explicitly, I start getting "multiple definition" messages in logcat, and isInDialog still can't be resolved.So, I'm currently stuck.
How to add tweaks and mods while porting a rom
View 7 Replies View RelatedI am trying to port Cyanogendmod 10.1 to a new device - Hyundai T7S.(smdk4412 based). I have successfully compiled CWM recovery image and it work good on the tablet. But when I try to build the whole ROM I receive the following errors:
Quote:
android-dev/cm10.1/out/target/product/t7s/system/app/Exchange2.apk
frameworks/base/core/java/android/app/admin/DeviceAdminInfo.java:411: error 101: Unresolved link/see tag "#USES_POLICY_ENFORCE_MMAC" in android.app.admin.DeviceAdminInfo
frameworks/base/core/java/android/app/admin/DeviceAdminInfo.java:411: error 101: Unresolved link/see tag "#USES_POLICY_ENFORCE_SELINUX" in android.app.admin.DeviceAdminInfo
DroidDoc took 251 sec. to write docs to /home/steals/android-dev/cm10.1/out/target/common/docs/doc-comment-check
make: *** [/home/steals/android-dev/cm10.1/out/target/common/docs/doc-comment-check-timestamp] Error 45
make: *** Waiting for unfinished jobs....
I've tried to find some solutions, but haven't found anything. resolve the errors?
Is it possible to port ICS Contacts and SMS to Gingerbread? If so, where should I start (or if these have already been ported over)?
View 3 Replies View Related