General :: Activate Setting Not Showing During ActiveSync Config
Nov 25, 2013
I have a phone where Im trying to configure ActiveSync. It all goes "smoothly" because the account can be configured. The problem is when I try to view email on the configured account. It says that security policies have to be updated but I dont know where to go. I tried to remove and add the account again but I never see the "Activate" prompt where Im supposed to accept the security policies. Therefore, I don't see the Email app as a device administrator as I do on all the other users I have configured their accounts for.
View 1 Replies
Apr 21, 2010
I can't seem to connect to Exchange to sync my emails. I have gone through the manual setup process and checked all the settings are correct. I verified account information fine but then i get to the Exchange ActiveSync Settings page where i have to select the data i want to synchronise - contacts, email, calendar.
View 12 Replies
View Related
Apr 7, 2010
Was thinking about setting up activesync on the Hero. Anyone else using it? Thoughts?
View 11 Replies
View Related
Mar 9, 2010
Generally, there should be an option named Orientation which is in Setting -> Sound and Display -> Display setting -> Orientation
However, I can't not see the option "Orientation" in the Android. How could I activate this option?
View 5 Replies
View Related
Jun 12, 2013
what i want is to make that some of the rom options enable/disable/Configured as i want it by default. The idea is don't have to configure things like UI settings, and things like that every time i flash de rom. In other words, change the defaults config options of the rom. Where do I have to look?
View 2 Replies
View Related
Oct 18, 2012
I need config and autoexec sample files for dosbox turbo.
View 3 Replies
View Related
Sep 28, 2011
I needed a tun.ko module for my kernel, so I tried compiling my own kernel.
The kernel did build OK, and also boots OK, the only problem is that I cannot load any modules.
It seemes, that the module tools (insmod, modprobe etc) looks for the modules in /lib/modules, and I have them in /system/lib/modules, so my wifi does not work, as I cannot load the module.
Where I can specify the kernel module load path in the .config file?
Example:
# cd /system/lib/modules
# ls -l
-rw-r--r-- root root 315403 2008-08-01 14:00 bcm4329.ko
-rw-r--r-- root root 211573 2008-08-01 14:00 tun.ko
# modprobe bcm4329.ko
[Code] .....
View 2 Replies
View Related
May 22, 2010
I'd like to check for memory leaks in my Android app using the DDMS feature in Eclipse. When I launch an emulated device, the threads display properly for the emulated device, starting with 8600 and up.
However, when I connect my Droid to the PC, the device shows up just fine in DDMS. The logcat is generated correctly, and I can view the file structure. However, threads do not display. I get "no client selected" in the Threads pane, and there is no drop-down icon next to the device listing.
Do I need to change some particular setting in Eclipse? Is this maybe a driver issue?
View 2 Replies
View Related
Nov 25, 2010
I just got this phone and think its amazing but for some reason i don't have any 3g network anymore i had it before i updated to 2.1 is there somewhere in the settings i should look?
View 7 Replies
View Related
Jun 11, 2010
In my app I bring up a context menu on long click in a ListActivity. One of the options "Priority" pops up an AlertDialog with 3 radio button choices. The problem is, it displays an empty dialog box without my 3 choices, or the message that I set. Here is my code...
If I replace the .setSingleChoiceItems with a positive and negative button instead, it displays the buttons and the message as expected. What am I doing wrong in setting up my list of radio buttons? Here is my calling code as well...
View 1 Replies
View Related
Apr 13, 2010
I will try to explain a simple app scenario: My app goes right to a 'main view'. In this main view I have inserted a 'TextView' which displays current settings created by way of the PreferenceManager. For simplicities sake, let's say I have a checkbox in my settings. When I first start my app - the TextView on my main view shows my checkbox setting correctly (true). Now I go to the settings menu, it pops-up, and then I change it to false. I go back to the main view and...no change. It still say's true even after I changed it to false. If I end the app and then re-start it - all is well and it shows my change.
Apparently the main view just stays in the background while I'm changing settings? How can I redraw or update the main view after I change settings?
View 2 Replies
View Related
Jan 17, 2010
I recently switched from a Treo to the Moment. Generally quite pleased, but the Moxier email client doesn't seem to be displaying html links at all.
Exchange mail on the Treo still shows links, so unlike some of the other posts, the problem is not with the corporate exchange server stripping out html.
Is there a setting in Moxier to enable links within email messages?
View 2 Replies
View Related
Sep 8, 2010
I 'm using Wake Lock to stay awake my phone. I want to activate sleep mode when I will push the button "Activate" How can I activate sleep mode?
View 1 Replies
View Related
Nov 23, 2012
I'd like to use my gmail account connected via exchange activesync. I set that up with various email apps and it works nicely.
The only problem is that I don't use my gmail address as my known email address. I have an alias that points to gmail. When I email people, I want that alias to show as the email and reply to addresses.
When I have everything set up via IMAP/SMTP, I'm able to do that with K9.
Unfortunately, when connected via the Activesync way and I send mail, it always shows my gmail address to the recipient.
Is there any way/app that would allow me to do what I want? I do have my alias set up as a send mail as option in the gmail web interface.
View 1 Replies
View Related
Dec 12, 2012
At work we use many different kinds of phones. blackberries, android, iphones.
The blackberries have their own setup. iphones and androids use activesync. Everything ran nicely.
We recently switched activesync from port 80 to 85. We are having issues with some android devices.
The gingerbread ones are fine... just adding the port & colon ':85' at the end of the server address.
( servername.com:85 )
But anything with ICS or above... is soon as you add the colon the 'next' button greys out... like it's an invalid character.
View 2 Replies
View Related
Oct 2, 2013
I am trying to handle the config changes correctly when a service is running. So I thought I had achieved this as when testing this on my cheap LG E400 model (small screen) and turn the phone during the dialog (spinner style) showing, I have set up a onsavedinstancestate and in the onCreate look to see if this is !=null and then get the bundle variables to check where the app is with the service.
On the phone this all appears to work fine but when using my galaxy tab2 7.0 , the app actually does not crash during the screen rotation but the dialog box just stays on screen and nothing changes.
when I then look in logcat I have found that it reports a leak :
[HIGH]10-02 13:34:13.213: E/WindowManager(850): Activity co.uk.XXXXX.XXXX.Exportfile has leaked window com.android.internal.policy.impl.PhoneWindow$Decor View{4236a780 V.E..... R....... 0,0-580,163} that was originally added here
10-02 13:34:13.213: E/WindowManager(850): android.view.WindowLeaked: Activity co.uk.XXXXXX.XXXXXXXX.Exportfile has leaked window com.android.internal.policy.impl.PhoneWindow$Decor View{4236a780 V.E..... R....... 0,0-580,163} that was originally added here
[code]...
View 5 Replies
View Related
Mar 19, 2012
I've been debating configuring my personal phone to access my employer's Exchange server; I would be checking it on occasion-- more of a convenience thing to know what's up before I head in for the day.
Using the default Android Mail client and choosing ActiveSync and doing the setup, I inevitably reach a screen with the following:
Quote:
Activate security policies?
Exchange security policies
Your IT administrator requires that you activate these security policies in order to sync with your Exchange Server.
Activating this administrator will allow the application Mail to perform the following operations:
! Erase all data
Perform a factory reset, which deletes all of your data without any confirmation.
! Set password rules
Restrict the types of passwords that you are allowed to use.
! Monitor screen-unlock attempts
Monitor failed attempts to log into your device.
! Lock the screen
Control when your device locks, requiring that you re-enter your password.
! Device function limitation
Restrict some function on device like Wifi, Bluetooth, Camera etc.
Needless to say, this is highly unappealing for my personal phone-- way too much power for the Mail application. So my questions-- what are my options?
-would a different Exchange connectivity application like Touchdown request those same permissions for access?
-would I be better off setting up ActiveSync on an alternate ROM and booting into that when I want to check work mail (not as frequently as some other users)?
-How far does that remote wipe control extend? Could they wipe the entire phone, including bootloader? Or is it just reference to internal storage? Could they wipe the external SD card?
-is there a way to revoke those permissions from the Mail application while retaining the ability to connect to the Exchange server?
View 2 Replies
View Related
Aug 11, 2013
I am having an issue with my HTC Evo 3D where I am unable to have more than one active Exchange Activesync (EAS) account syncing. I'm trying to have my work e-mail and my hotmail account with push using EAS. What I have tried:
- Setting up my work e-mail, then my hotmail. Can receive work e-mails instantly, but not with hotmail.
- Setting up my hotmail, then my work e-mail. Can receive hotmail e-mails instantly, but not with my work e-mail.
- Setting up my work e-mail in one mail client, and my hotmail in a separate client. Same issues as above, one receiving push e-mail and the other not.
If I set up one and then the other in the default HTC mail client, the first one will work with push the but second one won't. BUT, if I then do a manual sync to make the second one "catch up", that second one will start receiving with push but the first one no longer does. I can keep doing this, and it seems like only one can be "active" at a time.
I've tried different clients with the same results, and tried Touchdown which many people recommend, but Touchdown is built to allow only one active profile at a time (so only one EAS account pushing or polling).
I'm beginning to think it's a device limitation on the Evo 3D but it would be great to get around that - I've seen bits and pieces around saying that, due to licencing, iPhones can have up to 5 EAS accounts at a time, and different Android phones can have varying numbers, but haven't seen anything particularly clear or definitive.
View 2 Replies
View Related
Jan 17, 2013
We just implemented Exchange 2010 at our company within the past year, and up until now, we weren't enforcing a security key for devices with Exchange accounts attached to them. Our systems team is currently implementing some security features including the required security key and a remote-wipe tool.
I tested the remote wipe tool on my Asus Transformer, which is running a custom Jellybean ROM and Rogue Recovery, and the wipe actually worked. I was a little surprised to see it work, I figured the custom recovery would cause it to fail.
Is there anyway to screw over the remote-wipe tool?
View 2 Replies
View Related
Jul 5, 2012
Interesting problem that I seem to have had out of the box (and which has started when I traded my old treo in for this android device): emails regularly disappear both from my Note, the exchange server and thus everywhere else as well, without any intervention on my part. My Note notifies me of new email, I glance at the overview, and sometimes no more than a few minutes later, that new email is completely gone.
Another interesting feature that popped up during testing is that emails sent from the device to this very account do appear in the sent items list both on the device and on the exchange server, but *only* at the inbox on the android device. And as with some of the regular incoming emails, these too disappear. As external emails (i.e. sent from for example gmail) thus far seem to stick, I am suspecting an issue with either activesync itself or exchange and activesync, but I can't be sure.
Noticed a few other threads both here and elsewhere about disappearing emails, but most (if not all) of these seem to be about POP3 where part of the default routine is of course deleting from the server. apps at issue:
- Android 2.3.6 and 4.0 (problem stayed after the upgrade)
- Default mail client on both versions (this particular exchange account has thus far proven a bit troublesome to configure with for example k-9 and touchdown)
- Exchange Server 2007 server / activesync
View 2 Replies
View Related
Feb 20, 2013
I have CM10.1 (I'm using the nightlies) and I'm using the stock email app which I love. However it's missing one feature that I'm hoping another app (whether that's a replacement email app or something that works with the stock email app) might have.
I'd like to "pause" direct-push email functionality during a certain time frame. Essentially I'm tired of seeing emails during my off-hours and I'd like to stop it from syncing automatically during those hours. Just suppress the notification during those hours (it can sync all it wants as long as I don't see it).
Is this a possibility with the stock app?
View 1 Replies
View Related
Sep 22, 2010
Awaiting my replacement for my Desire after first one returned due to faulty speaker. Hope to get my replacement in next 2 days.Meanwhile, as I use Microsoft Outlook 2007 on my PC to access my emails from my domain mail account (POP3) most of the time, I was previously unsure how best to configure/sync my emails on my Desire. From other recommendations on this forum, I reached the conclusion it was best to configure my GMail account to also pull in mail from my domain POP3 account, and then just check my mail via GMail on the Desire. However, when I get my new phone, I am now wondering what is the BEST way to actually configure GMail on the HTC Desire?
On the wizard that appears when you first start up the phone, it asks you to enter your email account settings. I could enter the settings for my GMail account there, and I assume it would then check/use my Gmail account via the Desire's own main email app.Is it better for any reason to just bypass the settings for the Desire's main mail app, and instead just configure and access my GMail via the Desire's own GMAil app? AND if choose the latter option, will the phone's email notification system still automatically alert me to new emails, or do I need to reconfigure something to make it do that?AND Will the phone's standard email/messages shortcut option automatically link to the GMail app, and if not, is there a way to force it to link to that?I'd appreciate recommendations for best way to proceed with this as it may save me setting it up one way and then deciding after some time that I'm better using a different method!
View 1 Replies
View Related
Apr 21, 2010
I need to save these configurations into a file, and in my app I could change these configurations. In other words, I need a file to take all my config data, and in my app, I could read/write this file as I want.
I've searched document and mailing list archive, and have not found the exact solution. 1. SharedPreferences could not solve : It could only do with simple key/value pairs, my configuration data is more complex . 2. file in /assets , /res/raw could not solve: It seems that the file in these position would be read only
I've found a way, it almost solved my problem, but still not. Our code could deal with the file in /data/data/package-name/files on the target file system, this is good to me, but how could I put my file in this directory after my app has been installed? My app need to read these configurations when it starts.
My question is how could I pack my data file into my apk package, and then my app could read/write this file when it is run.
View 3 Replies
View Related
Mar 18, 2009
I have a G1 phone and use it in mainland China. But I can't config it to work with browser and MMS at the same time. However with different APN, the browser and MMS can work seperately. For browser, I use following APN config code...
For MMS, I use following APN config code...
When above two APNs both exists, only browser can work. MMS doesn't work any more.
Does any google export know that how to config G1 to make both browser and MMS work? If it's a known issue, is there any roadmap to fix it?
View 17 Replies
View Related
Jun 11, 2013
I just want to know if and how I can activate 2 accounts on WhatsApp on the same phone, I am using Samsung Galaxy S Duos GT-S7562.
View 1 Replies
View Related
Jun 5, 2013
I have a droid razr that was flashed to work on page plus and then flashed back to factory specs. I cant get it to activate on verizon.
View 1 Replies
View Related
Apr 30, 2010
I have to access to the data folder of other applications from my application to read configuration's file and so on but it seems it's possible only to read data from the sdcard and my application's data folder. Can you suggest me how to solve this problem?
View 4 Replies
View Related
Mar 28, 2010
Looking in the android sdk folders, I've found a file called values/config.xml. This seems to be somewhere that you can define values for later use in layouts and animations.
Given the config.xml:
<resources>
<string name="config_somePadding">50dip</string>
</resources>
How would I reference this to use as the layout_height in a layout xml file?
@string/config_somePadding is actually the only one I've found that doesn't throw an error in Eclipse (even though there isn't a config_somePadding in values/strings.xml), but it appears to just put an empty string.
In the sdk, they use an integer for animation duration. They reference it like this: android:duration="@android:integer/config_longAnimTime". Is there a way to use values that aren't integers in the layout_height attribute?
View 1 Replies
View Related
Jun 4, 2013
I let Google Now set itself up on my S3 about 2-3 months ago. I thought it was kinda cool but I didn't feel like messing with it too much at the time. I did, however, see the "Search, or say Google" feature. I spoke the word "Google" and sure enough it activated, and I spoke the generic, "Where is the nearest restaurant?" just to see how it worked, and several restaurants were shown. Pretty cool, but like I said, I wasn't in the mood to dig into it much deeper at that time.
Fast forward to last night. I had some time on my hands and thought I would mess with this "Google Now" thing I've been reading about more and more. I add the Google Now widget to one of my pages easily enough. Then I tap it to get it started, and I see the familiar, "Search, or say Google" and I'm ready to play. "Google", I say. Nothing. I repeat it... "Google". Still nothing. I tap the microphone, and the screen changes to the Google logo in the upper left, a flashing red microphone in the upper right, and the words "Speak now" show up in the middle of the screen. Again, I do the "Where is the nearest restaurant?", just like I did before, and I wait for its response. The text from my question shows up on screen, but the mic in the upper right is still pulsing. I wait for about 30 seconds and finally tap the mic icon, thinking that will activate the question. No... it just goes back to the previous screen. I try this several times with different questions, each getting a bit more prophanity-laced as I'm losing patience. Finally I give up.
Then I see if my wife has Google Now activated on her Note 2. She doesn't, so I grab the widget and throw it on an empty screen. I tap the widget and Google Now starts. I see the "Search, or say Google", so I sternly say, "Google". It activates, I ask for the nearest restaurants, and it shows me several in the area. Why won't it work on my S3 anymore? I check the settings for voice and see Hotword detection is checked. I compare my settings to the settings on my wife's Note 2 and they're identical.
View 10 Replies
View Related
Mar 27, 2013
How to activate Swype on the LG Spectrum 2 specifically? I had it on my LG Vortex and my wife has it on her Galaxy Tab 2.
View 1 Replies
View Related
