is there is any way to resize the internal system partition. because I am trying to flash a new ROM. but my system partition size is only 450mb and I need around 1gb to flash the ROM. there are different partion like data partition, system partition, cache partition etc, can I resize them a make system partition of around 1gb. my phone karbonn titanium S1.
View 9 Replies
I am using HTC explorer and a few other android devices. The main problem I face while flashing new roms is the lack of space in System partition! Is there any way to decrease the space of /data and add it to /system? Then I can use int2ext or m2sd script to move /data to /sdext!
View 3 Replies View Related resize the system partition of an Android JB 4.2.2 on cubieboard?
Image: sun7i_android_sugar-cubieboard2-8192cu.img
I need more room (it's only 512MB) to install apps.
Well, the APP disk space (nand partition) is very small and the internal "sdcard" too big.
When I install a few applications the space runs out and the system becomes unstable.
I need to increase the nand and decrease internal sdcard to gain more room to my apps...
Well, I started the process by using the tools:
1) To unpack/repack: imgRePacker_204
2) The image ROM: sun7i_android_sugar-cubieboard2-8192cu.img (Android 4.2.2)
3) To burn to flash: PhoenixSuit1.0.6
unpacking the ROM creates a folder named sun7i_android_sugar-cubieboard2-8192cu.img.dump
So, somewhere in internet I see to change the sys_partition.fex file, and search the system nand partition:
Code:
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 1048576
user_type = 0x2
so, I change 1048576 to 2097152 (2097152 * 1024 = 2GB)
but :
1) In installed android, the system has only 512MB and not 1GB as show.
2) By increasing this value, nothing happens when I repack back to IMG and flash to the nand.
(all unpak, change, pack, flash process is fine ! )
Here is my devices list and size:
Code:
NAME SIZE MOUNTPOINT LABEL
nand 3.8G
|-nand1 16M Volume
[Code] ......
I have rooted my Wife's Karbonn S1 Titanium via Framaroot - Gandalf method. It was easy and 100% Rooted.
CWM Recovery Flash process with required steps and files so that I can do the needful?
rooting for ma phone. I've tried framaroot methods bt still fail 2get any success.
View 1 Replies View Relatedmy voice is not heard in this phone Karbonn Titanium S5 when I use viber, but can be heard when I use Skype or use normal GSM calls.
View 7 Replies View RelatedMy phone has 4GB internal ROM with below partitions:
1. mmcblk0p1 1024 ebr1
2. mmcblk0p2 10.00 MB protect_f ->EXT4
3. mmcblk0p3 10.00 MB protect_s ->EXT4
4. mmcblk0p4 750.00 MB android ->EXT4
5. mmcblk0p5 376.00 MB cache ->EXT4
6. mmcblk0p6 1.20 GB usrdata ->EXT4
7. mmcblk0p7 1.27 GB fat ->VFAT
Now, mmcblk0p7 (1.27 GB of vFAT) partition is used as sdcard1 but I also have a 8GB of mnt/sdcard partition. So, the mmcblk0p7 partition is totally useless in my phone. My questions are:
1. Can I add/merge mmcblk0p7 partition with mmcblk0p6 (/data) partition?
2. Or, Can I re-size/increase my mmcblk0p6 (/data) partition from mmcblk0p7
3. Or, Can I make the mmcblk0p7 as a swap partition like linux OS?
My Phone info:
Chip: MTK 6572
Android Version: 4.2.2
Basebad version: MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/07/13 13:02
Kernel version: 3.4.5
tell me which cyanogenmod version is best for karbonn titanium s5.And can i install cyanogenmod 11 in titanium s5.
View 2 Replies View Relatedmy mobile is karbonn s5 titanium.
in cwm i accidentally formated boot function.now my phone is not booting in to recovery.when ever i switch on the mobile its showing "RESET FOR ENTRY QPST DOWNLOAD"..
how do i install paranoid android rom on my karbonn titanium s5 ?
View 2 Replies View RelatedThis is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
Your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
I have an karbonn A25 mobile ,Got the problem low memory when new app get install. i only ablle to install either whtsapp or wechat or fb .
View 4 Replies View Relatedi have karbonn a4+.it has only 139 mb internal memory?
how to increase internal storage by partioning sd card?
and without installing cwm recovery.
but is the internal SD in ICS a partition or a directory on the system that pretends to be an SD card?
If it's a partition then I don't really see the benefit over an external SD - except where there is no SD slot. Obviously if it's a directory then it would grow as required...
how to partitioning emmc to be internal memory? its 2GB size and I don't use that...
View 3 Replies View RelatedWhat galaxy s3 mandatory internal sdcard partition in cwm.
View 1 Replies View Relatedi have a samsung galaxy 3 and i would like to know how to use or resize the rom system storage (I have around 50mb free space, because i removed all stock useless apps) to get more internal storage? I can't move app in my sdcard because it's full
View 1 Replies View Relatedmy internal SDCARD is corrupted and the /data partition is unusable.
My device is i9003 and it's running on MIUI at the moment. By default MIUI didn't detect my external SD or my internal SD but after editing "vold.fstab" I was able to mount the first partition of my external SDCARD as external memory and everything was good, I could finally use the camera and pretty much do everything else.
But I was still unable to mount the second partition of my external SDCARD as my internal memory which meant none of my messages could be saved and the phone would pretty much go back to factory settings after a reboot, this apparently is because the /data partition (present on the internal memory) stores all the user data such as the time, the theme I'm using, etc and not having a /data partition meant none of these settings were really saved.
Having no internal memory also means I cannot install any apps such as Link2SD.
Moving on, after many hours of googling I found out that it might not be possible to mount the internal memory using "vold.fstab" and the only way to do it could be by mounting the memory manually during init.
I want to use the second partition of my external SDCARD as internal memory, this is likely to solve all my problems and make my phone usable again.
i have onlt 750mb internal memory , pre installed app also 450mb , so how to increase that partiaion, can in mount this partiton to SD partition
View 2 Replies View RelatedI have rooted my xolo a500s IPS using farmaroot but when I tried to mount system r/w for pushing some apps and removing some on system partition but it is not mounting because of that i cant make changes on system.how can I mount system partition
View 9 Replies View RelatedWhat is the system partition for ics sense 4.0 for europian hd2? How long it takes for first boot.
View 2 Replies View RelatedIf my understanding is correct, tools such as CWM Installer and RecoverX are made so that users with locked bootloaders will have the privilege of using ClockWorkMod recovery. I myself used these tools. However, now that I have unlocked my bootloader, I want to remove the CWM they installed onto my system partition. I want to know where I can find it and how I can delete it? The reason why I want to get rid of such is because the kernel I'm using now already has CWM and I see no point in keeping a separate one stored on my system partition.
View 2 Replies View Relatedhow to sanitize my phones' internal memory.
I have an HTC ONE, and a Samsung Galaxy S4 that I am trying to sell. I know that it's fairly easy to recover data from a wiped partition by using programs like "TenorShare Android Data Recovery", unless data has been written over them at least once.
I had taken pictures of some documents containing highly sensitive data with the phone, and would like to make sure that those documents are not recoverable by the next user.
Neither of them have the USB Mass Storage option in the settings, so I can't just use some secure wipe program.
I have done all the method of Link2sd by making partition of my sd card. But my Qmobile noir a2 internal memory still going to lower down..
why is it so i hav linked all the lib files, dalvick cache ...every time i installed a new app it takes my internal memory lower down ..
how to resize the system partition on my Sanei N10. I have read quite a fair bit but i am to unsure how to do it. I have downloaded so far livesuit but unfortunately there is only chinese on the Sanei homepage. As much as i understand i need some file from them.So far i have stock rom and the device is rooted.
View 2 Replies View RelatedI've tried to move Swiftkey 3 keyboard to the system partition with titanium backup pro but it keeps force closing, when I done this with Swiftkey X, it had worked perfectly without any force closing. My question is, Is there any way to move Swiftkey 3 keyboard to the system partition without any force closes? (Same with swype beta)
View 9 Replies View RelatedI was trying to expand my system partition size.
I flashed a zip via CWM on my phone, and must have made a mistake.
After i flash, my partition table seems to be messed up.
My "boot" partition is fine. All other partition seems to be "invalid" now.
I am able to enter fastboot, and "fastboot boot recovery.img" to enter recovery
I am not able to boot, or enter recovery mode directly.
I tried to "erase" via fastboot, but the partition is invalid.
i tried to "flash" via fastboot, but the partition is invalid.
Is there any way to "fix" my partitions?
I have downloaded a CM11.zip for my phone.
I have downloaded a stock rom for my phone.
I have access to these files, which are supposed to be system partition tables. found here:
github mirom/android_bootable_recovery/tree/cm-10.1/res/partition
I have a SGS3 Clone based on MT6575. All the details about it are here .
I have 503MB /data partition
2.09GB /mnt/sdcard partition (it is internal sd card i cannot physically acces it .. its somewhere inside it ..
13.49GB /mnt/sdcard2 which is external sd card 16GB which i have partitioned for link2sd .. and this is the fat32 partition size
and 1.15 GB /data/sdext2 partition which is on external sd card which i created for link2sd it is ext4 partition ..
So the last 2 are the two partitions on my sd card .
I want to Disable altogether the Internal SD Card of 2.09GB (if that doesn't creates any problem, or if it does creates problem then i want it to be reduced to the minimum) so that all of that space is allocated to /data partition ( or whatever it is which android complains of low disk space .. )
I have red a thread here but that is with refrence to mt6577 and mine is mt6575 . and i do have its backup obtained through mtkdroid tools and i bricked it once and unbricked it as well .. ( when it was bricked it was total brick it didnt even do anything on inserting the charger)
I am attaching EBR1 EBR2 MBR and scatter file of my device which i obtained through mtkdroid root and tools and the prepared for flash with spf option in mtkdroid tools and here is the Hex dump of these files which i obtained using ubuntu.
s@s-desktop:~/Desktop/ebr$ hexdump -C -n 64 -s 0x1be MBR
000001be 00 00 00 00 05 00 00 00 20 00 00 00 00 f7 10 00 |........ .......|
000001ce 00 00 00 00 83 00 00 00 20 f7 10 00 00 00 10 00 |........ .......|
000001de 00 00 00 00 83 00 00 00 20 ff 20 00 00 00 10 00 |........ . .....|
000001ee 00 00 00 00 0b 00 00 00 20 07 31 00 ff ff ff ff |........ .1.....|
[Code] .......
HTC Desire Z (Vision). I S-OFFed how it's described on CM wiki. Latest radio. About month ago I installed CM 10.1 AlterNdromadus. It worked until yesterday, when it unfortunately installed some system update.
After that phone didn't booted anymore. In recovery it says, that it can't access system partition and formatting is not possible.
I tried connect the phone via fastboot in bootloader, but it also doesn't work. Under windows I have it as unknown device and when I tried manually install drivers from google, it says that they are not compatible with the HW (under ROM it worked before).
I tried also install stock RUU rom (extracted the zip and deleted H-BOOT, radio and recovery) from SD-card (PC10IMG.zip). But it also got frozen on system update.
Here you can see error from 4EXT recovery and CRC images from bootloader.
How can i permanently store custom ringtones on root/system partition? if i store custom ringtones on internal or external sd, profiles are messed up every time i connect my phone in mass storage mode.
View 1 Replies View Related