I use music application (PlayerPro) and a time (LafayChrono). Problem, the clock application serves medias volumes output, not the alarm volumes output. So, I can not set the volume independently of one another.
My question is, if it is possible to "root" the sound output of an app to another type of volume (LafayChrono to alarm volumes output) ?
View 3 Replies
When I connect my Droid RAZR MAXX or ASUS Transformer to my HD monitor, the video displays fine, but there is no sound. I suspect this is because the monitor does not have any speakers, but I was hoping there would be a way to just let the audio play from the device. That's what my laptop does when connected via VGA (which might not support audio anyway; I don't know a lot about the different inputs/outputs).
View 2 Replies View Relatedfound an app that will allow me to send audio to a bluetooth receiver / speaker AND allow me to use headphones / wired speaker at the same time??
I'm not rooted. If this could be done via rooting, I might just consider doing it.
AND, while I'm asking, can the audio signal be sent to and received by two different bluetooth receivers at the same time? I currently only have one bluetooth audio receiver, so I can't try it.
I know this might be a silly question and probably not usefull to many but i am trying to connect audio out via bluetooth and out the headset jack at the same time
View 1 Replies View RelatedMy MID mini-tablet (Android OS 4.0.3) has a mini-HDMI port. I have the mini-HDMI to female HDMI adapter and HDMI cable. Can I output music from the supplied music app to an audio system using HDMI? (Using the headphone jack is not practical due to the low volume output by the device.)
View 4 Replies View RelatedI'm toying with the idea of making a car dock for my Droid. The official Droid dock doesn't work with any cases and if the iPhone is any indication, no one will ever make one that does. Plus, it doesn't do everything I want.
I want to plug my phone in with as little fuss as possible, have it charge, output audio to my car stereo through USB. Charging is absolutely necessary, and I want to avoid using the headphone jack for audio if I can because it's an extra thing I'd have to plug in rather than just sliding the phone right in the dock. Better yet if the USB audio output is a constant volume intended for control on another device.
So.. Is it possible? If I need hack a car charger in to a usb audio cable I'm fine with that (unless I could get both in one). This thing would do it, but it looks like it has more pins than standard usb (can't really tell in that pic, but maybe someone knows?), and the Droid doesn't.
My other options are connecting the Droid directly to the head unit via USB and mounting it as a mass storage device, but I prefer the way the Droid handles music better than the head unit, and mounting the USB is an extra step I'd probably get too lazy for. And finally, I'd considered making an app that spoofs an iPod, since my HU has iPod controls, but that's more work than it's worth when the Android music player's controls are just as good.
I subscribed to JetFlix, in the market. (Jetflicks! TV - Android app on AppBrain) It is a $3 app with a $10/month subscription. I watch it on my phone in my car at the lake during my lunch break. I know that probably sounds sad, but it is AWESOME. I'm a manager in the dang corporate world, and I forget that I am at work by the time I'm done with a movie and come on back to the office. It's my dirty little secret. ANYWAY, there are some great shows available on this application, and I was thinking of replacing my Netflix subscription with it if I could just stream it to my TV at home. I haven't bought an HDMI cable yet, because I don't have a use for one just yet. But is anything "streamable" to the tv? I read that only pictures and videos that were shot with the camera stream though the HDMI cable. If that is the case, what is the point? I keep all that stuff on a hard drive anyway. So my question: can I hook up an HDMI cable and stream Jetflicks to my TV? The Jetflicks movies play on the native Internet browser. So I guess a more accurate question would be: Does the native internet browser display on the TV through the HDMI cable? If so, is there audio?
View 10 Replies View RelatedI'm trying to play a music (using MediaPlayer) during a call and want the caller to hear the music I'm playing. Unluckily it doesn't seem work at all, the caller hear nothing even I set the music volumn to MAX ( of course, the speaker and the mic on Android are far away from each other). Is there any ways to route Android's audio output to its Mic? Or something like "Stereo Mix" in Windows?
View 3 Replies View RelatedI'd like to use my Moto Droid in my car using as few as cables as possible. Does anyone know if there is way to connect just the USB cable so I can charge the droid and get analog audio too? I would like to connect one cable to the droid when I get in my car and not mess with the 3.5 audio connector or an FM modulator etc. I was thinking there may be a cable that connects to the droids usb and can charge the droid and have a 3.5 auxiliary audio output to plug into my stereo.
I read a few of the threads on the forum but couldn't locate the answer and it doesnt seem any of the similar 3-1 or 2-1 products I find list the moto Droid as an approved device. (HTC Multifunction Audio Adapter for CellularSouth HTC Hero / HTC Hero / Sprint Hero / T-Mobile myTouch 3G, myTouch 3G Fender / Verizon HTC Droid Eris - Phandroid Store)
I was playing around with some of the live wallpapers and thought it'd be neat to try to make something like the frequency/waveform visualization wallpapers, but I'm not sure there's an API to get the audio output data from the device. I know you can use AudioRecords to get this sort of data from microphones. Anyone know if there's a way to manage it for a device's output?
View 2 Replies View RelatedDoes anyone feel that EVO's media audio output volume is low? I am a former iPhone user and IMO there is a noticeable difference in the overall output db level compared to iPhone only when playing audio files like mp3 and .wav. Does anyone know if there is a way to boost the audio output volume for non rooted users? Is there an app that could help?
View 13 Replies View RelatedI want to output Android's camera output to a PC through Wifi or Internet.
I cant find a suitable app for the purpose. I did try to find one.
Closest I came to was MirrorOp Sender, but it shares screen?
I have a Galaxy S3 I9300 and a Galaxy Mini S5570
Fine for using headphones but I plug mine into aux on my car radio. Could be louder to be honest. Just wondered if there was any way to increase the max volume output?
View 3 Replies View RelatedOk we all know that our evo music playback on headphones is ridiculously low especially if you coming from the iPhone, but today I found Astro player beta which have some good equalizer that can boots your audio output to new level,even louder than the iPhone 4 output with the same headphones,so try it out and keep in mind its still in beta stage so it force close a lot but it doesn't affect music playback when it does that.
View 3 Replies View RelatedCan android apps share access to the audio output? I sometimes use Maps Navigation, which will give audible turn by turn instructions. I plug the EVO to my car stero using a patch cord so that I hear the instructions over my radio.
However, if I'm using another application that outputs audio, like Pandora or the music player, they go silent as soon as Maps speaks an instruction.
What I would like is for the apps to be able to share the audio output with some kind of priority set, so that Pandora would pause momentarily while Maps spoke an instruction and then resume.
Is that possible?
I am looking to develop an application and would like to know if the earpiece audio output can be captured.
View 1 Replies View RelatedIs there a method to access the digital output of the audio codec without first storing it into a file, a streaming output?
View 5 Replies View RelatedI have a little issue here with my droid's audio output: it seems to be randomly deciding it should come out of the handset rather than the speaker. I notice this happens often when I end a call, that the audio doesn't switch back to the speaker, but it also seems to happen completely at random - for example, it happened at some point when I was asleep last night, which prevented my phone waking me up when my mom was trying to call me this morning, because the ringtone came out of the handset, and thus, was too quiet for me to hear.
Using google voice, I found a workaround - I set voicemails to play through the speaker instead of the handset in the app, so if I go in there and play a voicemail, it'll switch me back to speaker. I can also sometimes get switched back to speaker by making a call, but that's inconsistent, since calls are just as likely to cause the problem as to solve it. I don't know if this is being caused by an app or not.
the file, which defines the places included for a device encryption. Is it vold.fstab? I am asking, because I want my external SD also be part of the device encryption process.
Btw: I am running CM10.1.
I'm trying to debug a crash I have when after I have ported a rom, here's the output:
Code:
E/AndroidRuntime( 1327): FATAL EXCEPTION: main
E/AndroidRuntime( 1327): java.lang.RuntimeException: Unable to create service com.android.systemui.SystemUIService: java.lang.NullPointerException
E/AndroidRuntime( 1327): at android.app.ActivityThread.handleCreateService(ActivityThread.java:2386)
[Code] .....
0 more
Is there anyway to get
Code:
E/AndroidRuntime( 1327): ... 10 more
to actually show the other 10 lines so I can do a complete trace?
Can i stream my whole audio-output from my android device via a random protocol to my PC?
View 7 Replies View RelatedIs it possible to force Android to output ONLY stereo over a HDMI connection?
My Denon receiver initially receives a stereo signal from my Asus TF700 tablet, but after a few minutes the tablet starts outputting a 7.1 signal (3 front, 4 surround, 1 LFE). I've tried modifying audio_policy.conf but it hasn't seemed to make a difference. Is there anything else I can try, or a tutorial on how to add a limited 'hdmi' entry to the audio_policy.conf?
Just (finally) got 4.1 on my One X, and I've been trying out Google Now but there's one thing bugging me. When it gives me the search results, there's no "speech output". I know that this is because my language setting for the app is "English UK", and it'll only output speech when it's set to "English US". However when it's set to the US variant it doesn't recognise my voice very well, obviously because I have a British accent.
My question is: Is there a way to enable speech output on Google Now without setting the language setting to "English US"?
I have searched a lot over google etc. about knowing if the smartphones with HDMI output capability actually outputs 720p or 1080p on HDTV or it is just that the screen resolution is upscaled to HD..
I can understand that all HD games are high in graphics but they are not actually 720p resolution certainly..but i am talking about HD movies which are of 1280*720 resolution which plays on my xperia neo v like a true HD video with high density of my screen with bravia engine enabled it looks awesome on my mobile..
But my query is when I connect it to HDTV by HDMI cable provided with xperia neo V...the same HD (1280*720) does not seems to be like HD..So is it that it outputs the mobile screen resolution by upscaling even in the case of HD files ?
Is that just happens with xperia neo v or all the android smartphones with HDMI output capabilities just upscales the resolution?
how to make the HDMI output for HD videos look as good as possible..(specially on my xperia neo v)
I have downloaded hdwin player. It only works on rooted phones. So then I start researching rooting my phone. Checked out urevoked web site,that software doesn't recognize my phone. I also checked into z4root upon more research ,this is only a temporary root. In the friggin 5 hr. Reading process I managed to spider my phone screen, and break the screen on my personal laptop. All I am tryin to do is be able to play a movie on my phone and have it appear on the t.v.
View 4 Replies View RelatedI am thinking of buying an Iconia Tab A1-810 which I plan to sometimes use to watch movies on my TV. Since it has an HDMI port I assume it will be pretty straightforward but my question is will it be able to output 1080p or at least 720p movies on my TV. Will there be lag or something?
View 4 Replies View RelatedGoogle's free navigation used to be a selling point for the OS, but it currently has some issues. Prior to Android 2.3, there used to be separate volume levels for media and navigation. However, these got combined into media so you can no longer tweak your navigation volume independent of your music. The end result is that the only way to make navigation audible in the car is to have the stereo volume at a level that would cause the music volume to bother many people (I usually drive with two toddlers in my car).
But there's another thing that I noticed. Switching between Bluetooth output to line output (the car's AUX input) has an effect on volume, but not one that makes sense. Music played through Google Music (and other media players, including PowerAMP) is louder over Bluetooth. I have to have the volume at 2 bars in my Fusion on Bluetooth to match the music volume set at 4 bars on line out. But here's the weird thing, navigation volume is not effected. It sounds the same on both, meaning that it suddenly becomes audible on line out.
Android is doing something weird where it amplifies music over Bluetooth, but not other sounds. As it stands, Bluetooth is more convenient, but it makes turn-by-turn navigation more difficult.
I will have a list view on the top and a button on the bottom in the view. Regardless the height of the list view i would like to fix the button position on the bottom all the time. If the list view is too long then make it scrollable.
View 5 Replies View RelatedWith Android, you can define different resources for different phone attribute by naming res directories appropriately. I need to be able to support different layouts for 480x800 and 480x854. I figured I could have one set of resources stored in the layout-hdpi-v4 directory and another in layout-long-hdpi-v4. However, both resolution seem to think that they are long (at least based on the emulator, which I understand may not reflect devices accurately). Is there another way in which I can distinguish between the two resolutions/aspect ratios?
View 2 Replies View RelatedI'm starting to design my object graph for an OpenGL ES 1.1 app on Android. What's advisable when it comes to actually drawing my triangles and controlling their size? Should I store all the vertices in units relative to each other and then multiply them by a value I pass during a draw(GL10 gl)? Would this approach have any impact when it comes time to do frustum culling?
View 1 Replies View Related