General :: CWM Recovery Image For LG E739 / C800 / Mytouch Q
Feb 19, 2012
How or where do I find a cwm recovery image for the above phone? I tried using dd in adb to put one on my phone but it doesn't work right and rom manager does not list anything close to my phone as far as I can tell.
View 3 Replies
Sep 10, 2012
I have a question concerning the internal storage the E739 has.
Currently it has about a gig more or less of internal storage, so here my situation. I recently have gotten a new phone, and want to hand this one (e739) down to my son. The thing is I do not have an extra SD card, nor money to purchase another. Is there any possible way to maybe partition some of that internal storage to an emmc mnt? I wouldn't need much just a little for some games (emulators, some of them require an sd card.), and place to save a few pictures so he can use the camera.
View 3 Replies
View Related
Oct 13, 2012
Ok i recently rooted my LG C800 or Mytouch Q using SuperOneClick which went well. However, When i tried to install a new rom using ROM Manager of the play store i first backed up my current rom and when it reboots its stuck on the boot LG logo. I have tried going into recover mode and it will show the android unboxing but a few seconds later it goes back to the LG logo. I don't want to say its completly bricked as i do get the LG logo.
View 4 Replies
View Related
Jun 2, 2012
so I'm collaborating with a couple of members to port MIUIv4 from the e730 to the e739. The only difference between the two phones is the kernel.
I've fixed data, i can use Perl scripts, winrar, NotePad ++, (bak)smali and anything i can find on the internet.
Our ROM boots, but there's a screen corruption issue that needs to be addressed.
My question is: what could be causing it?
Tried:
-using cm9 hardwarerenderer
-adding "write sys/class/graphics/fb0/state 1" to init.victor.rc"
-htc one x brightness toggle.instructions for a similar problem.
View 3 Replies
View Related
Jun 25, 2013
I accidentally flashed the wrong recovery image on my karbonn a4+ using mobileuncle tools . The phone is stuck in recovery mode and I am unable to make a selection in recovery. How can I flash the correct version of stock recovery. i cant factory reset in my phone.
View 3 Replies
View Related
Feb 25, 2013
I have rooted the just purchased Spice mi-530 with "Root_with_Restore_by_Bin4ry_v18". However there is no CW recovery or Custom firmware in the XDA Threads.
I just know little bit of Android and able to manage with trial and error.provide the Recovery image or zip files. I have put aside my Galaxy note one and shifted to Spice mi-530 because it is fast and smooth. I was also able to see flawless films and videos.
View 9 Replies
View Related
Nov 28, 2013
I just got this phone from HSN, Samsung Galaxy Light model SGH-T399. Well my friend thought it was a smart idea to flash this phone for root and I was at work. So now the phone stuck on the Samsung boot screen.
Need stock Recovery image and stock ROM so I could see to revert it back to working condition as when I bought it.
View 8 Replies
View Related
Sep 11, 2011
Is it possible to extract the recovery.img (the stock one) so that it can be flashed back onto the custom recoveries?
View 4 Replies
View Related
Aug 11, 2013
I've recently bought Orient H920 phone and accidentally ruined my recovery partition. Have stock ROM dump or suitable recovery image?
This phone is also known as Butterfly H920 or Tianhe H920. Another unpopular name for it is MX58TAir. Probably this phone is also Star X920, but I doubght. I found to suitable/flashable ROMs, one is MX58TAir.TD.HD720P.130628.CN, everything works but no support for dual sim. Another is H920.130422.EN, probably stock ROM, however display driver doesn't work. Changing UBOOT file doesn't work.
View 5 Replies
View Related
Nov 1, 2011
Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.
I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.
# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions
What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.
Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d
What I have looked at so far: [URL] .....
View 2 Replies
View Related
Dec 3, 2012
How To Extract Stock Recovery.img From an android device ?
View 9 Replies
View Related
Aug 18, 2010
I flashed the custom recovery image instead of the temp way. Does anyone know how to get the orginal one back on it. Im taking it back dont want verizon pulling some stunt on me
View 6 Replies
View Related
Apr 24, 2012
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
View 1 Replies
View Related
Mar 19, 2013
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
now i can access only to pink screen, but when i connect my phone with a usb cable then computer only checks drivers etc but does not open a drive where i could change recovery.img back to normal.
Maybe some drivers are missing.. Also made video of it: [URL] ....
View 7 Replies
View Related
Oct 16, 2012
how to install a Rom on a HTC Glacier..
I Have a Mytouch 4g Glacier
Android Version 2.3.4
Software Number
2.32.531.1
Baseband 12.62.60.27U_26.13.04.19_M
Build Number
2.32.531.1
Kernel 2.6.35.10
WHY IM INSTALLING A ROM?
The awnser to the question is simple i have a problem with my Signal, the internet of my cellphone is 2G doenst go to H+ why, dont know and no one have the awnser to that... beside that i only have 1GB of internal Space.. and should be 4GB So thats why i decide to install a Rom and if there is a way without ROOT.
View 9 Replies
View Related
Mar 27, 2012
By the way 2.3.4 is Gingerbread, I have a MyTouch 4G, and I have the stock ROM from T-Mobile update on it. My question is, is there anyway to root 2.3.4?
[Not Edited, but thought I should add] If there is no way to root 2.3.4, I will downgrade to 2.3.3.
View 3 Replies
View Related
Nov 11, 2011
My friend is currently locked out of my LG MyTouch. She used a pattern lock and can't remember the Pattern nor her Gmail account or her password. With the past two Android phones I had, I would just Boot into recovery (Vol. Down & Power button), but this phone won't load into one. I also tried Vol. Up and Power. Nothing. I then tried both, but it went into the "S/W Upgrade" screen. Is there anyway to bypass this without having to send it back?
View 9 Replies
View Related
Aug 5, 2011
I rooted my mytouch 4g with the gingerbread rom, i installed the apk and patch for netflix and works perfectly. only problem is my wifi will not connect anymore.
View 1 Replies
View Related
Jul 5, 2013
So my phone is rooted, obviously.
When I try to setup an account so that I can access Google Play Store
I get this error:
Setup Could Not Finish Unable to open connection to server.
That is when it is on
Server [URL]...
I searched online and I saw that it should be [URL]... as the server, so I put it as that.
Now I get this error:
Setup could not finish This server requires security features your phone does not support.
I have a MyTouch 4g.
View 1 Replies
View Related
Jun 8, 2010
When I run the batch file it just hangs and does nothing.Is there a manual way to put the recovery image on the phone or is this the only method?
View 4 Replies
View Related
Mar 27, 2010
You can test to make sure everything is working by going to a command prompt, go to the tools directory of the Android SDK, and type: "adb shell". If you see a "$" (or "#" if you're already rooted) sign you're good. i can't figure that out. what is directory of the android sdk? i think i know but im now sure. i did everything on the android sdk tutorial but it seems i was just doing it on my computer and not my phone. how do i know if it went on my phone? and how do i put it on my phone if i didnt do it. am i suppose to sync it of just connect it.
View 3 Replies
View Related
Nov 23, 2010
There video upon video about how to flash them but I'm in the dark about what it is?
View 1 Replies
View Related
Apr 24, 2010
I have rooted my eris to 2.1. Then yesterday I flashed the recovery image and the flash image and put on grd lock's Vanilla Rom. If I want to put on a different Rom, do I have to flash the recovery image again?
View 3 Replies
View Related
Apr 30, 2010
I've been trying to load amonRA's recovery for my nexus one. I've managed to unlock the bootloader, and gain SU permissions. But for the life of me,I cant seem to flash the new recovery image. I've used better terminal, and it says that theres no flash image found. But I have Put it on SD Card. I've copied the text correctly and I cant get it to flash. I've also tried to downgrade the radio to get better reception, and its saying that the update isn't signed. Is there something still locked up?
View 6 Replies
View Related
May 28, 2010
I have a rooted 2.1 eris and adb is all set up. I get all the way down to the commands and the last one:
adb shell flash_image recovery /sdcard/recovery.img
says file not found. What am I doing wrong
View 2 Replies
View Related
Oct 11, 2010
I just rolled back using simple root, and before I started flashing custom roms I wanted to flash Amon RA's recovery-RA-evo-v1.8.0.img. I've tried flashing through terminal emulator, and that didn't work. I also tried flashing through adb. I have confirmed that I have root, but it's telling me that there is no image found. Does anyone have any suggestions? Thanks in advance.
View 2 Replies
View Related
May 2, 2010
Well I was having a successful first day of rooting but ran into a snag... I went from 2.1 to 2.o I Have uploaded the root .zip file and that works I have installed busybox.. but I can not get the recovery image to what could I be doing wrong?
View 1 Replies
View Related
Apr 22, 2010
I need help with putting a custom recovery image on my droid eris.
View 1 Replies
View Related
Dec 23, 2009
I used the directions to root my phone and install a recovery image from theunlockr.com how can i tell if ihave done the recovery image right before i start modding.
View 2 Replies
View Related
Jul 20, 2010
I'm trying to root my EVO, it's never been rooted before, but I'm stuck at the screen that says "Pushing recovery image." and it's been about 6 minutes now. During the rooting process, I wasn't allowed to install the HBoot drivers on my computer (I'm running windows 7, 32 bit) but I figured that maybe they were already installed on my computer because I have the android SDK installed..
View 5 Replies
View Related