The terminal was mistakenly brick while I introduced changes to the file build.prop. Now the only way to turn on, is flashing the firmware again (putting the original file from fastboot does't work). I wanted to know how to transfer the firmware zip file to internal memory because the device is not recognized as FTP.
View 1 Replies
i just received my Asus padfone 2 and the phone will not insert properly into the pad, i have tried pushing very hard and still will not go in, the end of the phone still sticks out.
View 1 Replies View Relatedi checked everywhere theres no way to root the padfone? i just ordered the padfone 2 but now i am getting a little doubtful if theres no way to root padfone 1 then theres no way to root padfone 2
View 1 Replies View RelatedHow to root Asus Padfone Mini 7?
I already examine Vroot and Asus Padfone2 root method [URL] .... they didn't work.
I can not install programs on sdcard and many programs like titanium backup doesn't work
My padfone was bricked when I tried to replace the recovery by TWRP via goomanager (TWRP official recommended).
The procedure of goomanager makes nothing happens, it seems like just download the TWRP package.
The problem is that phone has different protection policies compared to HTC, samsung etc and the bootloader (fastboot mode) is locked by default.
In other words, there is no such a way to connect your phone when your rom, recovery did not pass the verification unless unlock the bootloader by ASUS official tool and void warranty before your operations.
If the recovery or roms did not pass the validation then the left-top corner of screen will show 'invalid kernel' and the phone haven't been unlocked to be premised to visit fastboot mode then the phone will be bricked.
I think there is two way to unbrick, the first is to unlock the bootloader by external connector, the other is to flash official recovery data by external. But when I tried to search solutions, I got nothing about padfone A66 even that RIFFBOX official forum.
The issue here is that when I turn on the device, go to contacts and they are all there. After some time, may be 5-10 mins, someone calls me or texts or I go to contacts myself, there are no names stored, except for the device owner (me).
What I have tried to do:
- restart the device to see contacts (yes, that works, but I don't want to restart my device everytime I want to make a call or receive a text message)
- from settings>applications>all tab>contacts => close application and clear cache buttons (not sure how they are in English), go to contacts app choose account which do I want to sync from, in my case its Google only, press sync contacts and voila, they are there. However, for only a few minutes again. If you repeat syncing without closing program and clearing cache, then it will not work.
- filter - doesn't work. Either Google option has many suboptions but no contacts or Google option is there but no sublists (i.e. all contacts, family, friends etc.)
- all my contacts ARE in Google account, which I can see via google.com/contacts - so this isn't the problem.
- device sometimes doesn't want to sync. it does not say it has not been synced, but I can see that the "Last time" it was synced was when it really synced contacts that I could see them, but not just now.
I do not want to use any "aftermarket" apps to view contacts, as I want my device to be as stock as possible.
The first day I bought PadFone 2 it advised me to upgrade to 4.1.1 Android, which I did, so I don't know whether it did work before.
Uninstall your whatsapp messenger and the problem should be resolved on your padfone 2. The problem is the conflict of address books of your native contacts app and of whatsapp contacts. They seem to be stored in the same directory. Now need to wait for whatsapp update.
How to check if the padfone have a lock/unlock bootloader? and if its lock, how to unlock it?
View 1 Replies View Relatedsomething is creating lots of tracker-*.tmp files on my SDcard root. How can i prevent it or what is causing it? please see the screenshot
Asus padfone, Stock WW system (4.0.3)
how do I unbrick my MK6577 (Noir A-8) I tried to use SPTool to install CWM but now luck need ROM files to flash it through SPTools.
View 2 Replies View Relatedi'm trying to root my (chinese) tablet (like title). i've used nanospic.ro page_id=12[/url] WM8850 RootBurner v1.1.0.
So i put files into sd and reboot tablet. After the text "root complete" i removed sdcard and my tablet opened. I knew immediately that I could not access the to settings cause the icon was passing and text becomed com.android.settings. when i try to open it, an error message. So i try another time to root device but it won't open itself.. i turn on it and remain on loading gif..
I have an Alcatel OT-906 but I bricked it.
I need to rescue it but I don't find any ROM to this phone or some way to repair it.
Is totally bricked
my prada 3 is brick
View 2 Replies View RelatedActually I am in a deep trouble, I bought Micromax a90s a month ago , It is really a very good phone. I rooted it and was very happy but 1 day ago I was trying to add new fonts to it & It got bricked I don't have any backup.I have no sources to send it to service centre. how can I repair it myself, Unbrick ?
View 1 Replies View Relatedi was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.
View 9 Replies View RelatedI believe I have bricked an Alcatel 990 after flashing "cm-7-20121221-UNOFFICIAL-brandy.zip" via CWM.
Here are reasons why I believe it's bricked good and proper ;-P
1/ device boot loops when charging only via usb connection to PC
- 1.1 - device shows android logo - then "Alcatel One Touch Cyanogenmod 7" text/logo
- 1.2 - this loops continuous and never fully boots - output of adb logcat below
2/ when power-up off charge, only "menu", "search" and "back" soft keys illuminate - the screen+backlight stay completely off
- 2.1 - this remains constant until battery pull
- 2.2 - recovery mode via key combos do not work. Period. (no user error - assured!)
3/ when connected via usb during point 2 - there is not feedback from adb logcat - dead as a doorknob
- 3.1 - when boot looping (1.1 above) I get ~2seconds of adb connectivity then device reboots.
- 3.2 - fastboot <options> <commands> does nothing - device stays as "waiting forr device" this is contstant
- 3.3 - adb has better luck - I can invoke adb logcat and this captures log info as below
- 3.4 - adb recovery options fail and device reboots and hangs as on point 2 above
- 3.5 - adb shell shows rooted prompt for 2 seconds when <up/previous command+enter> very quickly repeated keyboard bashing style
- 3.6 - I have invoked "adb shell rm -r /cache/*" and "adb shell recovery --wipe_data - all to no avail in context of unbricking device
Code:
david@1000H:~/Downloads/src/adt-bundle-linux-x86/sdk/platform-tools$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/cm ( 105): Welcome to Android 2.3.7 / CyanogenMod-7-20121221-UNOFFICIAL-brandy
I/cm ( 106): _
[Code] .....
This is replicated on command and is constant. Replicated under slackware/linux and under win7-32bit-ultimate.
Recovery fails to boot so I need some sort of usb 'bridge' to interrupt the boot loop and invoke recovery - or flashall back onto device - but fastboot fails to identify the device/connectivity.
I've hard bricked my e9x tablet, no power black screen nothing, and I'm trying to unbrick. I've reset the NAND but that didn't work either.
View 1 Replies View RelatedI have recently bricked my samsung i5500 by flashing it with wrong software(that's what I think anyway). Phone is not responding at all. The screen is black at all times. I've tried volume down + ok + call end with no effect also UnBrickableMod didn't work. Is there any way to get it to work again?
View 5 Replies View Relatedhow to Unbrick the Asus Memopad HD7 ? Or custom recovery or where i can download the Stock Rom ?
View 9 Replies View RelatedI update ICS to my samsung Galaxy S2 HD LTE failed maybe cause I'm using an i9100 ICS rom.
when i restart the phone, it goes into an phone icon connected to a PC icon with an exclamation mark icon inbetween.
or I can't turn it into recovery mode by pressing Volume Down + Home + Power (or any other key combos) .
I can't find the device by adb via pc, and kies connect the phone also failed.
I think the phone is bricked when I can't get into download mode.
even if i use a usb plugin, it goes to "Factory mode" with "phone ! PC" icon,but not down load mode.
how can I recove my phone?
how to unbrick galaxy s duos ?how to unbrick
View 3 Replies View RelatedSince yesterday I have a big problem. Yesterday I think I deleted my Sensation XL, because now it's dead. The bootloader and the Charge-LED dont work anymore. No sign of life... Now I saw the tutorial how to unbrick a HTC. I downloaded Ubuntu, but if I use the brickdetect of the Sensation it just says: "Device can't be detected". Now my questions: Where can I get the Unbrick-package for the Sensation XL? Can I unbrick my Sensation XL with Ubuntu?
View 4 Replies View RelatedAll information I found (perhaps I lookup with wrong keywords) is about unbricking the phone or other manufacturers tablets but once someone rooted the device and installed a modified rom but then playing with fastboot or some download managers, etc.
1. I wanted to revert back to 4.1 JB soft for my tablet as I found the most recent update messing up with 3G connectivity despite the fact the manufacturer prepared the update to improve 3G... anyway
2. I run the RKBatchTool 1.5 the device was connected properly as I did before when upgrading from ICS to 4.1 JB.
3. Unfortunately, just before the end of downgrading something went wrong (please see the below log) and now booting up the device fails. At first it displayed some linux script about trying to recover, then prestigio screen appeared just to show in a second a dead android robot with an exclamation mark.
14:57:28 504Rockchip Batch Tool v1.5.3.0 start run
15:02:16 091Rockchip Batch Tool v1.5.3.0 start run
15:05:33 769Rockchip Batch Tool v1.5.3.0 start run
15:58:23 292**********Upgrade Start Total<1>**********
15:58:23 307<Layer 5-3> Test Device Start
[code]....
4. I tried a combination of volume up and power button but still no luck.
How can I bring the live back to the device that was not rooted. I have an external SD card. I loaded an original image from prestigio but I guess I need something else done so it actually boots from the SD and recovers the ROM to the internal memory.
I experimented a bit with the settings and I adapted the tablet one file in ROM (Data / system / etc) vold.fstab.
Unfortunately tablet not working, only show android logo and then nothing. In recovery I got it, wipe data / factory reset and wipe cache partition but without result, that result is the same.
Is there any way to copy original file or modify the edited file in ROM?
I suppose some way by cable and ADB.
Firmware unfortunately I do not and I did not find him anywhere.
It is a tablet with Rockchip RK3188 -> 3Q RC1025F
I hard bricked my GT-S7562 s duos and need a way to unbrick it.I was trying to port CM11 on my device while it happened.No problem if the way you know works for my device or not. I will try anything .
View 9 Replies View RelatedI bricked my motorola atrix 4g when i boot it boots into AP fastboot flash mode flash failure and if i power up and hold down both volume keys it says boot mode selection available boot modes normal powerup recovery ap fastboot bp tools normail power up gives me invalid CG OTV invalid CG version and invalid CG OTV recovery does not work flashboot does and bp tools does nothing i just got this phone for my birthday!
View 4 Replies View RelatedHow to Uninstall Chainfire 3D on bricked Devices ...
1. Connect USB cable and then restart your phone.Get your phone in Recovery Mode....
2. Check whether your device has been detected in the PC - Device Manager - Android ADB Interface.
2. Run "adb devices" - to make sure the phone drivers are ok (should output a long hex string and "device"). If Device Isn't Detected You need to install Adb Drivers... Download From: adbdriver.com
3. Run "adb shell" from command prompt. If $ came then Type SU. so it will automatically change to #. ( Means your phone rooted and you gain root permission to delete the Bloody CF3D driver from your phone.
*Tip*If You Get An Error Type "# mount -o rw,remount /system" - Press Enter.
4. Still in shell? Type "sh /cf3d_uninstall.sh"
if sh /cf3d_uninstall.sh doesnt work , try 'sh /system/lib/cf3d_uninstall.sh" instead.
Phone will automatically reboot and will be ready.
I have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?
I flashed a wrong ROM, because flash didn't work, I used a Star S5 one instead of a X920Butterfly one. So I tried this guide http:[url]..... but my PC do not recognises phone, I Have Upgraded Windows 7 to Windows 8 so I don't now how I can re-install drivers.
View 2 Replies View RelatedMy mt6577 cherry mobile titan is brick.. how to unbrick my cherry mobile titan.. my phone is not off and cant turn on.. and it is has been format thru sp flashing tool.. my problem is i have no firmware.nfo and the scatter-loading file of my cherry mobile titan..
View 3 Replies View RelatedHow to unbrick my one s. I can get into recovery but i cant do anything else. I have tried flashing multiple boot images from the bootloader but i get the same failed message every time i try to flash a rom. I dont have s off but i am rooted and supercid.
View 1 Replies View Related