I've an annoying issue on my THL W100...simply it doesn't viber!
I've checked all the settings of course, changed some roms (official and ro.edi), downloaded some test apps, nothing.
I've disassembled it, but i can't find the viber engine, maybe is missing?
View 3 Replies
I have so far found two bugs in Galaxo 1.6.3:
a) Speaker doesn't work in call (very weak). works well in ringtones etc.
b) Scrolling contacts by letter doesn't work.
Other than that this is a leap forward, especially with the overclock options!
Both bugs, as well as others, fixed in 1.6.3.1 update!
When I try to access the camera (from any app) I get a message says Cant connect to camera. I already tried different roms. once a while the camera return. I cant get what is the problem. I tried different solutions from other threads in the forum, but nothing ).I use the official rom.
View 9 Replies View RelatedHow to make Viber and Tango (both chat app) work for multi window mode on Galaxy Note 3?
I tried Viber and Tango, Both doesn't open multi window or support any. I know it can't be open two of them on the same window but it should be open with other apps on the same window on Galaxy Note 3. Some other apps like Chaton, Youtube can be open two windows on the same screen ( it has two split windows so you can watch two different youtube on the one window. For example, you can open two differnt snow boarders on one window and compare them. It is awesome.). Multi window mode works with other apps fine.
I flashed a THL W100 with sp tool and stupidly left the preloader checked, it finished all good and show me the green circle, but now it wont boot up and when i try to flash with any w100 rom it says the rom is not compatible with this device..
View 5 Replies View Related my device called CHERRY MOBILE W100 with the following specs:
CPU: 1ghz snapdragon qualcomm (245.76-1008.0Mhz)
ARMv7 Processor rev1(v7)
Cores1
Architecture: 7
BogoMIPS: 398.67
Hardware: QRD MSM7x27a SKU3
Revision: 1
Screen resolution: 320 x 480
3.5 screen
IPS display
GPU Vendor: Qualcomm
GPU Renderer: Adreno (TM) 200
GPU Version: OpenGL ES 2.0
Memory size:512 ROM 512 RAM
I tried to root it through Unlockroot, Z4Root and 1click root tools but failed...
When I used my android phone before, the USB storage worked fine. But later, my android phone didn't work and I tried to restore the memory, blow on the two ends of the USB cable, checked on the SD card and blowed on my USB slot and the phones slot.I tried to look up for who had this problem too and someone said about installing kies. After when I installed kies, I found out it is just for transfering files over wifi but I didn't want that.
View 1 Replies View RelatedWhen i set the LED light to blink it does not work.
View 5 Replies View RelatedMy phone's usb works pretty much perfect, adb and the usb storage are working (HTC One M7). But when i do "adb reboot-bootloader" the pc just says "the usb device fails to enumerate or something like that. Everything works except for Fastboot and i dont know why. Has it something to do with Win 8.1? I never tried it on another machine before.
View 1 Replies View RelatedI just want to understand why a lot of games, how Spider-man, PVZ ( Plants Vs. Zombies ) and others doesn't work on ICS.
I tried to install in 2 different devices ( Galaxy S II and Droid Razr ) and in the both cases have an FC.
Recently purchased Xolo A500, I have been trying to build CWM in [url]....but nothing works.
I have tried three times but none works.
Provided with a custom recovery.fstab but still wont work.
I can provide the stock recovery.img
BTW, in recovery.fstab provided in builder.clockworkmod.com after it has finished the build the list is
# mount points fstype device [device2]
/boot mtd boot[url]....
Has my recovery.fstab got any errors???
The online CWM builder doesn't work???
i have a problem with this application, my friend today in school tell me about that application and i downloaded it free from google play product, when i installed it i run it, i have rooted my android already my version is 2.2.2, i started application and my friend telled me that i need to install driver when i install driver i run again but then i got problem, he just show me in second black screen and boop exit, i dont now what to do? I reinstall several times but nothing, i want this application because i think i can play some games with Chainfire 3d that i before cant play.
View 2 Replies View RelatedWe have several android devices in the family and only one bluetooth mouse/keyboard. we prefer joining the tablets with hard peripherals when not on the go.
Here's the problem: one of the tablets' screen is burnt out so I have it plugged into a television via hdmi. I can look at the tv to estimate where to touch the tablet to sync up the bluetooth peripherals, but it's tedious and takes too long. We're swapping the bluetooth peripherals constantly so it would be better if the tablet "remembered" the bluetooth devices and didn't need to be paired each time. I realize that bluetooth doesn't work that way, but there has to be a way to do this, or a better way at least.
I'm trying out both the Galaxy S3 and the LG Nexus 4 on AT&T.
When I was using the S3, I just inserted my SIM card and I was good to go. I like to use the Speedtest app when I'm out and about to see what speeds I'm getting, and the app worked just fine on the S3.
Last week, I got the LG Nexus 4 and inserted the SIM card and was also up and running. However, the Speedtest app does not work out in the field. It works just fine on my WiFi network but, when I try it outside, it just gives a large ping number and then does nothing. I tried uninstalling/reinstalling the Speedtest app, but still nothing.
I don't know why but my google sync stopped. I used to have this several times a day the last days but now it seems to be permanent.
View 2 Replies View RelatedI have a problem with my chinese generic tablet:
Model: Mahdi M6
Android: 4.0.3
Led: Blue[url]...
My girlfriend dropped a glass of soda on it, I could clean and dry all now works perfectly the screen, but the touch screen stopped walking.
I wanted to get into recovery mode (Vol Up + Power) but I get an android with a red triangle and did not display any options.Get the manufacturer to install ROM from SD but since I can not go into recovery mode I find it impossible.Know it's a generic Chinese tablet but how I could do to get it working again.
I'm having issues with Internet. Google sign-in, Facebook sign-in, Twitter etc I can't go to Google Play for the first time i.e. Accept screen then I can use WiFi to work. nothing works with WiFi if I connect the Data it works. But in browser http sites works fine.
I'm using a Belkin router. I tried 3 different Android's same problem. I tried using Google DNS address still no go. I updated the Routers firmware as well.
Why the Facebook tab gets an error message each time I try to log in through Executive Assistant? I have an Evo Design.
View 3 Replies View RelatedLike 2 weeks ago this problem first started, first it would go to the navigator app when I pressed the home button..I force killed navigator and it fixed itself, sometimes it wouldnt work but most of the time when i pressed hom ei went home.
i have to press back like 40 times to get home.
i can't use my phone properly.
i tried a hard reset, formatted SD card
i have stock 2.1 hero downloaded the update today, but i had this problem likebefore the update but it wasn't as bad. if i could go back to the old verison like whatever was released today, the one before it that would be cool..
But my microphone for the HTC One SV doesn't work outside phone calls or the default voice recording program. Other programs like Skype or TinyChat don't seem to be picking up the microphone, I can receive sound from others just fine. But they can't hear me for some reason.
View 1 Replies View RelatedI'm having a problem with my Paladin. I bought USB OTG cable and it look's like it doesn't work. When I connect any of 3 pendrives only one will blink but still no result in tablet.
I've tried running it many times but without luck. USB OTG Helper shows theres No Drives Found!. I saw person got it working: [URL] .... but I cannot understand, how to get it to work ?
I ported paranoid android from the desire HD to the thunderbolt and almost everything works fine except for the mic and speaker during calls. I have tried everything I can think of with my limited knowledge and was putting this here to see if some more seasoned devs may provide some insight. I'm hoping like hell this isn't kernel related but I seriously doubt it is. Data works fine and so does mms/SMS. I did have to port the ril from our limited ics roms we have to get data.
View 7 Replies View RelatedATM i am using SG2 with ICS 4.0.3.
2 months ago before it upgraded itselve to curent version i instaled latest navigon without problems and it work pretty well. Since ICS is upgraded navigon doesen't work anymore. I tryed to DLL latest version of Navigon ( 4.1.1 ) and it doesent wan't to work. I can install it but when i open it up i get an error that im not connected to an internet connection or im not loged in to google play. my WI-FI is on and it don't want to work.
I have a rooted Nexus 5 with stock rom.
I tried to use xposed module "flying android", it works when I start it within apps overview, but not as explained in the video by pressing long the home button. I always get the google now icon.
I got a Samsung Galaxy Nexus, its a while since I rooted so I`m not really into how it all works anylonger.
The usb not working is and old problem, tried to shift it out with ha new part, but that didn`t work.
Anyway, a day ago I noticed that my phone is no longer rooted, my guess is that this might have happened during an update?Is there a way I can reroot it without using USB?
I can use fastboot mode, it stands "lock state - unlocked" Is there any hope for me rerooting my phone?
I have clone s4 = htm GT-A9500
I rooted with thys method:[URL] (RootMaster) But Download Mode doesn't work = i can't install new ROM.
I trying many methods... but flash / odin NOT work beacuse Download Mode not work.
I press home+Vol-+power OR home +(Vol+)+power and nothing
I dont have recovery mode too.
I have root i check it.
Rom Manager and other app from Store doesn't work.
I've rewrited my htc's rom and after restarting my phone iam seeing only HTC logo so I think that my phone has no ROM now (flashing took too short, i know my bad, needed to flash it again...). There will be no problem, but my + and - buttons doesn't work, so i can't open my recovery menu.
View 3 Replies View RelatedI'm trying to determine whether or not my phone is defective, or if this is a current problem with the Cliq.
Of the apps I've downloaded, only a few of them have worked. Of those few that work, some don't work right. Has anyone had problems with these apps crashing on them, or just not working correctly?
- Nice Battery (see description at bottom of: My Ultimate CLIQ settings (so far))
- WeatherBug (kept showing the wrong location, crashed when trying to change location)
- Snake - doesn't work just says its "paused"
- RingDroid - crashes when I select the "Facebook Pop" button
- Layar - screen is rotated 90 degrees at all times
There have been others, but usually I just uninstall them right after discovering it doesn't work right.
I've had an HTC Desire on Orange in the UK for about 6 weeks and it is having persistent problem. Firstly despite having a strong 4-bar out of 4 signal, online services and the internet do not work at all when a 3G signal is being received (e.g. news, weather, all widgets, internet, email etc).Calls and texts do work however with a 3G signal.But when a 3g+ signal (HSDPA) is being received, all internet services as above work fine.However, when a 3+ signal is being received, the phone does not make or receive calls or text messages, and often fails to send texts. Calls I make immediately shut down (bleep + �call ended�), and incoming calls from other people go straight to answerphone. Also often when turning the data connection on/off, it freezes and has to be rebooted, and turning airplane setting on and off does not fix the problem.
I have also tried the different network settings (GSM, WCDMA, auto, etc). �GSM� sends and receives calls and texts but doesn�t work (or is incredibly slow) with internet, and �auto� and �WCDMA only� show the problems as above.I don't think this is a network/coverage issues as, as I have seen many people reporting these same issues on other networks and in other parts of the UK, and I have read that other people are having to manually turn off HSDPA to be able to make calls (using an app?). Even if I can stop HSDPA from connecting to make sure the phone works, I still can�t use the internet at all on 3g � even GSM works better!
Finally, when I connect to a bluetooth device (e.g. car and headphones) the phone will connect briefly, and then randomly disconnect. I have also seen this issue reported elsewhere.I very much like the phone and don't want to get rid of it, but these problems are making the phone unuseable.Also I don't know if I should be contacting HTC or Orange about this. Will the upcoming Android 2.2 fix these problems?Anyone know how to fix this or if I need a new handset? Are there any apps that can help? Also does the Nexus One have these problems and are they fixed by Froyo?
So I made a discovery - my dialpad doesn't work during a call. Even if I bring it up via the softkeys, the numbers don't register a tap...anyone. else have this issue or is it just my phone?
View 49 Replies View Related