My mt6577 cherry mobile titan is brick.. how to unbrick my cherry mobile titan.. my phone is not off and cant turn on.. and it is has been format thru sp flashing tool.. my problem is i have no firmware.nfo and the scatter-loading file of my cherry mobile titan..
View 3 Replies
My phone won't boot up it's just vibrating after the boot animation logo with black screen but I can access the stock recovery and have charging battery sign so I think it's soft brick.
What seems the cause of brick:
I accidentally bricked my phone using root cleaner app and full cleaning option.
I tried factory resetting in stock recovery but It's not working.
Additional Information:
Our local phone doesn't have CWM and Custom/Stock Rom yet but it's rooted. CM Omega Icon has same spec with Micromax A121 Canvas Elanza 2 you could say that's the OEM of our phone. But unfortunately they do not have CWM and Custom/Stock Rom also.
how do I unbrick my MK6577 (Noir A-8) I tried to use SPTool to install CWM but now luck need ROM files to flash it through SPTools.
View 2 Replies View Relatedis there any way to root new cherry mobile phone OMEGA ICON?
View 3 Replies View RelatedThis is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
Your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
my device called CHERRY MOBILE W100 with the following specs:
CPU: 1ghz snapdragon qualcomm (245.76-1008.0Mhz)
ARMv7 Processor rev1(v7)
Cores1
Architecture: 7
BogoMIPS: 398.67
Hardware: QRD MSM7x27a SKU3
Revision: 1
Screen resolution: 320 x 480
3.5 screen
IPS display
GPU Vendor: Qualcomm
GPU Renderer: Adreno (TM) 200
GPU Version: OpenGL ES 2.0
Memory size:512 ROM 512 RAM
I tried to root it through Unlockroot, Z4Root and 1click root tools but failed...
I'm really bugged by the Cherry Mobile Flare logo. It's like this: when our devices (S100, otherwise known as the Karbonn A9+ in India) are still in Android ICS(4.0.4), it's really a breeze to change the boot(splash) logo using the AIO flasher. Anyways, since we updated our devices to JB 4.1.2, I have tried and failed (countless times) in changing the boot logo using AIO (partition table does not exist). The boot logo also appears during off-charging (before the animated battery).So I searched the web and found the link below(which looks promising) and tried but I get the "can't open dev/block/mmcblock0p18" error. It's NOT the boot animation, it's THE boot logo guys.
This is the link [URL]...
I was trying to root my "titan pc8008" tablet the other day. Being a noob i ended up screwing it up and now it when i turn it on i always gets stuck in the loading screen android os.
When it worked i managed to have adb working properly (that's how i was doing the rooting).
It never occurred to me to install cwm or make any kind of back up before tinkering with the device.
I've done some research and manage to boot into a screen with a green android laying with a red triangle over it' belly. I think this is the stock recovery.
The thing is the tablet doesn't have vol keys and the stock recovery screen doesn't show any options.
I've tried pressing all kind of combinations with the keys the tablet has but nothing happens.
Also, when im in the recovery screen i can do some adb commands like "adb reboot recovery" ,which takes me to the same screen, and "adb reboot-bootloader" which just powers off the device. "adb shell" says something about like it can't mount the file system.
How can i flash cwm (or do anything) from this point?
I recently tried a modification on my ICS rooted tablet, that would let me hide my status bar. To do this, I would have to replace two system files (settings.apk and services.jar). I made the mistake of not backing up the originals. So I'm now looking for a rom image for the Hipstreet Titan, that is the original, default image. I'm hoping I can get my tablet out of a boot loop by using this. If it isn't possible to find a rom for this tablet, maybe it would be possible to get the original settings.apk, and service.jar for my Hipstreet Titan.
View 3 Replies View RelatedI recently won a rugged smartphone called Titan (not the HTC titan). You can see it here: Rugged Phones
It runs Android 2.3.6
The details from the "About Phone" menu are as follows:
Model number: Titan
Android version 2.3.6
Kernel version: 2.6.35.11 -perf+
Build number: VER_Titan_TISA0120
Using *#*#1234#*#* does not bring up anything
how to root this phone?
in my device htc one x mt6577 it have ram 1g but always used 802mb and free 186mb its high usage of ram and in same time i dont open any app and when i connect device to computer and run eclipse program this appear in this picture
it appears 82% of ram uknown it need same to format it
As I was porting a rom for my micromax canvas lite (nt6577) everything works except the camera.
View 5 Replies View Relatedi have ZTE v907m that stuck on splash screen and i cannot go to recovery. I search all threads on how to flash rom on this device and i found this...
[URL]
i already download almost all the roms by bgcngm but i cant find why it doesnt have scatter file when using SP Flash Tool.
my question is once i flash is there a way to revert all settings back to the wait it was? for let's say, if something bad happens, i can still go for the warranty on the phone?
View 3 Replies View Relatedi have this phone (alps e1901 v77 fwvga) aka xtouch x507 (mt6577)
i flashed the original firmware from the supplier but since then the phone didn't boot
it wont charge also, but it's being recognized by pc and i still can flash on it.and i tested the battery its charged, and also there is current drain (~50 mA)when power button is pressed
I'm about to flash my B92M (SIII Clone) MT6577 but I need to make sure that I have everything set up. This is my first time flashing a phone and I don't want to mess it up.
So basically I'm having trouble installing the MediaTek DA USB VCOM Driver and I'm not even sure if I'm trying to install the right one. How do I go about installing this? And download link for one that supports MT6577 or does the MT6575 one work with it?
As I was porting Android 4.2 for my Micromax A92 based on mt6577 I am encountering these errors
While playing video and recording videos
Code:
D/MPEG4Writer( 113): A bufferChunk
D/MPEG4Writer( 113): left_video_chunk_num=0, mInterleaveDurationUs=1000000, mBitrate=6128000
D/MPEG4Writer( 113): left_mem_size 0
E/OMXCodec( 113): [OMX.MTK.AUDIO.ENCODER.AAC] Calling emptyBuffer on buffer 0x42b10e60 (length 1024), timestamp 1076436623 us (1076.44 secs)
[Code] .......
While opening messaging (it force closes)
Code:
E/AndroidRuntime( 7534): FATAL EXCEPTION: main
E/AndroidRuntime( 7534): java.lang.VerifyError: com/android/mms/ui/MessageUtils
E/AndroidRuntime( 7534): at com.android.mms.MmsApp.onCreate(MmsApp.java:97)
E/AndroidRuntime( 7534): at android.app.Instrumentation.callApplicationOnCreate(Instrumentation.java:1000)
[code]...
I have a Mtk6577 based device (WIKO cink slim or fly IQ442) and i found a fonctionnal miui rom for this device "port from other MTk6577 device wich are very very similar, instead of Wifi Bt and gps chipset) So Wifi and BT dosen't want to start, even if we press the ON button. it's the same thing for BT and gps.So i would like to fix that, i tried with the kernel I hqve Compiled from manufacturer sources, but there still that problem.
View 2 Replies View RelatedI have a MT6577 Android ICS device. I want to update it to Jelly Bean. How would I do that.
View 1 Replies View Relatedi'm trying to root my (chinese) tablet (like title). i've used nanospic.ro page_id=12[/url] WM8850 RootBurner v1.1.0.
So i put files into sd and reboot tablet. After the text "root complete" i removed sdcard and my tablet opened. I knew immediately that I could not access the to settings cause the icon was passing and text becomed com.android.settings. when i try to open it, an error message. So i try another time to root device but it won't open itself.. i turn on it and remain on loading gif..
I have an Alcatel OT-906 but I bricked it.
I need to rescue it but I don't find any ROM to this phone or some way to repair it.
Is totally bricked
The terminal was mistakenly brick while I introduced changes to the file build.prop. Now the only way to turn on, is flashing the firmware again (putting the original file from fastboot does't work). I wanted to know how to transfer the firmware zip file to internal memory because the device is not recognized as FTP.
View 1 Replies View Relatedmy prada 3 is brick
View 2 Replies View RelatedActually I am in a deep trouble, I bought Micromax a90s a month ago , It is really a very good phone. I rooted it and was very happy but 1 day ago I was trying to add new fonts to it & It got bricked I don't have any backup.I have no sources to send it to service centre. how can I repair it myself, Unbrick ?
View 1 Replies View Relatedi was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.
View 9 Replies View RelatedI believe I have bricked an Alcatel 990 after flashing "cm-7-20121221-UNOFFICIAL-brandy.zip" via CWM.
Here are reasons why I believe it's bricked good and proper ;-P
1/ device boot loops when charging only via usb connection to PC
- 1.1 - device shows android logo - then "Alcatel One Touch Cyanogenmod 7" text/logo
- 1.2 - this loops continuous and never fully boots - output of adb logcat below
2/ when power-up off charge, only "menu", "search" and "back" soft keys illuminate - the screen+backlight stay completely off
- 2.1 - this remains constant until battery pull
- 2.2 - recovery mode via key combos do not work. Period. (no user error - assured!)
3/ when connected via usb during point 2 - there is not feedback from adb logcat - dead as a doorknob
- 3.1 - when boot looping (1.1 above) I get ~2seconds of adb connectivity then device reboots.
- 3.2 - fastboot <options> <commands> does nothing - device stays as "waiting forr device" this is contstant
- 3.3 - adb has better luck - I can invoke adb logcat and this captures log info as below
- 3.4 - adb recovery options fail and device reboots and hangs as on point 2 above
- 3.5 - adb shell shows rooted prompt for 2 seconds when <up/previous command+enter> very quickly repeated keyboard bashing style
- 3.6 - I have invoked "adb shell rm -r /cache/*" and "adb shell recovery --wipe_data - all to no avail in context of unbricking device
Code:
david@1000H:~/Downloads/src/adt-bundle-linux-x86/sdk/platform-tools$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/cm ( 105): Welcome to Android 2.3.7 / CyanogenMod-7-20121221-UNOFFICIAL-brandy
I/cm ( 106): _
[Code] .....
This is replicated on command and is constant. Replicated under slackware/linux and under win7-32bit-ultimate.
Recovery fails to boot so I need some sort of usb 'bridge' to interrupt the boot loop and invoke recovery - or flashall back onto device - but fastboot fails to identify the device/connectivity.
I've hard bricked my e9x tablet, no power black screen nothing, and I'm trying to unbrick. I've reset the NAND but that didn't work either.
View 1 Replies View RelatedI have recently bricked my samsung i5500 by flashing it with wrong software(that's what I think anyway). Phone is not responding at all. The screen is black at all times. I've tried volume down + ok + call end with no effect also UnBrickableMod didn't work. Is there any way to get it to work again?
View 5 Replies View Relatedhow to Unbrick the Asus Memopad HD7 ? Or custom recovery or where i can download the Stock Rom ?
View 9 Replies View RelatedI update ICS to my samsung Galaxy S2 HD LTE failed maybe cause I'm using an i9100 ICS rom.
when i restart the phone, it goes into an phone icon connected to a PC icon with an exclamation mark icon inbetween.
or I can't turn it into recovery mode by pressing Volume Down + Home + Power (or any other key combos) .
I can't find the device by adb via pc, and kies connect the phone also failed.
I think the phone is bricked when I can't get into download mode.
even if i use a usb plugin, it goes to "Factory mode" with "phone ! PC" icon,but not down load mode.
how can I recove my phone?