A boot loop happen after i tried installing cyanogenmod 7 early realease from this forum. Now the device stuck in boot and will display cyanogenmod 7 blue circle around 3 -4 seconds over and over. I need to do a factory reset, but now it stuck in boot loop and it does not have a key combination to go into recovery mod.
View 9 Replies
My samsung i5500 wont boot normally so I want to try booting it into recovery and resting it. I've tried power, center key and volume down. which I thought was the recovery combination but it just comes up with an icon saying downloading and does nothing. Any recovery combination or another way to fix.
View 9 Replies View RelatedI'm having trouble booting my LG Optimus G into recovery mode. I've rooted the phone and installed ClockworkMod recovery. When I try to boot into recovery, either from the ROMmanager app or by holding Volume Up and Power, it comes up with the LG logo and gives this error: Secure Booting Error! Cause: boot certification verify. It just stays like that until I press and hold the power button again until the phone shuts off entirely. Then I'm able to boot into the stock operating system and the phone works fine, but I can never get it to boot into recovery.
The error I mentioned above seems to be a well documented error on the internet, but it seems like other people that are having the trouble are completely bricking their phones. Mine is able to come out of it. All the solutions I'm finding pertain to a phone that's completely bricked and involve taking the phone back to stock. My phone works fine with the stock ROM, but I'd like to play with some custom ROM's.
I have LG P970 Optimus black. I know this problem is about a lot of devices and a lot of regions. We are using latin alphabet with some special characters. like "ı, ş, �, ğ, �.." when someone sends me a text message with this characters,
It is normally shown in cm7 and its based roms.
It is normally shown in lg roms which are released for turkey
but it is shown like one space in different lg roms.
For fixing it, what can i do. Is it about message apk? or about some libs?
I was trying to install CyanogenMod, but now it wont boot. It's just boot with a 'circle'logo, and nothing happends.
Please see my video on youtube: [URL]...
Is there anyway I can get back to get my phone back to working again? I have tried to hold down VOLUME UP and Powerbutton with USB-cable in, but still the circle-logo
My mom has a LG Optimus L9 p769. I'm trying to boot the phone into recovery mode by holding down the + volume button, the home button, and the power button. The phone will not boot into recovery mode. The phone works perfectly fine, I just can't get into recovery mode.
View 3 Replies View RelatedA weird problem appeared today with the phone of a friend of mine.I 'm a bit worried whether this might be a HW issue. The key combination does not bring the recovery screen.
View 1 Replies View RelatedI'm trying to porting cyanogenmod, but I have a problem unlocking the bootloader for recovery. Let me explain what I've done so far.
Root Phone via framaroot
Extracts recovery.img boot.img via adb
Code:
sudo adb start-server
adb shell
su
dd if=/dev/block/mmcblk0p9 of=/sdcard/boot.img
dd if=/dev/block/mmcblk0p17 of=/sdcard/recovery.img
exit
exit
adb pull /sdcard/booty.img
adb pull /sdcard/recovery.img
Initialized the project via mkvendor.sh
Code:
mkdir ~/android/system/vendor/LGE/vee7e
mkdir ~/android/system/device/LGE/vee7e
~/android/system/build/tools/device/mkvendor.sh LGE vee7e ~/boot.img
cd ~/android/system/
. build/envsetup.sh
make -j4 revoveryimage
make -j4 recoveryzip
I now have the CWM Recovery, and I inserted in my phone
Code:
cd ~/android/system/out/target/product/vee7e/
adb push recovery.img /sdcard/recovery-cwm.img
adb shell
su
dd if=/sdcard/recovery-cwm.img of=/dev/block/mmcblk0p17
Reboot the phone for enter in recovery mode (hold volume up + home button), and I had this surprise
Code:
[4380] -------------------------------------------------------------------
[4380]
[4380] Secure booting Error!
[4390] Cause: boot certification verify
[4390]
[4390] -------------------------------------------------------------------
In the attached you will find my recovery and the error message.
After update my Optimus L3 got in a "No service" situation. The strange part is that i have signal and im able to access the internet using mobile network (wifi off). After a long research i fugered out that my IMEI was 0 (zero). I finded a lot of solutions to this problem but none of then was compatible with my device or brand.
Its possible to perform this in an Optimus L3? How can i access the Port Settings?
(ultimate solution for several LG devices) Restoring IMEI
1.Connect phone by USB
2.Activate USB debug mode
3.Enter 3845#*920# in dialer if that doesn’t work try 3845#*925#
4.Select Port Settings -> Select CP Image Download
5.A new device should appear at let it install
6.Open Tutty and select serial protocol. Click on open
7.Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8.Type at%imei, it should display a dummy IMEI
9.Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10.Reboot phone
So I wanted to install a custom ROM to my P350 today and it seems I can't get into recovery mode. When I try to get into recovery, it shows the LG screen, shows that recovery mode screen, freezes on that screen, reboots and EVERYTHING ON MY PHONE GETS RESET,
I've tried 3 different ways to get into recovery, all of them have this result. It is very annoying that each time I try to get into recovery the phone gets a factory reset. How can I get into recovery?
My phone is on CM9.. i want to revert it in stock rom. my computer doesnt detect my Phone when emergency mode even i have drivers installed.
Is there a way to flash my Phone with the CWM recovery with the stock rom? .kdz file?
I cannot get into my recovery. Alright so i bricked my AT&T lg optimus g after trying to delete some bloatware after rooting my phone. I unbricked it by using LGNPST and got stock android 4.1.2. My software version is E97020j. The phone works perfectly fine but i cant get into recovery and i want to flash some custom roms. I can root my phone perfectly fine. The only way ive seen that unlocks the bootloader of the optimus g is a program called project freegee. When i try it, it tries to reboot into my recovery and bricks my phone. Then i have to use LGNPST again.
Ive used apps like clockwork mod manager and it says i already have TWRP and Clockworkmod recovery installed but it wont reboot into any of them. It just comes up to a black screen and says "Secure boot error, cause: boot certification verify." Ive tried getting into recovery using adb on my computer and using the old hold power button and up volume button method but nothing has worked. I cant find online how to get my old stock recovery image or how to fix the red triangle and i dont know how to uninstall TWRP and Clockworkmod. The methods for other phones doesnt work on mine.
i had a custom rom gingerbread and then i wanted to do a factory reset to go back to the stock room , instead this give me big problems. it is stuck on the lg screen and i try to go into recovery and alit says is do not pull out battery Formatting data , Formatting cache and Factory reset and this it goes right back into the lg screen where it gets stuck . My computer recongizes my phone but i dont know how to use adb commands thing like a pro . i have everything i need in the folder "backup" in the clockwordmod folder .
View 3 Replies View Relatedguide to get out of boot loop i did a wipe user data and factory reset on the settings menu and now i only get a lg logo and a animation of a android with a cube coming out of his torso area.
View 3 Replies View RelatedI own an LG Optimus L9 from T-Mobile. A few months ago, I rooted it and installed the Jarvis boot animation, complete with a Jarvis start up sound.
I started having issues with my phone, so I performed a factory reset. However, the boot animation is still the Jarvis one. I need to send the device in for a repair, and I need it back to the original boot animation (one where there was white and pink squares that did a wave animation, along with the T-Mobile jingle.)
My phone is stuck at clockworkmod recovery 3.2.0.1, and it wont even load up to the stock screen of android, I've tried zefie's technique of putting the phone into emergency mode, but it still didn't work.
View 7 Replies View RelatedI accidentally flashed the wrong recovery onto my LG Optimus V. The phone is stuck in a boot loop and I am unable to make a selection in recovery. How can I flash the correct version of clockwork mod without doing it through the phone?
View 1 Replies View RelatedI recently rooted my LG Optimus L3-8C (E400) running stock rom and version 2.3.6 Gingerbread (yuck) and I followed all the instructions from this video:
in order to flash the CM9 ROM. Problem is I can NOT reboot into recovery no matter what I do it seems. When I try tp reflash the CWM recovery it tells me "successfully installed!" then when I press 'reboot into recovery" it gets stuck on the LG logo for so long I often have to hold the power button to go back to my device. I even download "recovery flasher utility" found here [URL]....but, whenever I run the app it tells me "no recovery.img" found onexternal SDCARD even though I placed it there! I tried to fastboot but whenever I run CMD it tells me " 'fastboot is not recognized."
I'm trying to root my T-Mobile L90 as per this guide: [URL]
But T-Mobile has locked out Recovery Mode so that button combinations and "adb reboot recovery" do not work.
Any way that I can remove this restriction or force recovery mode?
Im really stuck, my phone is rooted, is deleted something that i didn't know was important(with titanium backup pro) and it failed everytime to restore, so i tried to reset my phone to default setting.
But guess what, my phone boot but stop at "the application settings(process com.android.settings) has stopped unexpectedly. Force close )
I got a back up of the original rom that i made with clockworkmod so i would like to restore it. But i cannot boot in systeme recory mode
i tried:
vol up/down + home + power = no result
vol up/down + back + power = yellow and it says "emergency mode!! but nothing happen"
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
I had done several things before (rooting, installing cwm recovery through rom manager, etc) until my phone got bricked, and tried a lot of things until i have flashed Cyanogenmod, and it woks just fine (and its cool), but I have changed it back to original stock firmware using KDZ flasher. Now, I tried to boot my phone in recovery mode (by holding volume down+back+power button) and CWM recovery is booted. I want to get rid of it and restore back my original recovery, because, i suppose, it was the reason why my phone was bricked before (i wiped and formatted the system and updated the firmware using fOTA, and the result was a CWM bootloop)
View 4 Replies View RelatedHow to start my LG Optimus Net P690 in recovery and downloading mode?
Which is the latest stock firmware available for my LG Optimus Net, my PC suite is always showing that no new version is available, but I am having 2.3.6 in my Galaxy POP while in LG its 2.3.4. LG Optimus Net is actually launched later than the galaxy POP...
Where I can find the LG stock firmwares? Is there any Custom ROMs available for LG Optimus Net P690?
I have lg optimus e 975 indian version . I have accidently restored my phone to factory settings there were some important videos in my internal. I want to recover those videos Those were very important.
View 2 Replies View RelatedMy stats:
LG L35g Optimus Logic from Net10
Running Android 2.3.6
It is rooted.
Clockworkmod 5.8.4.5
Okay, first off this is totally my fault that this phone is stuck.
I was inside the About menu of android and saw there was an update for 2.3.6
So, stupidly, I decided to select it. It downloaded the update, rebooted, and then wound up at the clockworkmod recovery screen.
I tried the "reboot system now" option, but it just reboots back to the recovery screen.
I have used the "wiped data/factory reset" option. I've wiped the cache partition and Dalvik cache.
I didn't backup the stock rom, so I found these two roms for the l35g from here:
AA51
Stock (user modded version)
I used the restore option in recovery mode, but the "Stock" rom above didn't take. The AA51 rom did install fully and told me to reboot. I did, but it still went right back into the boot-loop!
I think the solution to this is to fix the boot-loop issue. Would Zengarden or Xionia work? Then, if so, I need a version of it to work with the l35g.
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
I'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead. I'm attaching my current bootanimation.zip