General :: SGT7 Upgrade Attempt To 4.2.2 And Failed?
Aug 22, 2013
Recently I have successfully upgrade my Galaxy Tab GT-P1000 to Jelly Bean 4.2.2
my friend to upgrade his.
However, I got stuck.
Below is the sequence I performed before I got stuck:
1. The Tab was on firmware 2.3.3 version
2. I root and install clockworkmod using CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS file.
3. I performed backup
4. Then I follow the instruction written in one of the site for upgrade to Jelly Bean 4.2.2 i.e. wipe data/factory reset and "wipe cache partition and wipe Dalvik cache.
5. Load CM10.1 Android 4.2.2 custom ROM
6. Then it reboot to Cyanogen but I had trouble to load google app package. tried a couple of time it went back to main menu.
7. This is when thing went wrong. I restore back from the back up I did earlier. Restore was successful but reboot and hang.
8. Then I powered off again. Restart using (power and volume +) then I've got error message such as
E: unknown volume for path [/system],
E: unknown process volume! Skipping...
E: unknown volume for path [/ data]
etc, etc...
View 2 Replies
Mar 24, 2012
I tried to update my device (Samsung S2, from T-mobile) and after follow instructions on you tube video I realized that my device wasn't compatible with that upgrade (Android 4.0). I root my phone before, i do something with Odin, well I mess up my phone... Are there is a possibility to fix that?
View 1 Replies
View Related
Sep 15, 2010
mybackup restored the icons where my apps used to be but they won't download from the market. It just says starting download but never starts.
View 6 Replies
View Related
Apr 20, 2013
My phone wont boot up its a samsung exhibit 4g and it running gingerbread 2.3.3 it says firmware upgrade failed tried everything only post if you have a link or know what your doing im now stuck on blackberry with out my presious bikerace game.
View 6 Replies
View Related
Aug 20, 2010
Ok not sure where I'm going wrong. Here's everything I have done. Starting with stock DX
- Used UniversalRoot to gain root access
- Installed and ran Titanium Backup, backup saved to SDcard
- Reran UniversalRoot and unrooted
- Flashed with SBF, seemed successful but my user data was still intact
- Booted to stock system recovery, wiped data/factory reset & wipe cache
- apply sdcard:update.zip
E:signature verification failed Installation aborted
View 17 Replies
View Related
Dec 8, 2009
We have a number of users experiencing crashes with our apps on Hero type phones (hero, droid eris, etc.). After some debugging, it appears that they upgraded the app, but that the phone somehow cached the old version of the AndroidManifest. For instance, the app version is still reported as one less than the latest, and the crash is caused by the phone not seeing a new activity in the Manifest (which is true for the old version manifest, but the new manifest of course has the activity defined). This seems to be limited to Hero phones, but we've seen it on all types (tmeu hero, verizon desirec, etc.). Is there any way to fix this besides spending many characters of the limited description size on something like "Hero users: please uninstall before upgrading"? Will there be a Hero fix to fix this behavior?
View 2 Replies
View Related
Oct 13, 2010
I just recently purchased a Samsung Galaxy GT-17500L (its a Bell Canada phone). After purchasing the phone (which was originally unlocked) I bought a Solo mobile sim-card, which was needed in order to use the phone on my Solo monthly plan. Everything was working fine until I decided to try and update the firmware from 1.5 to 1.6; unfortunately, like a few others from Canada, I didn't properly read the guide and after the upgrade, the phone was "re-locked" and wasn't accepting my sim-card. After going through the guide posted on Pg.4 here (Bell Canada users and Brazilian Users - Galaxy 7500L (notice the L)), with the help of Rasta-Man FB posts and others, I was able to get my phone back to the original firmware, but now I'm having reception issues. The phone will at times pick up the Solo Netowork (I'm still using the original solo sim card), but then drop it after 10 minutes and just say there is no service. When I search for networks, it recognizes the Solo one (I'm guessing b/c of the S.C) but it isn't able to connect.
View 3 Replies
View Related
May 13, 2009
Not sure what is going on. Running Windows Vista x64. Not had really any problems with eclipse. I had to upgrade to 1.5 and when I did that I got all kinds of install errors. So I said 'f-it'. I decided to start over and downloaded the 1.5SDK, downloaded the Eclipse for Java, Not Eclipse classic (someone said that was an issue). So now I have Eclipse for Java (or something to that name). Each time I try to compile it says 'Unknown Error: SDK is not loaded yet'
View 6 Replies
View Related
Sep 3, 2013
I just recently rooted my phone(iball Andi 5c) which runs on android ics 4.0.3..Mainly to use the sd swapper so I can get more space for apps but I have seem to have made a mistake when I used some sd swapper app.As soon as I used it rebooted my phone.I thought it did what it was meant to do but instead both my ext sd card and usb storage disappeared... gone poof just like that. Now I have no storage only phone memory.
View 1 Replies
View Related
Jan 19, 2013
i have penta tablet 709c{Rockchip RK2906 (Basically a RK2918 SOC without HDMI Output)}tab was locked ask too many pattern attempt.
I have update files but when i am install with memory card noting is happened same screen showing ---too many pattern attempt
Wifi was off
USB Debugging mode is off
not any volume key to reset on tab
when i am put to recovery mode using power key and menu key android logo was appear with red triangle
View 1 Replies
View Related
May 1, 2013
My friend's little sister was playing with this device and she somehow lock the device. Now, when I turn on the tab it asks for gmail account and password.. (which my friend tried his own and no luck with google verifcation etc). Is there anyway to reset this device?
In this device there is no custom or stock recovery. Just a dead android sign when open recovery nothing else. Also I cannot tick USB debugging from the settings because I cannot access the OS.
How to reset this device? Is there any hardware solution or tutorial available to factory reset any android device?
here is device specifications
View 2 Replies
View Related
Aug 8, 2013
After deodexing my ROM (successfuly) with android kitchen and manually applying the changes I attempted to perform this modification
[URL]
That resulted in a bootloop even though I do have the arabic .so file in it's supposed place.
I've tried to ln -s libs to lib from what I saw in some search results but nothing.
My android version is 2.3.6 and bak/smali commands were issued with -a 10 to support proper API level
Here's my logcat:
Code:
D/dalvikvm( 261): creating instr width table
I/dalvikvm( 261): Could not find method android.graphics.Canvas.native_drawText, referenced from method android.graphic
s.Canvas.drawText
W/dalvikvm( 261): VFY: unable to resolve virtual method 9864: Landroid/graphics/Canvas;.native_drawText (Ljava/lang/Str
ing;FFLandroid/graphics/Paint;)V
D/dalvikvm( 261): VFY: replacing opcode 0x6e at 0x0004
[code]...
View 1 Replies
View Related
Jan 1, 2012
My application creates a database on the fly and also populates it. The problem is I get a "Attempt to Finalize Cursor That has not been closed" error in logcat which mainly refers to this function.
Code:
public static void populateFromDatabase(){
/* if the database is empty just throw in the question */
Cursor c = AppData.db.db.rawQuery("SELECT * FROM question", null);
if (c != null && c.getCount() == 0){
c.moveToFirst() ;
int count = 0 ;
while(!c.isAfterLast()){
[URL]
My question is I am closing the cursor in all occasions so why this error ? Also note that i call this function only once in the program and the logcat error points to this.
View 2 Replies
View Related
Jan 13, 2010
When I tap 'call mobile' there is no attempt to dial and the call ends straight away (the end call button at the bottom greys out as soon as I tap call). This has only just started happening. Has anyone else had this problem and if so, what's the solution?
View 2 Replies
View Related
Oct 22, 2008
I'm in "progress" of making my first game on the Android platform. Since I'm out of ideas it'll be a remake of the classic C64 game "Deflektor". This is what I've got so far. Now, what I really lack is the ability to debug the app from withing the IDE (IntelliJ).
View 11 Replies
View Related
Sep 24, 2010
Just like the problem BenDroid is having, when I go into the marketplace, only part of it will show up. I can click on some of the categories and scroll some of the apps, but if I attempt to run a search of any kind, I get mixed results or no results at all when I know they should be there.
View 5 Replies
View Related
Sep 1, 2010
Attempting to root and upgrade to CyanogenMod-6. I've followed all the steps here, and it appears to be successful according to the Unrevoked software. Now, the guide for Cyanogen is pretty vague, so I've been following this guide too. After Unrevoked states that everything was a success, I have to reboot the phone (hard reboot, pulling the battery out).
When I run Rom Manager, any flashing I do is followed by the reboot, which takes me to the Android splash screen for a second, then either the phone will go entirely black, or I will see the splash screen with a black bar on the top. I can't do anything at this point, and have to hard reset. I've backed up everything, and currently my phone is still fine, even after selecting "Wipe data" etc., in Rom Manager.
View 2 Replies
View Related
Mar 25, 2010
My market app keeps crashing when I click the icon. Only option is to force close. I removed some apps the other night, but just some games, and such. I have searched and haven't found any solution to this problem. I have done a soft reset (battery out for 3 minutes) but it still happens. I'm going to call Sprint to see if they know what is up.
View 7 Replies
View Related
Jul 28, 2010
In many games there are actions that you need to hold Y and then press B , but for snesoid, since I am using my same thumb on the virtual keys in an attempt to press them both at the same time, it doesn't work. It will release y and then press B or just release y. This becomes apparent in games like Super Mario World when you run, then jump, you lose the momentum and just do a regular jump. On the droid x, the only solution I have found is to set B also to a hardware key, like one of the volume buttons, then you can see how its supposed to work when you hold Y then hit B. This affects many other games like DKC3 (jumping while holding barrel). Any help or ideas?
View 4 Replies
View Related
Nov 21, 2010
I have a null pointer on a button that I need to take me to a new layout when pushed. I have the code set as:
((Button) findViewById(R.id.analyzee)).setOnClickListener(btnClick); inside a method that uses conditional statements. It is a basic face detect app. If faces are not found, I do this:
if (facesFound < 1) {
mFlipper.setDisplayedChild(2);
mTheMessage = (TextView) findViewById(R.id.falsemessage);
mThePicture = (ImageView) findViewById(R.id.false_view);
mTheMessage.setText(R.string.noFaceOne);
mThePicture.setImageBitmap(bitmap565);
return;
if faces are found, I draw a box on the face, and do this: Code...
So, my issue lies in this: In one of my layouts in the flipper, the button that rests on the layout will need to give the user the option to snap a new picture if there are no faces found. The other layout will need the button (upon click) to have the faces cropped and the results to be sent to another layout.
The issue I am facing is where the code: ((Button) findViewById(R.id.crop_face)).setOnClickListener(btnClick);
needs to be placed in order for the program to release the button has been clicked, it calls the case in my switch statement, and runs the crop face_method.
I try putting it in the if statement where I set the image View and text View, but I get a null pointer on that line I am declaring my button on.
The buttons I have on my main menu work fine, as they are in my onCreate method, but I don't know where to play this button command, and also where I need to place my reopen Camera command.
View 1 Replies
View Related
Sep 27, 2009
I posted this back in May on the [android-developers] Google Group. I never heard back and was not able to reproduce the problem until one of my students did last week. I figured I'd post it here and see if it rang any bells for anyone.
In one of my code samples, I have the following method:
CODE:..............
When I run it, sporadically, I get this:
CODE:......................
This makes no sense to me. The database is definitely open. The SQLiteClosable is the SQLiteQuery created by SQLiteQueryDriver, and I see no evidence that there is an object pool or something going on here that might explain how a "new" SQLiteClosable is already closed. The fact that it is sporadic (meaning the same UI operations sometimes trigger the exception, but not always) suggests some sort of pool, race condition, or something...but I'm not sure where.
The code in question is from the LunchList tutorials out of my Android Programming Tutorials book. It's a bit spread out and not terribly suitable for posting directly in SO. You can download the code for that book from the above link if you want to take a look at it. I do not recall exactly which edition of the tutorial the student was working on at the time, though it was in the Tutorial 12-Tutorial 16 range. I was mostly hoping to run across somebody who had tripped over this problem before and had a likely culprit. I'm fairly certain my database is open.
View 4 Replies
View Related
Aug 9, 2010
My GF recently had an X10 and she set her lock pattern on this phone. Unfortunately, she forgot the pattern that she did so she end up inputting wrong patterns and then gets locked. The phone is asking us to enter the email address (which we did - using the gmail address) but didnt work.Do you have any idea how to fix this.
View 2 Replies
View Related
Jul 9, 2010
Sometimes when I reboot my phone, I first see the 3 androids on skateboards and then it goes to a pic of phone with the red exclamation point in a triangle (same as the failed recovery error). I can pull my battery but that does not help. My phone is useless for at least 30-45 minutes. I have pulled my battery up to 20 consecutive times to fix with no avail.
The variables: This is a refurb phone with 2.1 pre-installed. I have tried to root my phone with the whole timing trick, pull card, insert card. This was done a week or two ago. I do not have that file on my card, nor was my rooting successful. I am thinking that my problem is due to the refurb. My dialer lag is way worse than my previous phone. I can make one phone call every hour or so and I can forget calling someone right back if I missed their call. Does the red triangle/exclamation point show an attempt at rooting?
View 4 Replies
View Related
Nov 11, 2010
I tried to update the phone by connecting it to computer thru PC companion and followed the instructions till the time it asks to disconnect the phone from computer remove battery for 5 secs and turn on again.
Now at this step the phone is not turning on and whenever i press the power key, red notification light is blinking 3 times and nothing else is happening.
View 3 Replies
View Related
May 19, 2013
when i run the sdk manager i get. Failed to execute tools/android.bat:error 2 the system cannot find the file specified
View 1 Replies
View Related
Jun 6, 2013
I am using htc Desire S and I have installed 4EXT Recovery 2.2.7 RC5.
My HBOOT Version is 2.00.002.
Just now I tried many times (even trying with different SD cards) but I failed to install Endymion V3.5 (Link below) [URL]
The problem is: When I installed, and reboot, it shows "htc" in green words with bright white background, then all black, then "htc" in green words with white background again, then it boots into 4EXT Recovery 2.2.7 RC5.
I used "wipe all partitions except SD card". Then install from SD card, choosing the correct zip file (And it also shows to me that I have successfully installed the ROM)
I then tried to use another ROM: [URL]
This one, it successfully does not boot me into Recovery, but it remains on the booting screen for more than 10 minutes, so I suspect it also failed...
I then continued to try this: [URL]
THE PROBLEM IS THE SAME AS INSTALLING ENDYMION!!
Finally, I reinstalled my old ROM: [URL]
AND IT SUCCEEDED.
=================================
Now I suspect it was the problem of Andriod version, those ROM which booted into recovery are all (though only 2) 2.3.5
Any other thing (except full wipe) I need to do or change or make sure, before installing Endymion V3.5?
(I even tried both EXT3 and EXT4. Also failed.......)
View 1 Replies
View Related
Oct 19, 2011
I am having an issue trying to restore my sms on my HTC EVO 3D I only have about a little over 7k sms on the file and when I try to restore this file it will quickly go to 100% then the next window will pop up and say restored completed successful 0 failed 7117 total 7117.
View 1 Replies
View Related
Feb 15, 2013
i have a bsnl penta ws802c. I wanted to root it and selected the update from external source option in recovery mode. It is giving an error E; signature verification failed and then installation aborted.
View 1 Replies
View Related
Jun 9, 2013
I've been getting "Failed Login" notifications since 3:00pm yesterday every 15 minutes from an IP that appears to be mine. However I'm logged in with no issues.
View 2 Replies
View Related
Apr 20, 2012
i can't update my nexus s (4.0.3) to 4.0.4 .... it download the update and it says verification failed (3G and WIFI)..my phone is rooted and bootloader is unlocked
View 2 Replies
View Related
