i have dtc GT7 Astroid max only logo then restart,,..dtc gt7 spredrum 6620
i tried to wipe to recovery and format to volcano but same problem..
i think need to flash...
where i can get the flash file and how..
View 1 Replies
So my Droid X hung just now. Is there a reset button somewhere or do I just do the old school approach and take the battery out?
View 1 Replies View RelatedThis has happened to me several times in slightly different cases. Several times I've mistakenly placed calls to the wrong people (due to just messing around with the phone).
In a panic, I pressed the "back" button thinking that it will cancel the call. It didn't. I also tried the "home" button. Also no good.
I had to drag down the notifications bar to see the phone call in progress and finally access the red Hang Up button. That worked. The problem is that is is SLOW. And worse, one time the phone would not respond to the button press until after several tries (maybe the CPU was busy on something).
Anycase, that would appear to be a major problem with all these touchscreen-only smartphones - lack of a physical Hangup button.
Is there any workarounds to this? Perhaps some sequence or combo of the existing physical buttons to forcefully hangup an errant call?
I have noticed that when aps restart my phone, it takes about 15 to 20 seconds to restart When i Power down, it takes MINUTES!Does anyone know of simple restart app I could use to avoid this? If not, anyone know someone who could make one?
View 3 Replies View RelatedI am developing a ToDo reminder type of app for android. on creation of a new reminder an alarm and vibrator scheduler is created with a toast. This works on intents and broadcasts and is pretty straight forward stuff with putextras using the reminder id from the db. My problem is, if some one restart the phone, i guess all the scheduled alarm and vibrator tasks for the reminder will be killed. Once the phone restart again how to recreate the scheduler tasks.
View 2 Replies View RelatedI'm trying my hand at porting a ROM to my device (S4 HTC One X/XL, Evita) and I've gotten as far as the bootscreen, but it hangs there (with the bootanim still running). I'd like to take a look at what's happened on the device, but I can't seem to use adb with it at this point. I've made sure drivers are installed and used multiple USB ports. ADB works in recovery and fastboot works in fastboot, but adb returns Offline when I run adb devices while the phone is sitting at the bootscreen.
Found this on StackExchange: [URL]......-for-debugging
According to some of the replies, it's possible to use adb at boot, so I'm not sure why adb returns offline. I tried running adb logcat while the phone is off and letting it boot, but adb never establishes a connection to the phone. Not sure why it can't. Hopefully it's not another adb driver issue. I've already spent a ton of time getting adb working with this phone while booted/in recovery.
My texts sometimes hang on "sending". this almost always happens when i'm texting my two brothers. maybe it's something about texting more than one person? maybe it's something about texting them? and sometimes it works, sometimes it doesn't.
I'm using straight talk and my phone is all the way updated to the latest apps and android.
canvas turbo hang at logo. and get heated. i can't turnoff it. but it open in recovery mode. how to flash new rom in it. sp tool not working because battery is inbuilt. tell me another way to flash a new rom in canvas turbo
View 2 Replies View RelatedI own a Samsung Galaxy S2 smartphone (GT-I9100) and have installed NeatROM Lite (build number: XWLSW NeatROM Lite v4.8).
I'm developing apps and each app crash (for example occured NullPointerException) causes to freeze the device and after some minutes maybe to hot reboot (NeatROM splash screen but I don't need to enter my SIM PIN again).Maybe, because sometimes it reboots by itself, but sometimes I need to hard shutdown the device (pressing and holding the power button).
I tried to debug the application, but the only information I could get was that an exception of type RuntimeException occured.When I activate the debugger for the crashing app, the phone will not restart. The crashed app will just close.
I guess that something is wrong with the "app crash" dialog from android. I've never seen this dialog on NeatROM and when it should appear, the described procedure happens.
Recently, the operation system of my android phone has got a slow speed. what's more, it sometimes restart automatically.
View 2 Replies View RelatedI have a Problem with my A7HD. After restart all my settings and apks are gone.
Starts with Korean language (before german)
Starts always like a brand new one.
So now I fully optimized my galaxy mini, and I have cyanogenmod 7 mebitek slim, I did everything to optimize it, installed V6, overclock 825 Mhz, killed every unnecessary task, even killed launcher by THIS way, have 230 MB free RAM of 279(true free about 205 MB) and now in RAM when I play a game there is just android system task and dialer task, and I was wondering, is there a way to kill dialer, because when I kill it with Task Killer ProMax Mini and select root kill, it kills dialer, but it auto-restart all the time...
So, is there a way to kill it without after killing auto-restart?
I made a tasker profile to scan face in every 15 seconds by using another plugin (smart stay). Some situations it gives "unable connect camera" error. When I run restart camera app I can fix this issue.
How do I fix "unable connect camera" error by using terminal command. Because I planned to run that command right after (after 5 seconds delay) tasker trigger face scan action.
After a flash update the phone does not restart..When I try to flash it, I have a error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054) [EMI] Obtain DRAM Failed!"
However I think that my phone is not a true Goophone, Before the fatal flash, I have test and make a backup with MTKDroidTools and It was stated that the processor was a MTK6589, but it was a fake and it was actually a MTK6572
I have the same problem when I use my original Backup.when I plug my phone on the computer, the device manager said "MediaTek USB Port(COM7)".
Since 3 years I had upgraded my Android 2.1 Flytouch 10.1 Tablet into Flytouch 2.2. #3245 version, without any major problems.
My only problem was that I was not able to use Titanium back up and some other apps unless I was rooted, so after many attempts.I succeeded to root it and to be able to use it. Until the time I decided to upgrade my BusyBox to the latest version. After that I rebooted.my tablet with success but only for once because since then it freezes at start up.
I am having a problem with my galaxy note 2, jellybean 4.1.2, rooted
After I restart my device, some apps stops working, when I clikc them, it says unfortunately, the app XXX stopped working.. with no report option.Also, some apps that still working, their data just get reset.. like I have never opened them..
I tried a factory reset and flashing new jellybean version (4.1.2) but I am still having this problem.. tell me whats happening? It's like the device is not loading the apps after restart or what exactly?
I have a Trio Stealth H-10 (MST10-21) that has the android 4.1.1 version software. Two days ago after I had finished using the tablet, I shut the tablet off. Upon restarting the tablet it started very slowly and the first screen that came up was asking what Language I wanted. From then on it was setting up the tablet again just like the first time it was used. I reset all the info. When I went to the app store to re-download my apps, it would not down load anything. I restarted my tablet again and everything started all over. Every time I restart the tablet, everything has to be reloaded. It seems like it is doing a factory reset every time it shuts down.
View 3 Replies View RelatedI' ve got some S4 clone phones and one of them suddenly after a restart couldn't boot. Neither my PC recognizes it as a device. I changed it the battery with other which were fully charged but nothing. I tried to boot in recovery mode or download mode and nothing. The phone is dead.
View 1 Replies View RelatedMy Galaxy S3
GT-I9300
Newest Firmware I9300XXUGNA5 / I9300DBTGNB1 (DBT)
16 GB
NOT rooted / original ROM and absolutely unmodified
is restarting all the time and so caught in a bootloop. Most of the time it restarts when reaching the PIN or Code screen, sometimes I mange to enter the code and can see the desktop for some seconds. Then it restarts, endlessly until I remove the battery. Most of the time it directly restarts in the bootlop when putting in the battery, but sometimes not and this way the recovery and download mode can be accessed.
I need my phone and some data on my phone so urgently (unfortunately some are directly on the phone).
What I tried:
- remove battery for hours
- load battery for a long time (over night)
- recovery mode -> delete cache
- starting with / without SIM
- starting with / without SD card
- managed to activate flight mode within seconds in loop
- used other battery
- flashed original firmware with Odin two times (4.3, I9300XXUGNA5)
But ... It restarts again and again. I really want to avoid a complete reset due to the fact that there is really important data on the phone and in addition some really unique photos. I don't think that there is a hardware defect since the hone sometimes starts untill it reaches the main screen.
Possible reason: I use "HD Widgets" and there are some widgets on the main screen. When I manage to see the main screen for some seconds I can see the widgets loading (emty spaces with progress bar). I use this app fore some time but maybe there was an udate causing problems. Maybe this app or others are the trigger.
y tablet is ( i-life wtab 704) android 4.0.4
today i tried to root my tablet with z4root .
After that i rebooted and everything gone as like as the( factory rest )
So i began to install apps but the system give me a Message said (there is no enough memory)
I checked the storage i found the internal storage zero, then i rebooted it after that . Everything gone !!!!!!
But I noticed something .....
before trying to root my tablet ..i didnt have a recovery mode on my tablet ....when i try to press the 3 buttons (power + volume up + volume down) it didnt refer me to the recovery mode but keeps the screen stand still then reboot ( because its locked i think so)
but after use z4root ...when i do factory reset it shutdown then refer me to the recovery mode mentioning that i didnt install a recovery mode
I made a wipe/factory reset...and made a cache wipe but nothing happened and The problem remains as it is.
I own a Karbonn A9+/Cherry Mobile Flare (JB 4.1.2), with CMX JB as my current ROM.
Now, I had got a problem with my device once when I restarted it. My phone just showed me the splashimage for about 2-3 mins and showed a blue screen, which just stuck to it. I removed its battery & restarted it, but it just booted up the same blue screen again.
I solved it by restoring my system.img by my previous nandroid backup. But still, I'm curious to know why and how the blue screen appears.
Screenshot:
Every time I reboot my phone it keeps changing my background back to the same stupid image below. I think I'm probably going to go insane if I see this stupid grass anymore. The picture isn't even on my phone (anywhere I can see, obviously.) I don't know what to do. I've flashed several Roms, done several factory resets, changed it to a million different images/live wallpapers.
View 2 Replies View Relatedmy tablet is ( i-life wtab 704) android 4.0.4
today i tried to root my tablet with z4root .
After that i rebooted and everything gone as like as the( factory rest ) so i began to install apps but the system give me a Message said (there is no enough memory) i checked the storage i found the internal storage zero then i rebooted it after that . Everything gone !but i noticed something .....
before trying to root my tablet ..i didnt have a recovery mode on my tablet ....when i try to press the 3 buttons (power + volume up + volume down) it didnt refer me to the recovery mode but keeps the screen stand still then reboot ( because its locked i think so) but after use z4root ...when i do factory reset it shutdown then refer me to the recovery mode mentioning that i didnt install a recovery mode.
in the recovery mode
...i made a wipe/factory reset...and made a cache wipe but nothing happened and The problem remains as it is.
I have a Samsung Galaxy S2 and I rooted it successfully.
Then I tried to install a CRT-style lock animation mod. For this I had to copy a new file into the /system/framework folder replacing an existing one. Once I did that my phone won't boot.
It restarts with the Samsung Galaxy S2 logo and the yellow triangle. Then the sound plays with an android text style logo. Then it just turns off.
What do I do? How do I transfer a ROM over so I can flash it? My CWM is v4.0. something so it won't read a ROM from my external SD card. And Kies won't load my phone because it isn't booted onto an OS.
While using my Galaxy i9500 it crashes and phone automatically restarts with 0% battery percent
I tried this Battery Calibration app but it didn't work It says battery stats file doesn't exist!
I tried installing new rom but now as soon as I turn on the device it works for like 2 minutes in its real charging percent (e.g 60%) then crashes and restarts to 0%
The battery is original and It's not swollen.
I made an custom ROM.... but as I shutdown mobile and switch it on again then it is not going to on...To start it back i have to pull out the battery and then reinsert it again and then it is starting...And if i reboot the mobile then its rebooting....but if i shut it down and turn it on back then problem persist...
View 2 Replies View RelatedI download apps from play store, amazon appstore and other places..
When I restart my phone, Some apps (no matter where are they from (play, amazon, etc.)) They stop working.. they dont work anymore.. and I will have to re install the apps again and loss all data
And also some apps that still work, they start like its the first time I am starting them and all data in them are lost..
I tried multiple things to fix this like I factory reset my phone and also tried to flash new version of stock rom but I still have this problem.
My device: Galaxy Note 2, jelly bean 4.1.2, rooted (no custom rom indtslled)
my mobile is Samsung grand i9082 i installed AC!D Audio mod on my new mobile after install my mobile not restart it stuck on Samsung Galaxy grand logo.
View 1 Replies View RelatedI have had my sprint HTC Hero for some months now and love all the neat apps I can load. BUT... the actual telephone app seems dysfunctional. I imagine the telephone function is built in and probably cannot be fixed by the average developer and maybe this is also a function of the carrier (sprint in this case).
PROBLEM:
When I have multiple calls my Hero interface provides no easy mechanism to hang up on one caller only. It has just one "End call" virtual button and pressing this drops the entire call interface.
So for example if I accept a call waiting then the prior caller is placed on hold while I talk to the interrupting caller. When I am done talking to the interrupting caller I have only the option to "End call". Pressing this will drop the entire call interface. What happens next depends ...
IF I have hung up on the interrupting caller before they hang up on me then I will still have someone on hold (but nothing shows this). Some seconds later (like 5) the system realizes I still have someone on hold and rings as if a new call. Clunky but at least it works.
IF the interrupting caller manages to hang up before my "End call" registers then the phone ends the only remaining active call which is of course the person on hold. No indication of this either except I wait 5 seconds and realize my phone is not ringing. The lag time on the HTC hero is so large that this happens just about half the time.
IF I don't hang up at all but instead just wait for the interrupting caller to hang up then the phone will put up a new screen that shows that the person who just hung up is still active, the person on hold is on hold, but in fact I will be connected to the person listed as "on hold". So the interface is wrong but at least I have not hung up on the holding caller. In this case it is very unclear if my call waiting slot is free or not. I have had people unable to call when I thought the phone was connected to just one person. Effectively the call waiting slot seems already occupied when in fact it is not. Don't know if this consumes double minutes or not.
To me this seems like an event driven system without a properly deterministic event handler. Or perhaps there is really no way for the phone's understanding of call waiting to by synchronized with the carrier's.
Almost done ranting...
Lastly, while making a call the screen seems to stay active for its full timeout period so that my cheek can sometimes press a virtual button and end the call. I would love it if I could press a button to de-activate the screen sooner but unfortunately that button also terminates the call. Wasn't there supposed to be some mechanism that detects that the phone is cheek bound and deactivates the screen? Could use a manual way do force this.
I'm having some trouble and can't seem to find the answer to this! When I have 2 people on the line I can only seem to hang up on both.
View 1 Replies View Related