General :: Using Firmware With Different DBT CSC File?
Feb 17, 2012
I currently have a i9001 using Android 2.3.3 with baseband version I9001XXKF8 and am planning to flash with the newer I9001XXKQ1 version since there is no official 2.3.6 update for my region.
My current firmware I use has the South African CSC files(I9001OJCKF3) but the newer firmware uses the German CSC(I9001DBTKP1). My phone is not sim-locked.
If I flash to the newer firmware would that 'brick' the device? If I backup my current CSC files from /root/system/csc would I be able to restore these onto the newer firmware? If so would replacing these require factory reset or any such thing?
These are my CSC files: [URL]
View 1 Replies
Jan 26, 2014
I'm stuck inside a bootloop after rooting my Device , The system.img.gz I applied, wasn't suiting to my firmware version , I have tablet Iconia B1-711
I cannot find any firmware zip file.
View 2 Replies
View Related
Nov 26, 2012
Quick question: Where in the .pkg update package is the information on the build and the version of the update? I sort of screwed up my tablet, I can boot into stock recovery but not much more. ADB won't work, and AFAIK nobody knows how to enter fastboot mode on this thing. Hence, I figured that the only way to reinstall the ROM is to trick recovery into installing an update package that's already installed.
The tablet is Fujitsu STYLISTIC M532.
View 9 Replies
View Related
Jun 21, 2010
I had just installed the new 100 Mb ROM, and after restart, I had to go through all the usual setiings etc., during which it popped up with a message about the new firmware. I chose "Install later" because I was in the middle of the initial configuration. The question now is: How do I restart installation of the 4 Mb firmware file?
View 1 Replies
View Related
Sep 1, 2010
What I did was create two .java files. One that can compile and run on a 1.5 phone (SDK3) and then one that works on 2.0(SDK5) So for this example i'll call the 1.5 file ExampleOld and the new one Example. I was wondering if i just made activity like this if it would work sort of like a "portal" and pick the activity to load depending on the SDK so there is no crash or compile errors. Are there any changes I should make to my code? Maybe anyone out there that's had to do this before.
CODE:.................................
View 2 Replies
View Related
Oct 3, 2010
Pls advise me the best unofficial firmware update to download. Froyo based.
View 4 Replies
View Related
Mar 2, 2010
The version of the software that is most current is version 6 (the phone shipped with version 3).
To ascertain version: Go to Dialer/Hit Star/#9999#
You will see the PDA; Phone; and Software Version numbers in this section
The T939xxxx6 for PDA AND PHONE and then
Software Version - ending in .006 on the last line.
I was told that the reason that I keep seeing the "No update file exists" message when I check "update firmware" is because I have the latest version.
At some point my phone was updated without giving me a message. I did notice the red and blue arrows yesterday. But there was no message. My SD card mounted and dismounted on its own and gave an error message, and then all references to the error and SD card disappeared.
If your phone is/has exhibited this sort of behavior, you may already have the update.
View 49 Replies
View Related
Nov 8, 2013
I have a HTC One unlocked and rooted. I have flashed a custom ROM software num - 3.22.1540.1. I'm trying to unroot and return to stock.
On the fastboot info is- M7_UL PVT SHIP S-ON RH HBOOT-1.54.0000 RADIO-4A.17.3250.14 OpenDSP-V31.120.274.0617 OS- eMMC-BOOT 2048MB
Why don't I have an OS number? I don't know which RUU to download?
View 1 Replies
View Related
Oct 31, 2012
I know about the firmwares like - ICS , Gingerbread or JellyBean
But What is Custom ROM Firmware
View 1 Replies
View Related
Mar 26, 2014
I have a problem for a few days. The story is that I installed Custom ROM and it stop asking for unlock code when I insert a new carrier sim card. Somebody told me to restore to Stock Firmware. I used "KDS Firmware Update" to push Stock Firmware from my PC but when the phone restart to install Stock Firmware, Custom Recovery Mode appear instead of Stock Recovery Mode. As the result, it failed to install.
I'm looking for a way to restore Stock Recovery Mode but I found nothing. Now, how to do it or give me the Stock Recovery Image zip for my LG Optimus G E973.
View 3 Replies
View Related
Jan 21, 2012
how to stop the annoying media scan on this Galaxy S Captivate, which included tutorials on rooting and getting sdk files.
Now I would like to upgrade to the latest firmware. I found out that I needed something called Kies, so I downloaded it and followed the instructions - hooked up the phone after checking debugging, etc, but I got an error that said I don't have authorization or something. I started researching a bit, but got quickly overwhelmed with things I'd never heard of like "Odin".
View 1 Replies
View Related
May 31, 2014
I'm definitely a newbie with Android. Today, I looked online for overclocking my LG Optimus F3, and I found this thread "[MS659][F3] Freedom Kernel Overclocked" (I'm a newbie xda won't let me post links yet). It said you could achieve a 1.4 GHz overclock (my device has a 1.2 GHz processor). So, dummy me, I got all excited and flashed the MS65910c firmware to my phone like the thread said I needed to have (I didn't know that that would switch my service providers as I had Virgin Mobile). So, I'm a little confused still... Can I still have Virgin Mobile service with MetroPCS firmware? If not, I want to restore my device back to Virgin Mobile firmware (LS720ZV6). The problem is, I am also a little confused with the flashing firmware thing. Can I flash .zip files instead of .kdz files (I couldn't find LS720ZV6 .kdz firmware files on the web)?
View 3 Replies
View Related
Nov 20, 2012
I bought an android tv box (cynmate) with anrdoid 4 OS..Is there a way to change the firmware or reinstall the icecream edition?
View 1 Replies
View Related
Feb 19, 2013
My tablet is a JXD P300 with Android 4.0.4. Tetando set the external SD card as internal SD did some wrong procedure even went to settings and turned off the internal SD card. And now the tablet is stopped on the first home screen. Looking for firmware for it?
View 2 Replies
View Related
Feb 20, 2012
How to extract a firmware from a tablet?
View 2 Replies
View Related
Nov 6, 2013
What is the AOKP Firmware exactly means ??!!
View 4 Replies
View Related
Jun 22, 2013
My phone(Samsung Galaxy GT-B5510 (Galaxy Y Pro/Galaxy TXT)) was totally bricked, I couldn't turn wifi on, nothing worked.After I searched some forums I found how to un-brick it by loading the original firmware.
I live in Belgium, and I couldn't find a firmware with the Belgian CSC("PRO"), so I used a Netherlandish-one.Everything went fine and I can use my phone again, everything works, except that the AZERTY-keyboard functions as a QWERTY-one(the default for Netherlands).
Anyways, my phone works fine without a SIM-card. Whenever I try to boot my phone with a SIM inserted, it gets stuck in a bootloop, showing the Samsung-image for about 15 seconds and then rebooting and so on.
So after I thought a bit, I figured out the problem must be that I'm not using a Belgian CSC (my SIM is from Belgium too).
I tried restoring my phone with Samsung Kies, but whenever I click Start upgrade, I get a Chinese error.
However, I have found the location where Kies downloaded the firmware, and the firmware is with a PRO-csc(the one I need), it's located in
C:Users{me}AppDataTempBinaryGT-B5510.
So I tried flashing this Kies-firmware with ODIN, but the problem is that the Kies-firmware has no extension(no .tar.md5 or whatever), so I can't import it with ODIN.What do I do?
View 7 Replies
View Related
Jun 15, 2013
i want to ask u all dat can i use any firmware for my amaze tab .. its model name is mtk 6575 so can i use any firmware of mtk 6575 in it .. i recently have bricked it. provide me a way to unbrick it.
View 1 Replies
View Related
Mar 5, 2013
I'm trying to repack firmware for MK808 and add the XBMC XAF version apk there. I want the XBMC to be preloaded by default after user flashes the firmware into MK808.
View 1 Replies
View Related
Nov 17, 2012
One thing that bothers me about my Android phone is the opaque, closed-source baseband firmware ("radio" as it's often called here). Since the baseband is interposed between the OS and most hardware functions, its firmware presents a major unknown in the total security of the device.
It's unlikely that the source code for any of this baseband firmware is going to be released, and the open source OsmocomBB baseband is a long way off from supporting Android or the dominant Qualcomm chips. But I would settle for decompiling an existing baseband firmware image, so that I can start to understand some things about it's behavior, and perhaps compile modified versions.
View 5 Replies
View Related
May 16, 2013
Here's my situation. I have 5 tablets and all being Acer A200's. One of them works fine, but the other four are stuck on the acer logo.
There is NO support for these tablets anymore, no honeycomb roms available to download, etc.
Is there any way that I can basically copy the whole rom/bootloader that's on the working A200, and put it on all the other tablets?
View 1 Replies
View Related
Feb 25, 2014
i previously Flashed a custom OS onto my phone, Cyanogen Mod 11, when i got bored of it i decided to download the Stock touchwiz android for my Samsung Galaxy S4 i9505, i proceeded to download Odin307, once i had the OS and Odin i opened Odin in Administrator, i choose my file which was extracted and i used the PDA option to choose it, all was fine until it encountered this error (<ID:0/006> Complete(Write) operation failed.)
once that failed i tried to boot the phone where it says "Firmware upgrade encountered an issue. please select recovery mode ion Kies and try again" SO basically i can still get into the Download mode and can get to the Firmware upgrade error screen, that is all, is there a way to fix it? ive tried countless times to flash the stock touchwiz but get the same error message on odin!
View 3 Replies
View Related
Nov 10, 2013
How to upgrade firmware using Linux. I ask because it seems that all firmware upgrade downloads are pitched to windows.
View 1 Replies
View Related
Oct 27, 2011
I'm looking for the stock firmware for the Telecom New Zealand i9100T. I tried searching the other threads relating to this but it hasn't been posted yet.
The phone is: I9100TD0KH1-CL443486root@DELL141 #2
View 1 Replies
View Related
Oct 8, 2012
Let's say you don't have internet access at the moment. Let's say all you have is fresh install of CyanogenMod 9, which for some reason, does not come with a File Manager :
Let's say you have an apk file on your SD card. How would you install the apk file? Terminal emulator, using which commands or another way?
By the way, ASTRO File Manager vs. ES File Explorer, which one and why?
View 8 Replies
View Related
Apr 3, 2013
I'm using JB 1.4.2 on Razr i. There's one thing that's annoying me a lot. I've installed the SNES Emulator SuperGNES and I've found that every single file type that have no app associated is showing SuperGNES icon and associated with it. Example: .log, .db, etc. Even files that have no extension is associated with it. The same problem occur when ZArchiver is installed. I don't know if it's a bug of these two apps or Android's in general. Remembering that this associations are shown only inside Android's native file manager. It's like every "unknown MIME type file" act like being the same.
View 6 Replies
View Related
Oct 3, 2013
I'm not sure what I must've done. But nevertheless my stock Touchwiz firmware from my Galaxy S3 is gone. I must've deleted it while doing a factory reset, because my play store was acting up.
I would like to flash back to stock Touchwiz on my phone but when I looked for it on ROM Manager and in recovery all my previous backups were gone. So I was wondering if there is a way to get my stock firmware back or maybe even retrieve it from my phone from someplace it could be hiding.
Some more info: I am running CyanogenMod 10.1.3 and rooted with clockwork mod. This is on my Samsung Galaxy S3. And I am with T-Mobile on a contract in the United States.
View 4 Replies
View Related
Feb 15, 2014
I updated my phone earlier today to jelly bean 4.3. Since then, I have stopped receiving network. The EMEI number doesn't show in the device info either. Tried restarting, taking out the sim card and putting it back in. Nothing works. It says this right after restarting, "currently unable to download, try again later". I bought my phone from Qatar and I am currently using it in UK (t-mobile) if that makes any difference, but it was working perfectly fine before.
View 1 Replies
View Related
Oct 1, 2012
I downloaded an official firmware of my samsung galaxy s plus from [URL].... .I want to see some of its stock apps and I have no clue how to do it.I've tried opening recovery.img with rar or iso but still nothing.It wouldn't let me open the .image file.So how am I suppose to open it?
View 2 Replies
View Related
Jul 18, 2013
Stock firmware zip that can be flashed in stock recovery? I messed up some system files and can't get back into android.
View 9 Replies
View Related
