I downloaded Font Installer on my Kyocera Rise and I attempted to change my font. Soon after installing the fonts it required a reboot and the phone is on a bootloop due to that. When i go to system recovery, , at the very bottom it says: E:Cannot load volume /misc.
View 9 Replies
Go to the link provided below. I prefer to post a link to the Kyocera Rise Root, in order to provided a Centralized location for this phone...
Root Kyocera Rise v4.0.4
I had used a root toolkit to root my kyocera rise as rooting by hand has become a pain. Anyways, I had run into an issues where my phone would not run properly (possibly due to malware or the likes) and as such I reset it back to factory data. For months after I had assumed that I did not have root anymore because I had lost the supersu app (stupid me forgot to check root). Recently I realized that in one of my apps that could use root, it was using root and I did not even know it.
Seeing that this would cause some security issues, I quickly installed super su and updated the binaries. From then on, whenever an app tried to request root permission, it would then freeze. I then uninstalled super su and did the unroot setting from software and then planned to reinstall it. When I reinstalled supersu, It complained that it could not install binaries and this was bad.
Anyways, the kyocera rise has a locked bootloader that prevents me from completely flashing over a new copy of the os, which sucks, and now I feel like I am stuck with an unrootable device because I can't seem to reinstall the binaries to allow super su or any other superuser program to work properly. FYI, this is just stock android, nothing fancy about it.
Is there anyway to get rid of the shutter sound on the kyocera rise I don't see any options to turn it off and its pretty annoying
View 2 Replies View RelatedI have rooted my Kyocera Rise recently so that I could install hp beats audio drivers on the phone. Something went wrong during the install and now the audio drivers are corrupted and crash the app whenever it has to create a sound. My question is that since I have heard the kyocera rise is pretty locked down on the rom flashing side, is there anyway that I could reinstall the stock 4.0.4 on the kyocera rise?
when it comes to flashing roms, but am still pretty good with hardware. what I have to do to restore the stock android or what I have to do to flash a stock rom.
F.Y.I. I did do a TB but was an idiot and did not verify the files, and now everything is corrupted.stock drivers in the system folder such as etc and the others, and a TB backup of stock would be even better. A one stop way of restoring android would be fantastic instead of going through all the steps in:
I purchased Kyocera Rise during blackfriday sale (switching from LG Optimus V to Kyocera Rise). After playing on it for awhile, I wanted to use it as a wifi hotspot so I downloaded quicksetting app but wifi hotspot setting didn't work. My Rise is rooted and using stock ROM. I was be able to use my LG Optimus V (rooted and IHO rom) as a wifi hotspot this way but it isn't working for my Rise.
View 9 Replies View RelatedYesterday i installed some apk's and .. installed beats by dr... but the sound will be dissappear
i deleted it and .. copy new libs from the mod for the cyanogenmod *srs effects" but .. its frezze every i turn on ...
I tried to change the font on Kyocera Rise with Font Installer, after it was complete it required to reboot but now its on boot loop. When i go to Android System Recovery the bottom says E:cannot load volume /misc!
View 3 Replies View RelatedI have a Kyocera Echo which has decided to forever loop in the start up instead of doing anything and since I can't hold power and volume down to factory restart I thought it was dusted
but if i read this thread correctly, HTML Code:
[URL]
I might be able to do a hard rest through fastboot.
I have installed, all the drivers from the Kyocera website, I have the sdk, I know where to go into command prompt, etc. But my phone is not being detected by the fastboot tool. when I type Fastboot devices, I get nothing, not even the ? mark they mentioned and it just hangs on when I do fastboot -w saying it's waiting for the the device.
Even though its looping my computer will detect the phone and when I have placed it in what i think is download mood (power + plus both volume buttons) it has detected the right drivers to install and though it loops will kind of pop up the phone on my computer.
But when I put it it in what I guess is fastboot mode (power + volume up) Window's says it found new hardware, "Android," just plain android. I tried to direct to install the usb drivers from the Android-sdk/extras/ folder, but that doesn't work and Window is not finding anything automatically.
I assume the problem is that I need to find the right driver for the "Android," but I can't seem to figure what driver that is.
Im searching for the kyocera hydro xtrm(metro pcs) system files because I think I only soft bricked my hydro xtrm.. the phone boots up to the android guy with the umbrella buzzes then reboots.. maybe with some system files i could use odin I dont know how to get into recovery on this device.
View 2 Replies View RelatedI have sprint tv, some facebook crap, etc that I don't need or want on here. Any way to remove them in bakedsnack? The uninstall option was greyed out.
View 1 Replies View RelatedI downloaded the 2.1 zip to sd card, and cleaned all off of sd card, EXCEPT the zip file. Put the other 1.5 files on another sd card Installed 2.1, no issues at all. Runs great. Do I need to put those misc files back on, or are they included in 2.1.
View 3 Replies View RelatedRecently purchased the Virgin Mobile Supreme (Sprint Vital, ZTE N9810). The one thing that is bothering me is that there is only one volume setting for the combined ringtone and notifications. I would like to set these volumes separately.
I tried one volume control tool, but even though it had 'separate' controls changing ringtone changed notification and vice versa.
I had motorola defy before my xperia z. Defy had something called bootmenu which let me switch on adb while booting a ROM. Now i have xperia z, its bootloader unlocked, a rom cooked by my own which is in bootloop. It doesnt have bootmenu to do like i did for defy. How do i switch on adb from the phone's side? I have setup adb perfectly on my computer.
My ROM goes into bootanimation but adb doesnt seem to be switched on in the phone' side.
when i type "adb logcat log" it is stuck at "waiting for device " while the bootanimation goes on into bootloop
im building a rom base on aosp kitkat but it will not boot. It just get stuck on bootanimation.
Any way to logcat on bootloop or something?
What ways I have to troubleshoot the problem or the cause.
Atrix HD using ProBAM rom
I installed an RUU with an update utility which fixed a WiFi problem I was having. Everything looked good so I immediately tried rooting with zergrush which seemed to work until my first re-boot. Now the phone is stuck in a boot-loop.
I have two utilities for RUU versions. I've flashed both of them at least three times each but its the result is the same every time. The phone boots normally the first time, then goes into loop on the next restart.
One issue that I noticed that when I re-lock the bootloader in fastboot, I get an error message. It goes something like...
(BOOTLOADER) Lock Successfully....
FAILED (unknown error)
However, when I go back to bootloader, it says **** RELOCKED **** at the top. Maybe whatever is causing the "unknown error" is also interfering with the re-lock procedure. It may not be truly re-locked.
I really just want to get this phone back to stock condition so that it works like it should.
my phone is stuck in a bootloop. and its Not rooted. all i can do is go to the boot menu. I want to use ADB to see if i can read the phone data (like sms...). Is there any chance that the device will be recognized when i connect it to the PC by usb with ADB?? or is it impossible? maybe ADB needs the phone to be operating normally to be recognized.
View 9 Replies View RelatedAre the framework-res and SystemUI apk's the only files that are involved in the boot process?
I only ask because I am currently stuck in a boot animation loop. I am able to communicate with my phone via adb during the animation loop and while in the bootloader recovery. Wiping the data and and factory resetting doesn't solve the problem.
I am thinking about pulling those two files from my wife's phone which is the same phone (Samsung Proclaim) and pushing them to mine.
I am stuck in a CWM bootloop. I can install rom and backup from CWM but it just boots back to CWM. If i try to get to bootloader for fastboot mode I get put right back to CWM.
View 2 Replies View RelatedI am selling my old galaxy s due to having a new phone and I have made it freeze when it boots.
It was flashed onto myICS when I was using it and before handing It over I wanted to wipe everything so it was clean for the new owner. I did this in the phone options and then also in recovery mode to make sure, but after rebooting it is just stuck at the galaxy s boot loader.
I tried flash another Rom onto it and the same thing happened even though odin said it was successful.
So my galaxy note 2 is continously bootlooping. As soon as I insert the battery into the phone, it shows the galaxy note 2 screen and a couple seconds later the same. I can't enter download mode because when I click the Volume+ button to enter it, it starts from the galaxy note 2 screen.
I had flashed cyanogen mod 11 to my phone a couple months back, but it was working fine. Today morning some water got on it, but I dried it of and it was working fine.
I have a rooted Xperia C. I tried to install Chainfire 3D without knowing that it's not compatible with jellybean devices. :facepalm:
now my phone is stuck at bootloop. it's stuck at the image after the xperia logo. I tried to go to recovery mode but I can't. Maybe because my phone is bootlocked.
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem.
I am making a porting rom aosp for nexus 4 to a LG optimus G, after doing the rom, the flash normally but the device stays in bootloop and how to get a logcat and see what the errors are.
View 2 Replies View RelatedI was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
I searched the forums, looked like everyone who had this problem rooted their phones and installed custom roms, however i did not tamper with the phone in anyway, no rooting or custom rom, just nothing, this is the 3rd time in 6 weeks i get stuck in an infinite restart loop, i did two factory resets and i can't just do another one.
So far i have tried:
1-installing an antivirus and scanning (nothing found)
2-restarting in safe mode, the phone continued to restart in safe mode
3-uninstalled new apps that i installed recently
there has to be a way!!
my phone is stuck in a bootloop. all i can do is enter the boot menu. I did a factory reset but the bootloop issue is still there. Im not root. S-on. I can only think of sending the phone to the htc repair center, or is there anything else i can do?? the phone is still under warranty. can i try going root or S-off in order to try to fix the bootloop?
View 3 Replies View RelatedI am relatively new to Android and last night was my first experience with flashing custom ROMs. After a couple months of reading many different articles and threads on xda and other sites, I tried to make sense of what rooting and flashing meant and was all about. I successfully rooted my device and then last night I tried to unlock the bootloader which I think I did correctly. Then, I tried to install CWM on it which I think also worked. The problems started from then: Rebooting into recovery didn't work (it only gave me a black screen) and I tried to find some solutions online. There wasn't much luck but somehow after many attempts, I was able to boot into recovery. From there, I wiped my data and settings (It wasn't factory reset before), wiped the cache, and wiped the dalvik cache which went all well I think. Then, I tried installing the latest CM10 nightly for the L7 and midway through installation, the phone just rebooted itself. And now, it's stuck on bootloop. I tried many different things and even formatted the system which I think made it worse.
The Quick Details:
-LG P705G (Canada, Fido) was running stock ROM V10e i think
-was rooted
-i think bootloader was successfully unlocked
-stuck on bootloop
-formatted the system and now only LG logo appears when I boot (no CM logo)
I downloaded Ditto Note 3 for my note 2, and i flashed it. It didn't work so whatever. After reading on the thread a little longer, it said i needed to flash a kernel. So after flashing ditto note 3 and the kernel i rebooted my phone to see that it was stuck on the Note 2 logo. I thought it was all fine until i booted into recovery mode to find that cwm would make my phone restart. I have backups of cm11 and stock touchwiz, can i flash them with odin? Can I go into my storage and take them out?
View 2 Replies View RelatedI recently got a Huawei y220 and rooted it and enabled USB debugging, tweaked the SystemUI.apk and it all went good, I had no problem rebooting. I also changed my bootscren with BootScreen from the Play Store.
But today, my phone got stucked in bootloop, and i know why, I changed the /system/fonts permissions to 666, and also when I was trying to change the default font (DroidSans.tttf and DroidSansBold.ttf) copied a font file, so in that folder there was some permissions changed and an extra font. I had to to do something so i locked my phone. When I returned a couple of minutes later the phone was like off, so i removed the battery and rebooted it. It got stucked on my boot screen, and didn't showed me my ADW launcher.
I can't install CWM as there is no file for this model (because it's very new), I can't flash anything as far as I know. Tried downloading the official "upgrade" from Huawei, copied the file, but I can't seem to enter the "Software Upgrade Mode", (VOL UP + VOL DOWN + POWER KEY), I press those keys for about a minute and nothing happens.
I know my phone isn't fully bricked, for now, so, how can I change those file permissions through my PC or Linux? I can enter the bootloader screen.I also tried AromaFM, but i get a signature error.I've already wiped/factory reset and wiped cache.