General :: Screen Freeze At Boot And USB Debug Not Working?
Oct 16, 2013
when I boot it, it gets to the lock screen and, if I leave it going, it freezes the screen and nothing can change this situation; the only visible activity are the green/orange arrows on data connection.If I press the power button just after getting to the lock screen, so that the screen turns off, the boot continues without problem and then I can use the phone.
I wanted to check the logcat, so I went to Dev options and enabled USB debugging: first master switch and then usb debug checkamark, but nothing happens.The phone remains connected as a MM device.
I'm using official 4.1.2 ROM and a rooted kernel.
View 5 Replies
Feb 2, 2012
bootanimation and shutdownanimation? I have the animations working, but the slash screen is still staying the same?
how to get the splash screen working on both shut down and boot up.When I change the shutdownanimation it goes to a black screen and then phone shuts off?
View 5 Replies
View Related
Jul 6, 2012
I'm having temporary screen freezes when I want to take out my HTC HD2 with tytung's ICS version. When I press the buttonss they light up but the screen stays black. I can still receive phone calls and connect it to a PC, where the PC recognizes the phone. Sometimes after 20-30 minutes the wakes up like normal when I press a button.
View 1 Replies
View Related
Oct 27, 2013
I have bought an iocean7 elite before same days for my daughter The mobile (MTK 6589T) and I have I major problem: suddenly the screen stop to respond at touch. I think maybe it is a software problem. I take of the battery many times but it does not happen anything. The mobile starts bat with totally freeze screen.I try to connect it with or without battery in different pc but the windows don't recognize it.
View 1 Replies
View Related
Jun 13, 2012
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies
View Related
Jan 28, 2014
I have a completely broken screen/lcd/digitizer on my Samsung Galaxy S3, debug mode was not on. The phone works as it will still vibrate when turned on and the LED / Menu / Back buttons light up during a boot. USB connector works as well. The phone was not previously rooted.
I had most important data on the sd card and I've already wrote off any other data on the phone as I've since moved on to a GN2. I would like to make use of the S3 (not necessarily as a phone but a server, security camera, etc.). I've read several posts here about my options and looked at numerous google articles, all seem to require debug mode being on or assume/require the data/OS must remain as this is what the user is trying to recover. I do not care if all data is lost on the phone, I just want to make the device useful again.
Am I out of luck if debug mode was not enabled or can I flash through adb via some obscure mechanism? Also note that fastboot is not an option here as the S3 (samsung) does not have it enabled. I am unable to get into "Download Mode" as I cannot see info on the screen.
View 5 Replies
View Related
Dec 2, 2010
This was reported in the other thread about X8 Issues, but thought to start a new one to gather feedback from users. It's about the ''black screen'' freezing issue encountered by some users. I have had this several times since owning the phone for a few weeks, so it is a recurring issue. Problem: The phone hangs or appears to be shut down or become unresponsive suddenly. Pressing the hardware buttons doesn't help as the phone doesn't react at all. Solution: Take out cover and battery and restart.Observations: From my own observations, it's not actually a shutdown but a major freezing/hanging. Sometimes when it happens, I can still see vague shades of the display at an angle. After leaving the phone for a while in the pocket, the phone comes back to normal again. Not sure if this is true for all users with this problem. Anyway, gathering more feedback to see how prevalent the problem is, to evaluate whether I should take it to the SE service centre, or whether doing so will help at all.
View 3 Replies
View Related
Sep 19, 2010
Ive used two digital clock widgets but they both freeze the time and don't move sometimes. I'm looking for either a 1x2 or 1x4 that wont freeze.
View 7 Replies
View Related
Apr 1, 2013
I have one issue with my Karbonn A30. After installing custom Boot animation,my phone is not playing animation and sound.(Neither original nor new one). When i boot my phone after showing logo it come to blank screen and then started to my home screen.
View 2 Replies
View Related
Jun 8, 2010
I bought a 3 charger bundle at eBay for cheap. When I tried using the wall charger, the touch screen freezes, and I can't do anything with the phone, while charging. Do you think it's safe to continue using the chargers I bought at eBay?
View 3 Replies
View Related
Mar 10, 2010
I've been looking for someone with a similar problem but I haven't found anything yet. My phone boots up OK then it goes to the activation screen but after a couple of seconds (10 - 30, seems random) the phone hangs. When it's at the activation screen it seem to connect to the cell service (Fido) but R in the status bar would indicates that it's roaming (clue?). I have to take out the battery to reboot. It's a T-Mobile G1 that I'm trying to get working with Fido (Canada). It's a phone I bought used (activated but locked) but then I reseted it to factory default which deactivated it. I unlocked it. I tried to activate it through wifi. Followed the instruction and downgraded it to rc29. I've tried different rc, different roms, same thing.
View 5 Replies
View Related
May 10, 2010
So I have a weird issue that my Incredible home screen is unresponsive when I plug it into a wall charger. Meaning that when it is plugged in I can tap the power button to turn the screen on but I can't slide or hit the home button to unlock. I have to unplug the phone to bring it out of lock mode.It seems to only do this when I use a cheap micro USB charger I bought off of Ebay ($2.50 shipped). When I went to the Verizon store they tried to replicate the problem with their Blackberry brand micro USB charger and the problem didn't come up.
View 7 Replies
View Related
Aug 17, 2010
So this morning, the alarm goes off on my Droid2 and everything is fine. About an hour later the screen froze and would not unlock or slide. It was absolutely frozen. I was using the stock charger last night. I took it by a Verizon store and the rep pulled the battery and then it started back up with no problem. The big problem is he took ATK (free pre installed version) and killed all the apps and proceeded to tell me how I had to do this. I said "dude, their was nothing running last night and I have not even downloaded any new apps, etc..." I just got the phone on Friday of last week. I really am not a fan of ATK and he tried to tell me if I don't do this, the phone will freeze.
View 7 Replies
View Related
Nov 27, 2010
Not sure which it is, and the answer will lead me towards either a new, better phone, or just a new battery.
I got my Eris a little over a year ago, so it's out of warranty, and it always had the occasional problem where it would either freeze when the screen was off, so I'd have to do a battery pull, or I'd take it out of my pocket to find that it was restarting.
It went through a few phases where it did both of those things a handful of times per day, then it stopped for a while, then started, then stopped.
Just recently, it's picked up again, and this is about 2 months after I rooted the phone, and until now, it's been great rooted. I've only really noticed this again though since I switched from KaosFroyo to CelebFroyo, but again, I also had these problems BEFORE I rooted too.
View 6 Replies
View Related
Aug 25, 2010
Read here some advices (even some about how to fix what you get after you disable but wasnt for hero)
Just wanted to know if I can freeze the app "HTC Lock Screen 1.00" If I should expect some force closes or the phone will explode. and if it by any chance brings back the stock lock screen. If not if it will run right away after defrosting.
I do know about widgetlocker, tried it didnt like and I dont wanna have a bigger app or service running for just locking.
View 10 Replies
View Related
Apr 29, 2010
my droid freeze at start up screen(M screen) after copying file in lib folder. how can i fix it?
View 8 Replies
View Related
Oct 30, 2010
I went to reboot my Droid because it was lagging a little and when it came back on it go stuck at the Cyanogen boot screen. I pulled the battery, put it back in and held the X to boot in recovery and my recovery won't come up either. It just skips right to the Motorola M and if it doesn't get stuck there it goes back to the Cyanogen screen.
I haven't made any changes to the phone at all so I am completely puzzled on why this is happening. I obviously can't take it back to Verizon since its rooted so if there is a way to fix this I really want to because I love my phone and my wife will kill me if it is screwed up.
View 3 Replies
View Related
Jan 4, 2014
Trying to get sound during the boot screen on my stock Gingerbread rom AT&T Infuse 4G.
In systemmedia, I have the bootsamung.qmg and bootsamsungloop.qmg. I was missing the PowerOn.ogg in the systemmediaui folder so I copied that from another Samsung phone but still get no sound during the AT&T boot screen. I assume there must be a text file that allows the phone to seek the ogg file.
View 2 Replies
View Related
Oct 10, 2012
I have an AT&T Galaxy S2 Skyrocket (SGH-I727) ...I flashed the CM10 Superheavy 5.0 ROM, but I did the Hercules (T989) by accident. Now my model number is (T989). I tried to flash the stock .tar file for I727, but I just kept getting the AT&T boot screen looping. How can I go back to I727 so I can reflash the correct CM10 ROM?
View 1 Replies
View Related
Nov 28, 2012
I switched my phone off and took the battery out, now when it comes on it doesn't go past the boot screen (with the big S) what can/should I do?
View 1 Replies
View Related
Feb 3, 2013
My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.I did many searches but cannot understand any.I can go into recovery and download mode which is i think so required by odin.I wonder if I can flash any stock rom again easily. Need zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked.
View 4 Replies
View Related
Oct 23, 2013
I restarted my phone because it was freezing and it turned on on the boot screen where it gives me options to Recover, Reboot, etc. The volume button broke a long time ago. It sometimes works to move the option but pushing the power button doesn't do anything. Is there anything I can do to restart my phone avoiding this screen? It goes there every time. Could one of the volume buttons be stuck?
View 1 Replies
View Related
Nov 3, 2012
I want to change the boot splash screen on my Eken W70 Tabout ablet.i did some research but im relly confused .
it has ics 4.0.3
I tried searching for the bootanimation file in system/media but it does not exist ..also tried adding my custom bootanimation file to the location but it did not work..
View 6 Replies
View Related
Nov 2, 2012
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
View 4 Replies
View Related
Oct 4, 2013
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
View 2 Replies
View Related
Dec 31, 2012
Well rooted the i10 tonight fine went to install the play store and got force close on alot of stuff hit the reset button as the tablet forze and it boots but wont go past the impression screen then huts of
View 1 Replies
View Related
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
View Related
May 31, 2012
I just installed the Android Revolution ROM for my phone, and I am now unable to get past the boot screen. I've been sitting here waiting for it to boot for 1/2 hour, before I took the battery out and tried booting again. Waited 1/2 hour again. Still no progress.
I had just made my phone S-OFF with SuperCID, and had flashed a new radio.img to my phone as recommended in the thread. After doing that, I went and used SuperWipe, and then I installed Android Revolution. Installation encountered no errors, so i was surprised when I was unable to boot.
I can still access 4ext recovery luckily.
EDIT: Wanted to point out that I was able to boot into my old rom after S-OFF, SuperCID and radio.img, but not after installing revolution rom.
View 2 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Apr 6, 2014
I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead. I'm attaching my current bootanimation.zip
View 5 Replies
View Related
