General :: Volume Key Not Responding
May 9, 2013
My volume key and power key randomly stopped working. I took the battery out, and restarted it, and went into safe mode. I read that I should uninstall recent apps, so I did, and my phone started working normally. The power key now works, but the volume key is slow to respond. I have to press it multiple times before the volume slider comes onto the screen and actually responds. When I control the volume using the slider, it starts moving randomly, and when it gets to max volume, it slides back down to vibrate on its own, and it takes a few seconds before the slider disappears. I don't think it's a hardware issue. Also, I don't know too much about phones.
View 1 Replies
May 21, 2014
Recently purchased the Virgin Mobile Supreme (Sprint Vital, ZTE N9810). The one thing that is bothering me is that there is only one volume setting for the combined ringtone and notifications. I would like to set these volumes separately.
I tried one volume control tool, but even though it had 'separate' controls changing ringtone changed notification and vice versa.
View 2 Replies
View Related
Apr 29, 2014
so my HTC One X's touch screen is totally unresponsive. Everything else is working fine and I'm still getting messages and notifications (and my alarms are going off), but I can't get to any of it. I've backed it up and tried to do a hard reset, but holding down the volume down + power button is just taking a screenshot and then restarting. I can't do it through settings as the touch screen is not working.
View 1 Replies
View Related
Oct 12, 2013
i have downloaded CM Mod for A13 and installed it but the touch is not responding .. trying to flash the ts batchs but doesn't work .find my TS model and tell me if i am doing something wrong ..
my tablet model is / inet 86ve rev01 zeng-gc 2012-12-06 / i found these under the back cover of my tablet and wrote it couse my brand doesnt exist on the internet.
View 1 Replies
View Related
Apr 4, 2013
I have aoson M19 tablet and I forget my password
I download the latest firmware ICS 4 from szaoson.com and download the flash tool from the same site, then I did the below:
1 - I connect the tablet to the laptop and the tool identified the tablet.
2 - I select the firmware.
3 - I clicked on upgrade button but I got an error "Check chip Fail".
4 - I clicked on the restore button and I got the same error.
now, the device is not turning on I cannot see anything in the screen BUT I can connect to the tool.
View 3 Replies
View Related
Jan 14, 2014
it is struck after boot and says Process android.process.media is not responding. i cant click wait or ok. my phone is SGS Duos GT-S7562, rooted and usb debugging is enabled.
View 4 Replies
View Related
Apr 17, 2013
Whenever I go to plug my phone into my computer to connect to Kies, a message comes up saying: "Notification: Device not responding". I have a Samsung Galaxy S2X and am connecting to a Macbook.
View 2 Replies
View Related
Apr 17, 2013
The touchscreen is not responding randomly the device itself is functioning fine but the screen is not use-able. The simple turn off and on the screen fix the problem for a few minutes but then again is not working, and is frozen in the lock screen so i have to do the off/on trick few times to make it responsive. I tried the stock rom the modaco rom and now i am using AOSP JELLY BEAN 4.2.2_r1 but it is all the same. Every time i flashed a rom i did the full wipe. Sometimes is even frozen in recovery mode. It aIso sometimes reboot when it get frozen. I have 1.4a loader and i tried with all the twrp versions now i am on 2.5
View 2 Replies
View Related
Jul 31, 2013
i bought lg nexus 4, 2 weeks ago and today i received a notification to update my android version to android 4.3 .. Then i installed it and my mobile is rebooted, then i just opened it and when i click on the locker, it doesn't respond and the touch is off
View 1 Replies
View Related
Apr 6, 2013
Few days ago I changed ROM to newest Kyrillos version in my Ace II and I saw that radio don't work correctly.
When I turn on the radio first time after rebooting it works fine and I haven't got problem, but when I set off radio and I want to start listening radio again it doesn't start playing, all the time on the top is an information that radio is "Turning on" and phone starts lagging. After about 30 seconds system says that FM Radio isn't responding and it is asking me if I want to close it. Before, when I had Android 2.3.6 and Kyrillos ROM for this version, I hadn't got any problems with FM Radio.
Link to ROM: [URL] .....
View 1 Replies
View Related
Apr 2, 2013
I am having big troubles with the touch screen of my Samsung Galaxy Exhibit II. Everything worked smooth since 1 year, and 2 days ago suddenly the touch screen stop responding. The phone works, I receive calls but I cannot answer since I cannot swipe. All the side button works, but the front button on the screen (menu, option, back and search buttons) do not work at all. I tried to reboot but nothing. I took sim, battery and microSD out for one entire night and then rebooted in the morning (without sim and microSD) but nothing. I also rebooted the same morning with sim and microSD but nothing. I ended up to try a factory reset even if I dont have a backup but I figured out I cannot do it because when I reboot and press volume up and power button then I cannot press the menu bottom when I see the robot with the box since the menu bottom does not respond!
View 9 Replies
View Related
Apr 17, 2013
Recently I soft bricked my Arc S.It was Rooted and Bootloader unlocked. Running well so I got bored and tried to load a custom rom. Failed! Not worried tried to reflash. Failed!Sent it off to an IT store they were able to get it up and running. On 4.1.b.0.431.BUT now no matter what rooting tool or method I try I can't root it. Bootloader says unlocked.
Tried Doomlords toolkit And 3 others ways.... nothing...Should I try lock the Bootloader again? Or Reflash the whole phone again?? (which I am no good at hence the whole problem)
View 1 Replies
View Related
Jun 2, 2012
I just install this rom. It's amazing smooth. I have some problem when I play HD 3d Games. The game crashed and not responding. I've tried to move to sd card. Same crash, then reinstall via root explorer, its Same. (asphalt6, x-plane, reckless racing n some application).
Is it incompatibility with ics or graphic issue?
View 1 Replies
View Related
Sep 6, 2013
So I was trying to edit the buttons on my Tmo Galaxy S3 (with AOKP Milestone 2) and accidentally broke all of them. They don't respond at all now.
I went into system/usr/keylayout. I copied the files to my sd card. Then I edited them (I also kept a backup of the old files). When I was finished I went back to the system/user/keylayout section and pasted the new files. As soon as I exited the file browser my phone reset itself. When the phone came back on none of the keys worked.
So I deleted the files I put in, and replaced them with the old files that were there before (using pie controls to navigate). I reset my phone using the app Quick Boot because I heard you have to reboot your phone in order for the new software coding to take effect. But still none of the hardware keys work.
I don't understand. All of the original files are there now. I'm afraid to let my phone die or to even turn it off because I don't know if the power button will work anymore. To wake up my phone I have to plug it into the charger and then use pie controls to navigate. get the hardware keys back to the way they were?
View 2 Replies
View Related
Mar 20, 2013
Every time i click on the play store icon it looks like it starts to open then before the page could even load it closes and if i do it enough times it says sorry play store isnt responding... Whenever i restart my phone this message pops up, unfortunately, the processcom.google.gapps has stopped
View 24 Replies
View Related
Jan 27, 2013
I am working on an app that uses a GoogleMap and lots of overlays/markers. Controls and navigation is handled automatically (no direct user interaction with the map needed so far).
Things work the way I want right until the app pauses and goes into the background. When I resume the app the map has zoomed out to 0:0 and it doesn't react to animateMap or anything anymore. I can't seem to figure how I get it back to the state where it doesn't react to user interaction and actually updates with my markers and stuff..
Below are the three methods handling the map, and it doesn't seem to react on any of it after a resume.
Code:
private void setupMap(){
getSupportFragmentManager().beginTransaction().replace(R.id.trackeractivity_map, new SupportMapFragment()).commit();
FragmentManager fragmentManager = getSupportFragmentManager();
SupportMapFragment supportMapFragment = (SupportMapFragment) fragmentManager.findFragmentById(R.id.trackeractivity_map);
[Code] .....
View 2 Replies
View Related
Jan 13, 2014
My phone touch stops responding after using it for some time after locking screen .
Micromax A26
View 1 Replies
View Related
Feb 22, 2014
The stock email app for my GS4 was working fine until today. Now every time I try to send an email out or reply to an email the app just freezes and the screen goes black and then when you press the power button it takes me back to the lock screen and you can't swipe to unlock for about a few seconds. then I get a message that the app is not responding. How do I fix this? I tried restarting my phone and clearing the cache but still no luck.
View 1 Replies
View Related
Aug 27, 2013
Recently i downloaded some old app (Quadrapop from SE xperia) , It loads fine but when i have to choose my language it just don't respond to my touches .I installed it on my Galaxy s2 i9100 , then on table -same thing on both
I can send apk file if needed.
View 3 Replies
View Related
Jul 12, 2013
i tried flashing and rooting using this thread: URL....but all went wrong when i flashed the kernel using flash mode. Im using a sony ericsson live with walkman. Using falshtool 0.9.11.0 all was fined. it displayed flashing done.
then i followed the steps then tried to root it. but couldn't as it in the command prompt it kept waiting for my device and sometimes displayed daemon tools load successfully. my phone screen remained black and was not responding.when i connect it to my pc it seemed it is not recognized but makes the sound when something is connected to the pc. i am unable to use my phone.i think there is the problem with the adb.i just dont get it well. i cant updat the sm bus driver..when i try to reflash it and re plug via cable it display:
12/043/2013 13:43:18 - INFO - <- This level is successfully initialized
12/043/2013 13:43:18 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
12/043/2013 13:43:19 - INFO - Device disconnected
12/044/2013 13:44:06 - INFO - Device connected with USB debugging off
12/044/2013 13:44:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
View 1 Replies
View Related
Oct 2, 2012
My aunt gave me a Samsung Galaxy S2 and everything was fine, except that it didn't let me register to the network. The next day it told me that it had to do an update so I did the update. After the update the home screen turned black and pressing the buttons didn't do anything. After a while an error pops up saying "application is not responding" and then the screen just stays black. The top bar works just fine and I can even go on the internet, play games, practically do everything. I did a factory reset by pressing Volume up + Home + Power 3 times already, but the only thing that changed is that the language turned into German.. the screen stays black. It had nothing to do with Rooting or Flashing, because I don't even know what that is.
View 2 Replies
View Related
Mar 17, 2012
I have put any files OUT KITCHEN into the rom.zip and install this rom with recovery.
then my phone while rebooting has appeared an error "process system is not responding,force close or wait"
My phone couldn't display to main screen. I also not be installed RUU ( relocked bootloader),always error...
I'm using Htc explorer.
View 1 Replies
View Related
Jun 19, 2013
i have rooted my Samsung Galaxy y duos lite[GT-S5302] , and installed jellybean 4.2 , i could not connect my device to computer and even Samsung kies displays : device is taking long time fo responding , how to reinstall 2.3.6 gingerbread ? or any other options?
View 8 Replies
View Related
Nov 22, 2010
I'm writing an Android application that plays back voice mails using Media Player, which are just WAV files that have been sent to the device. When I play the file, it's played on the device's speaker, or else it plays through headphones if they're plugged in. What I want to do is play the file so that it sounds to the user as if it's at the same volume level as a normal phone call. Is there a way to route playback so that the file is played through the phone's ear piece instead of out of the speaker?
View 2 Replies
View Related
Jan 6, 2010
Is there any way to disable the volume control button as it works on the ringer volume? I use locale, but I bump those buttons often enough and turn the ringer off completely.
View 27 Replies
View Related
Jul 17, 2010
I noticed that when turning down the volume of the ringer with the volume rocker it doesn't automatically turn down the notification volume as well. Is there a way to set the volume rocker to adjust both notification and ringer volume to the same level? You can test this by going under Settings/Sound and Display/Ringer Volume...and try adjusting the volume with the rocker and it only adjust the Ringer Volume.
View 2 Replies
View Related
Apr 16, 2014
I have Android 4.2 on my mobile phone which I have bought recently.
Everything is running fine on my phone so far but with the exception of my clock's alarm volume.
For example:I set the alarm volume to max, I go and set my clock alarm to ring and when the alarm rings the volume is set to very low.When I check back to verify the volume, the volume is set to very low. I am very sure that I have set it to max though.
I have tried to reset my phone to factory settings, it didn't work..
View 1 Replies
View Related
Oct 12, 2010
On one page of my app there are sounds. Is there a line of code to allow the volume up/down buttons to switch to media volume control for that page of the app only? Or do I need to set it for the entire app, and how do I do that?
View 4 Replies
View Related
Apr 30, 2010
I don't know if it's from some app I installed or what. But I noticed recently that suddenly the volume rocker only controls the Media Volume or the In-call volume (if you're in a call), not the Ringer Volume. I don't have anything playing, so not sure why it's like that. I want it to default to ringer and I'll worry about Media when I'm actually in a program that uses it.
View 3 Replies
View Related
May 5, 2010
My dad somehow changed his volume control, so it only affects the media volume. Any clue on how to change it back? Instead of Ringer Volume, it says Media Volume on the box that pops up when pressing the volume controls.
View 2 Replies
View Related
