At present i am using Quarx CM9 nightly(10th July) and apex launcher.on my defy plus BL7.If i want to install CM 10 BY Quarx do i have to use a different kernel while flashing? Is this method OK?
DL CM 10 zip to SD card
open CW recovery
Wipe data /fact reset
wipe cache and dalvik cache
Instal Zip from Sd
installGapps
reboot
View 2 Replies
I just installed CyanogenMod 10 20130110-NIGHTLY to my Motorola Defy+ and I am experiencing this problem:
3 of 4 dock icons disappear after rebooting the phone. It doesn't happen always, just in approximately 50% cases.
Now, it happened after closing and app and returing to launchscreen, plus one widget was gone too It's becoming really annoying, plus I'm having serious issues with connecting to wifi. I guess I'll just start using again Gingerbread that actually works, instead of this piece of... unfinished, not working ...thing
I've been following the development of dzk's CM10 ROM for the Droid X2 and Milestone X2. I was so impressed with his work that I picked up a MIlestone X2 off of Craigslist today, eager to install CM10 and dive into the world of customizing my phone.
It's been an interesting afternoon of workarounds (Rooting required some booting exploits, and the Milestone X2 requires a patched version of the Atrix BSR), but I have everything backed up (Milestone X2 came with 2.3.6) and I'm ready to try out CM10.
However, I've hit yet another snag. The installer doesn't want to install the CM10 zip file made by dzk. Here are the details:
Phone: Milestone X2
Carrier: Cellcom
Android version: 2.3.6
BSR: DroidX2 Recovery GFAN.COM V2.5.1.8
Attempted ROM: dzk's CM10: [URL] ......
Here's my process for attempting the upgrade:
1) Reboot phone into BSR
2) Select "install .zip from sdcard"
3) select "choose zip from sdcard"
4) Choose a zip to apply: cm10/cm-10-20121007-UNOFFICIAL-daytona.zip (I have already verified the md5 sum as matching)
5) Confirm install? Yes - Install cm-10-you-get-the-idea
Here's the output:
-- Installing: SDCARD:cm10/cm-10-20121007-UNOFFICIAL-daytona.zip
Finding update package. . .
Opening update package. . .
Installing update. . .
assert failed: run_program("/tmp/check_kernel") == 0
E:Error in /sdcard/cm10/cm-10-20121007-UNOFFICIAL-daytona.zip
(Status 7)
Installation aborted.
I've gone through the original thread and haven't come up with much to go on. The only thing I can conclude is that I have to SBF to an earlier version of android. The only downside is, the Milestone X2 came with 2.3.6. There's no earlier version to go on with this phone. Can I go back to a stock version?
How to root motorola defy+ 2.3.6 ?
Doomlord , gingerbreak and superoneclick doesn't work .
After upgrading my defy successfuly to cyanogenmod9, I cant access the internal memory of the phone through the computer. when I choose the "portal" option in the usb connections, the computer does the "beep" sound when theres a new hardwear plugged to it, but I can't access it.
How can I transfer files, like music, into folders in the internal storage?
Is there any way to change soft key actions like MENU key to open app drawer.No launcher provide the feature to change menu key action. Is there any way to do it?
View 5 Replies View RelatedIm Using My Motorola Defy + I Have Used If About 1 Year Now But For about 3 Days Ago Something Happend. I Had Some Fun With A Cheat Called FreeDom.
Then Like 3 Hours Later I Stopped Use It And I Was Playing CrimeCity For About 2 Hours. Then I Stopped Played And Like 1 Hour Later My Friend Said To Me Something "have you tryed the App called " Steam " Its Exactly As The Program For Your Computer But On Your Android.
So I Were Going To Download That App And Something Happend I Opened Google Play And It Said " No connection " Retry? And I Saw That The Wifi Bar Was Grey I Tryed Everything Factory Reset Change Time ...
I Can Enter Google And Enter Youtube But Not Use The Other Things Like Google Play Log In On An Google Account or Something...
Device: Motorola Defy Plus
Android Version: 4.0.4
Cyanogen mod : 9
Its Rooted
How do you root Motorola DEFY XT with Gingerbread 2.3.7 on it? it is on the new Republic Network.
View 1 Replies View Relateddoes the LG Optimus Net Supports CM10.2 Unoffcial Or Not?
View 1 Replies View RelatedI want to restore official Xperia S ROM, but I need to relock my bootloader (or maybe not ), so can I do this on CM10 ROM, which needs to have unlocked boot loader?
View 1 Replies View Relatedhow can i enable the navbar in CM10? Because the developer of CM10 for the HTC Sensation doesn't like it, so i have to enable it by myself.
View 2 Replies View Relatedi want to compile a rom for lg p690 from source which guide will be best for it
View 2 Replies View RelatedIf the cm10.2 is using the new android 4.3 dialer app? or the cm10.1?
View 1 Replies View RelatedI an trying to change my MAC address on my Nexus S running cyanogenmod 10 on android 4.1.2. I found some tutorials but the files can't be found in cm10. I also tried apps like Mac address changer but none work.
View 9 Replies View RelatedSo, I've been using CM9 for a while and I want to jump to CM10 nightlies. My question is that if I don't like CM10 for any reason can I just use the backup I made(before going to CM10) to go back to CM9, or do I have to Odin back.........?
View 4 Replies View RelatedI used CM10.1 for a while on my I9000B and decided to go back to stock gingerbread firmware so I installed a full stock rom with odin. Now I want to go back to CM10.1again but this darn thing will not boot at all. No matter what I do the phone takes me to CWM right after powering it up. This did not happen before when I first upgraded to CM10.1 a few months ago.What could possibly be going wrong now?
View 6 Replies View Relatedtried usin CM10 on my S3 but any Gameloft game doest work..
View 4 Replies View RelatedI have updated my international HTC One X to CM10 ver(10-20121221 NIGHTLY). However, i find that the GPS doesn't pickup any satellites at all.
I went back to my stock ROM and found that the GPS was working fine. On reading some threads about similar problems, i tried downloading AGPS data but that too did not work. I also flashed a AGPS Fix for HTC One X ver3.1 but that too didn't work.
I want to change the icons on cm10 but without using a different launcher. I use Desktop Visualizer but it doesnt change the icon anywhere other than the homescreen. I actually just want to add my own icons into the apk while keeping the stock theme.
View 5 Replies View Relatedhow to get ride of the dim player on cm10 lockscreen because when I use colour fill and slide it to 100% transparency the dim layer prevents it from being 100% transparent. how to decompile an apk/jar.
View 3 Replies View RelatedIs it possible two combine to cm10.1 themes? I want to take the battery icons from one theme an ported to another... I've tried opening the apks with 7zip , copying the png from one theme to another, then sign the apk, installed, worked fine but the icons doesn't show, only the default ones. Can this be done?
View 2 Replies View RelatedI'm trying to port CM10.1 to a new device. Currently I got a successful build with fully working recovery. The rom actually doesn't boot. As far as I can see from the log it fails on SurfaceFlinger.
View 1 Replies View RelatedSo, like I have been reading all throughout the forums, sometimes other users have ran into the issue where the IMEI is 0.
Now, I hear injecting the IMEI is an option, but I am unable to find a method how to do this.
I attempted to follow a video where a user goes through several steps, such as this video
[URL]
but I am stuck on step 2 where I have to dial *#7284#. I get the error message "Connection Problem or invalid MMI code" so I cannot proceed any further.
Phone is SGH-I747M
I'm looking for a way (ANY WAY) to move apps or at least their data to SD card on cyanogenmod 10.1 and to be specific on a samsung galaxy note 2 ..
I have tried DirectoryBind but it seems to be not working on CM10.1 (it works on touchwiz perfectly)
Also I tried swapping memories (internal to external and vice versa) , it worked but installing apps from external sources will not work, or apps in /storage/emulated/0/... Will not be able to installed , but if they are on /storage/sdcard1 they will be able to be installed.. That still a problem ..
So any way of moving apps to SD on CM10.1 ?
I have a 16Gb Nook Tablet that I wiped a long time ago and put CM7 on it. It worked great. Then I put CM9 on it, and it worked great. Then I tried to put CM10 on it. So far, no matter what build I try for CM10.0 or CM10.1, it has the exact same result: After I do the final reboot, it starts to boot up, but gives up and just shuts down (screen goes black, and you have to turn on the device again). Sometimes the CM10 logo starts spinning before it turns off, sometimes it turns off before the spinning CM10 boot logo appears.
I've tried many different builds (only for the Nook Tablet), but they all behave the same (some from the official cyanogenmod web site, some from other xda-developer forum posts for the Nook Tablet).
So, I just flashed the CM10 nightly for the Samsung Epic 4g [URL] and I am stuck on the boot screen. I am on CWM 6.0.1.1....
View 3 Replies View RelatedI try to fix these problems after compiled CWM for my device.
1 ) Touchscreen turned into touchpad.
2 ) Notification bar missing.
3 ) Softkey navigation missing
I had added 'qemu.hw.mainkeys=0' to build.prop
Is it possible to call screen of cm10 or 10.1 can appear more like miui call screen? I mean transparent. The default caller screen of cm10 is not good. Caller photo almost covered by black screen. You can't see the photo. In miui the caller screen is fully transparent it looks damn nice. So is there any modified apk or any way to make it transparent? Other than using third party app.
View 2 Replies View RelatedI want to change statusbar clock color how i can change.?
View 9 Replies View Relatedi have installed CM 1.0.2 with android 4.3.1 on my huawei ascend p1/u9200 device ... but WIFI is not working !!!
i can turn on or turn of it , but it can't find any access points !!
one of my friends said wipe cache and davilk and reinstall the rom , i did that but WIFI still is not working ...