Has anyone been able to down load the android source code by following the recommended steps as noted on the android web page?If so, how was that done, as the remote end is consistently terminating the connection.
View 2 Replies
i just did a nand restore and tried to run titanium backup but it keeps getting hung up, this time its been stuck at 42% for several minutes. should i just end process and try again?
i just stopped it at 42%...everything seems to have been restored from the nandroid restore. so i guess titanium is just to be used when your loading a custom rom and not a rom you have backed up?
so i was on the phone talking to someone and when i hung up my droid died but i didn't think anything of it because my battery was dead anyways. however i put it on the charger and tried to boot it up it wont pass the screen with the three little green guys. whats going on? i already tried a hard reset aswell
View 2 Replies View RelatedInstalled thru ROM manager, looks like it went thru backed up and installed ok, but now I am hung up on the screen that shows the Sapphire instead of the Droid eye.
View 4 Replies View Relatedwhy after ive made a call to someone and hung up, my phone will dial another of my contacts, this happeneds quite a lot and sometimes I dont notice it has happened, not good at 3am when im calling someone who has work in the morning.
View 3 Replies View RelatedI had an app, can't remember which it was, that would automatically go to my home screen after I hung up the phone. Any ideas?
View 1 Replies View RelatedI got 2 Mega from ebay. They were working fine. I updated one of them and then it got stuck on Samsung GALAXY MEGA logo and stay there for more than a day.
View 2 Replies View Relatedadded a quick demo video of our upcoming Android Infrared (IR) Remote.Initially it will support a full IR dbase of 300,000+ IR codes, IR learner for any code not in the dbase, Pre-Built GUI so it is simple to setup. Will add rs232, relays, and other tcp options also after initial release.
View 5 Replies View RelatedLooking for an App to remote to my desktop.I am trying to see if I can access magicjack on my desktop and make true voip calls.
View 2 Replies View Relatedwe modifid snake from sdk samples. there is a running exception "stopped unexpectedly". after step debug, i found that the statement setContentView(R.layout.snake_layout); and mSnakeView.setTextView ((TextView) findViewById(R.id.text));from snake.java file will throw exceptions. i think the layout xml file have a some error. but i can't find any error in this file.
View 6 Replies View RelatedAnyone else getting this error when phone rotates from portrait to landscape? Driving me nuts. "The Process android.process.acore has stopped unexpectedly. Just started after installing cyanogen 6.0 and Snap 7.6 Kernel.
View 1 Replies View RelatedI have built a game. When the user clicks a button on the main page, he is redirected to another activity for a predefined time(say 20 s) and then he returns to the main page where he can choose another button. Now, this works perfectly on the emulator but on the phone when I clicks another button on the main page, it says the application has stopped unexpectedly. Force close. However, if I wait for say 3 s before clicking another button, it works. Is it because the images on the background of the buttons are too heavy?
View 1 Replies View RelatedI keep getting the error message "com.android.settings has stopped unexpectedly" when I try to access the settings to my apps. I have tried uninstalling app, rebottings and running antivirus, but nothing still.anyone have any tips? I have a HTC Hero.
View 7 Replies View RelatedMy wife and I both got Droids yesterday. We were googling apps for the Android and Handcent had great reviews. My wife was able to install hers properly and it added her contacts. Mine did not, when I go to add a contact from a group (i.e. all contacts), I get:''The applications Handcent Sms (process com.handcent.nextsms) has stopped unexpectedly. Please try again.".So for example, when my wife texted me it just came up with her phone number not her name. That is fine for her because I know her cell # but not for all my friends.
View 3 Replies View RelatedI've run this on a device and on the emulator. The app stops unexpectedly on both. I have not a clue what is wrong currently. It uses Google API Maps I compiled with Google Api 7. I followed this tutorial:
http://developer.android.com/guide/tutorials/views/hello-mapview.html
I did use the correct API Key That the final apk is signed with. This is the source(If you compile it shouldn't work as it is unsigned). This is the compiled signed apk
Log
03-21 00:30:38.912: INFO/ActivityManager(54): Starting activity: Intent { act=android.intent.action.MAIN flg=0x10000000 cmp=com.chris.stryker.worldly/.com.poppoob.WorldlyMap }
03-21 00:30:39.173: INFO/ActivityManager(54): Start proc com.chris.stryker.worldly for activity com.chris.stryker.worldly/.com.poppoob.WorldlyMap: pid=287 uid=10031 gids={3003, 1015}
03-21 00:30:39.532: DEBUG/ddm-heap(287): Got feature list request
03-21 00:30:40.185: WARN/dalvikvm(287): Unable to resolve superclass of Lcom/chris/stryker/worldly/com/poppoob/WorldlyMap; (17)
03-21 00:30:40.193: WARN/dalvikvm(287): Link of class 'Lcom/chris/stryker/worldly/com/poppoob/WorldlyMap;' failed
03-21 00:30:40.205: DEBUG/AndroidRuntime(287): Shutting down VM
03-21 00:30:40.223: WARN/dalvikvm(287): threadid=3: thread exiting with uncaught exception (group=0x4001b188)
03-21 00:30:40.223: ERROR/AndroidRuntime(287): Uncaught handler: thread main exiting due to uncaught exception
03-21 00:30:40.252: ERROR/AndroidRuntime(287): java.lang.RuntimeException: Unable to instantiate activity ComponentInfo{com.chris.stryker.worldly/com.chris.stryker.worldly.com.poppoob.WorldlyMap}: java.lang.ClassNotFoundException: com.chris.stryker.worldly.com.poppoob.WorldlyMap in loader dalvik.system.PathClassLoader@45a13938
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2417)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread.access$2200(ActivityThread.java:119)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.os.Handler.dispatchMessage(Handler.java:99)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.os.Looper.loop(Looper.java:123)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread.main(ActivityThread.java:4363)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at java.lang.reflect.Method.invokeNative(Native Method)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at java.lang.reflect.Method.invoke(Method.java:521)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at dalvik.system.NativeStart.main(Native Method)
03-21 00:30:40.252: ERROR/AndroidRuntime(287): Caused by: java.lang.ClassNotFoundException: com.chris.stryker.worldly.com.poppoob.WorldlyMap in loader dalvik.system.PathClassLoader@45a13938
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at dalvik.system.PathClassLoader.findClass(PathClassLoader.java:243)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at java.lang.ClassLoader.loadClass(ClassLoader.java:573)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at java.lang.ClassLoader.loadClass(ClassLoader.java:532)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.Instrumentation.newActivity(Instrumentation.java:1021)
03-21 00:30:40.252: ERROR/AndroidRuntime(287):
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2409)
03-21 00:30:40.252: ERROR/AndroidRuntime(287): ... 11 more
03-21 00:30:40.300: INFO/Process(54): Sending signal. PID: 287 SIG: 3
03-21 00:30:40.312: INFO/dalvikvm(287): threadid=7: reacting to signal 3
03-21 00:30:40.396: INFO/dalvikvm(287): Wrote stack trace to '/data/anr/traces.txt'
03-21 00:30:49.002: WARN/ActivityManager(54): Launch timeout has expired, giving up wake lock!
03-21 00:30:49.685: WARN/ActivityManager(54): Activity idle timeout for HistoryRecord{458ab6d0 com.chris.stryker.worldly/.com.poppoob.WorldlyMap}
For some reason I can't explain, when my app runs, I will on occasion get the following error message: "The application xxxxxxxx (process xxxxxx) has stopped unexpectedly. Please try again". When I debug my code, it seems to break at random places that doesn't make sense. On top of that I tried to surround the entire code with a try/catch block just to try to catch the exception, but it doesn't work either. I'm suspecting it's the OS that is producing this error message but I don't know why. As far as my code goes, if there were exceptions caused by it, it would've been caught by the try/catch block. Can someone shed some light here?
View 13 Replies View RelatedI have the EVO and I recently added a new Facebook contact. When I go into people>online directories>facebook he shows up in my friends list (which is great that it synched up). When I select the contact, his details pop up fine (again great). However, when I select the refresh icon at the bottom (which is supposed to pull up his wall) I get the error message "The application Facebook for HTC Sense (process com.htc.socialnetwork.facebook) has stopped unexpectedly. Please try again." The only option I have is to select "force close" in the error window. This seems to be the only contact this is happening with, so I'm not sure what the problem is. I have tried logging out and back into Facebook for HTC Sense, but that has not solved the issue.
View 1 Replies View RelatedThe code seems no problem when I run it, but it stop unexpectedly in the emulator. I read some answer in the forum, It has to look at the logcat to see about the exception handler. But I do not really understand the logcat output. Please, developers, help me!. Below are the coding and my logcat output.
package com.example.testing; import android.app.Activity; import android.media.MediaPlayer; import android.os.Bundle; import android.util.Log; import android.widget.TextView; import android.widget.Toast; import com.example.testing.R;
public class testing extends Activity {
private static final String TAG = "MediaPlayerDemo";
private MediaPlayer mMediaPlayer;
private static final String MEDIA = "media";
private static final int LOCAL_AUDIO = 1;
private static final int STREAM_AUDIO = 2;
private static final int RESOURCES_AUDIO = 3;
private static final int LOCAL_VIDEO = 4;
private static final int STREAM_VIDEO = 5;
private String path;
private TextView tx;
@Override public void onCreate(Bundle icicle) {super.onCreate(icicle);
tx = new TextView(this);setContentView(tx);Bundle extras = getIntent().getExtras()
playAudio(extras.getInt(MEDIA));}
private void playAudio(Integer media)
{try {switch (media){case LOCAL_AUDIO:/**
* TODO: Set the path variable to a local audio file path.*/path = "/res/raw/test1";
if (path == "") {// Tell the user to provide an audio file URL.Toast.makeText(testing.this
"Please edit MediaPlayer_Audio Activity, "
+ "and set the path variable to your audio file path."
+ " Your audio file must be stored on sdcard.",Toast.LENGTH_LONG).show(); }
mMediaPlayer = new MediaPlayer();
mMediaPlayer.setDataSource(path);
mMediaPlayer.prepare();
mMediaPlayer.start();
break;case RESOURCES_AUDIO:/**
* TODO: Upload a audio file to res/raw folder and provide
* its resid in MediaPlayer.create() method.*/
mMediaPlayer = MediaPlayer.create(this, R.raw.test1);
mMediaPlayer.start();}
tx.setText("Playing audio...");}
catch (Exception e) {Log.e(TAG, "error: " + e.getMessage(), e);}}
@Override protected void onDestroy() {super.onDestroy();
// TODO Auto-generated method stub if (mMediaPlayer != null) { mMediaPlayer.release();mMediaPlayer = null;}}}
LOGCAT OUTPUT 11-08 06:40:03.647: INFO/DEBUG(539): debuggerd: Jun 30 2009 17:00:51 11-08 06:40:03.659: INFO/vold(538): Android Volume Daemon version 2.0 11-08 06:40:03.678: ERROR/vold(538): Error opening switch name path '/ sys/class/switch/test2' (No such file or directory) 11-08 06:40:03.678: ERROR/vold(538): Error bootstrapping switch '/sys/ class/switch/test2' (m) 11-08 06:40:03.678: ERROR/vold(538): Error opening switch name path '/ sys/class/switch/test' (No such file or directory) 11-08 06:40:03.678: ERROR/vold(538): Error bootstrapping switch '/sys/ class/switch/test' (m) 11-08 06:40:03.678: DEBUG/vold(538): Bootstrapping complete 11-08 06:40:03.817: ERROR/flash_image(544): can't find recovery partition 11-08 06:40:03.918: DEBUG/qemud(546): entering main loop 11-08 06:40:04.588: DEBUG/AndroidRuntime(541): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< 11-08 06:40:04.588: DEBUG/AndroidRuntime(541): CheckJNI is ON 11-08 06:40:04.828: DEBUG/qemud(546): fdhandler_accept_event: accepting on fd 10 11-08 06:40:04.828: DEBUG/qemud(546): created client 0xe078 listening on fd 8 11-08 06:40:04.828: DEBUG/qemud(546): fdhandler_event: disconnect on fd 8 11-08 06:40:04.877: DEBUG/qemud(546): fdhandler_accept_event: accepting on fd 10 11-08 06:40:04.877: DEBUG/qemud(546): created client 0xf028 listening on fd 8 11-08 06:40:04.877: DEBUG/qemud(546): client_fd_receive: attempting registration for service 'gsm' 11-08 06:40:04.877: DEBUG/qemud(546): client_fd_receive: -> received channel id 1 11-08 06:40:04.887: DEBUG/qemud(546): client_registration: registration succeeded for client 1 11-08 06:40:05.108: INFO/(542): ServiceManager: 0xac38 11-08 06:40:05.127: INFO/AudioFlinger(542): AudioFlinger's thread ready to run for output 0 11-08 06:40:05.147: INFO/CameraService(542): CameraService started: pid=542 11-08 06:40:05.207: DEBUG/AndroidRuntime(541): --- registering native functions --- 11-08 06:40:05.528: INFO/Zygote(541): Preloading classes... 11-08 06:40:05.538: DEBUG/dalvikvm(541): GC freed 764 objects / 42216 bytes in 10ms 11-08 06:40:05.717: DEBUG/dalvikvm(541): GC freed 278 objects / 17160 bytes in 4ms 11-08 06:40:05.897: DEBUG/dalvikvm(541): GC freed 208 objects / 12696 bytes in 5ms 11-08 06:40:05.967: DEBUG/dalvikvm(541): Trying to load lib /system/ lib/libmedia_jni.so 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Added shared lib /system/lib/ libmedia_jni.so 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Trying to load lib /system/ lib/libmedia_jni.so 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Shared lib '/system/lib/ libmedia_jni.so' already loaded in same CL 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Trying to load lib /system/ lib/libmedia_jni.so 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Shared lib '/system/lib/ libmedia_jni.so' already loaded in same CL 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Trying to load lib /system/ lib/libmedia_jni.so 0x0 11-08 06:40:06.107: DEBUG/dalvikvm(541): Shared lib '/system/lib/ libmedia_jni.so' already loaded in same CL 0x0 11-08 06:40:06.119: DEBUG/dalvikvm(541): GC freed 462 objects / 29144 bytes in 6ms 11-08 06:40:06.527: DEBUG/dalvikvm(541): GC freed 3584 objects / 171648 bytes in 17ms 11-08 06:40:07.699: DEBUG/dalvikvm(541): GC freed 11329 objects / 400856 bytes in 27ms 11-08 06:40:08.007: DEBUG/dalvikvm(541): GC freed 10472 objects / 438272 bytes in 28ms 11-08 06:40:08.327: DEBUG/dalvikvm(541): GC freed 10975 objects / 459800 bytes in 33ms 11-08 06:40:09.327: DEBUG/dalvikvm(541): GC freed 14372 objects / 506896 bytes in 36ms 11-08 06:40:09.658: DEBUG/dalvikvm(541): GC freed 11314 objects / 481360 bytes in 36ms 11-08 06:40:09.847: DEBUG/dalvikvm(541): GC freed 5928 objects / 248640 bytes in 30ms 11-08 06:40:10.027: DEBUG/dalvikvm(541): GC freed 349 objects / 37032 bytes in 24ms 11-08 06:40:10.228: DEBUG/dalvikvm(541): GC freed 778 objects / 48376 bytes in 33ms 11-08 06:40:10.327: DEBUG/dalvikvm(541): GC freed 321 objects / 37288 bytes in 34ms 11-08 06:40:10.757: DEBUG/dalvikvm(541): GC freed 477 objects / 29584 bytes in 34ms 11-08 06:40:10.788: DEBUG/dalvikvm(541): Trying to load lib /system/ lib/libwebcore.so 0x0 11-08 06:40:10.869: DEBUG/dalvikvm(541): Added shared lib /system/lib/ libwebcore.so 0x0 11-08 06:40:11.048: DEBUG/dalvikvm(541): GC freed 441 objects / 26224 bytes in 35ms 11-08 06:40:11.147: DEBUG/dalvikvm(541): GC freed 506 objects / 41464 bytes in 33ms 11-08 06:40:11.248: DEBUG/dalvikvm(541): GC freed 537 objects / 38832 bytes in 38ms 11-08 06:40:11.368: DEBUG/dalvikvm(541): GC freed 342 objects / 22552 bytes in 35ms 11-08 06:40:11.457: DEBUG/dalvikvm(541): GC freed 338 objects / 18736 bytes in 38ms 11-08 06:40:11.567: DEBUG/dalvikvm(541): GC freed 629 objects / 32136 bytes in 36ms 11-08 06:40:12.518: DEBUG/dalvikvm(541): GC freed 14257 objects / 497280 bytes in 57ms 11-08 06:40:12.868: DEBUG/dalvikvm(541): GC freed 11164 objects / 469576 bytes in 53ms 11-08 06:40:13.188: DEBUG/dalvikvm(541): GC freed 7134 objects / 311424 bytes in 55ms 11-08 06:40:13.357: DEBUG/dalvikvm(541): GC freed 752 objects / 43224 bytes in 41ms 11-08 06:40:13.449: DEBUG/dalvikvm(541): GC freed 598 objects / 31496 bytes in 43ms 11-08 06:40:13.558: DEBUG/dalvikvm(541): GC freed 413 objects / 26336 bytes in 43ms 11-08 06:40:13.597: INFO/Zygote(541): ...preloaded 1166 classes in 8066ms. 11-08 06:40:13.648: DEBUG/dalvikvm(541): GC freed 313 objects / 19952 bytes in 46ms 11-08 06:40:13.648: INFO/Zygote(541): Preloading resources... 11-08 06:40:13.707: DEBUG/dalvikvm(541): GC freed 54 objects / 11248 bytes in 43ms 11-08 06:40:14.118: DEBUG/dalvikvm(541): GC freed 337 objects / 15008 bytes in 46ms 11-08 06:40:14.338: DEBUG/dalvikvm(541): GC freed 280 objects / 11768 bytes in 44ms 11-08 06:40:14.368: INFO/Zygote(541): ...preloaded 48 resources in 712ms. 11-08 06:40:14.397: INFO/Zygote(541): ...preloaded 15 resources in 23ms. 11-08 06:40:14.448: DEBUG/dalvikvm(541): GC freed 117 objects / 8448 bytes in 50ms 11-08 06:40:14.498: DEBUG/dalvikvm(541): GC freed 205 objects / 8104 bytes in 45ms 11-08 06:40:14.557: DEBUG/dalvikvm(541): GC freed 36 objects / 1400 bytes in 53ms 11-08 06:40:14.567: INFO/dalvikvm(541): Splitting out new zygote heap 11-08 06:40:14.588: INFO/dalvikvm(541): System server process 569 has been created 11-08 06:40:14.597: INFO/Zygote(541): Accepting command socket connections 11-08 06:40:14.651: INFO/jdwp(569): received file descriptor 10 from ADB 11-08 06:40:14.727: WARN/System.err(569): Can't dispatch DDM chunk 4d505251: no handler...
read more»
I recently experienced the cyclic - and somewhat random: "Android.process.acore has stopped unexpectedly" problem and googling it mostly came up with nothing and in a few cases "fixed it by wiping the phone". I found that unsatisfactory, so I decided to dig deeper. To me it was pretty clear that this was sync related - turning off Contacts sync stopped it from happening. Turning it back on will trigger the problem within a few seconds. So it would seem that something in my G1 Contact database will not transfer to Gmail's Contact database. Sadly I could not find any useful trace, but at least I knew roughly when it had happened.
By comparing what I could see in the database and what actually was visible in the Contact Editor I tracked it down to that I had some Contact Postal Addresses that had a TYPE with a value > 3. In the editor these will still show up as "HOME" ("Other" would have been more appropriate IMHO). If I fiddle this to some other value and save the contact again the problem disappears. In my opinion it would make sense for the acore sync process to handle incorrect values by replacing them with HOME/OTHER instead of crashing. I have not dug into the source, but I would think it would be a trivial fix. I suspect there might be several similar cases where a default fallback would make more sense than to crash the sync. In retrospect I also know how this happened to me: I optimistically used the Phone label to produce a Postal Address label - it never occurred to me that they could be different.
Hello has anybody else had this happen to them it has happened to me twice now. And think I know hoe it happens be both times it has happened it has been connected to my pc when I power it off and then back on Please help
View 11 Replies View RelatedBrand new Samsung Galaxy S which I received in the post this morning. Every time I try to send a text, when I try to select the contact I wish to send the message to, the error message 'the process android.process.acore has stopped unexpectedly. Please try again' comes up. I called up Samsung and the woman who I spoke to was useless so please help me!
View 1 Replies View RelatedI am trying to display the image on the ImageView object. But the setImageResource fails to display the image. Here is my XML file looks like:
<?xml version=*"1.0"* encoding=*"utf-8"*?>
<LinearLayout xmlns:android=*"http://schemas.android.com/apk/res/android" *
android:orientation=*"vertical" *
android:layout_width=*"fill_parent" *
android:layout_height=*"fill_parent"*>
<FrameLayout
android:orientation=*"vertical" *
android:layout_width=*"fill_parent" *
android:layout_height=*"fill_parent" *
android:layout_weight=*"1"*>
<ImageView
id=*"@+id/batteryLevelview"*
android:layout_width=*"wrap_content"*
android:layout_height=*"wrap_content"*
android:layout_gravity=*"center"*/>
</FrameLayout>
</LinearLayout>
Here is my code:
@Override
*public* *void* onCreate(Bundle savedInstanceState) {
*super*.onCreate(savedInstanceState);
setContentView(R.layout.*main*);
ImageView batteryLevelImage = (ImageView) findViewById(R.id.* batteryLevelview*);
batteryLevelImage.setImageResource(R.drawable.*notconnected*);
}
I am a brand new developer to Android. I wrote a pretty simple application that uses the gesture library. The application itself seems to run fine in the simulator. However, when I installed the application on my Google Dev Phone 1 (G1) last night, it doesn't seem to work. I've upgraded my G1 with the 1.6 image from the htc developer site. I see the first screen/activity for about a second and the application exits without and errors. Here is what my manifest looks like:
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="com.blahblah" android:debuggable="true"
android:versionCode="1"
android:versionName="1.0">
<uses-sdk android:minSdkVersion="4" />
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
<uses-permission android:name="android.permission.READ_CONTACTS">
</ uses-permission>
<uses-permission android:name="android.permission.CALL_PHONE">
</uses- permission>
<application android:icon="@drawable/icon" android:label="@string/ application_name"> <activity android:name="Gesture1Activity"
android:label="@string/application_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity android:name="Gesture2Activity"
android:label="@string/label_gesture_list" />
<activity android:name="Gesture3Activity"
android:label="@string/label_create_gesture" />
</application>
</manifest>
Here's the output for logcat:
D/AndroidRuntime(860): D/AndroidRuntime(860): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< D/AndroidRuntime(860): CheckJNI is OFF D/AndroidRuntime(860): --- registering native functions --- I/jdwp (860): received file descriptor 20 from ADB D/ddm-heap(860): Got feature list request I/ActivityManager(101): Starting activity: Intent { flg=0x10000000 cmp=com.blahblah/.Gesture1Activity } D/AndroidRuntime(860): Shutting down VM D/dalvikvm(860): DestroyJavaVM waiting for non-daemon threads to exit E/AndroidRuntime(860): ERROR: thread attach failed D/dalvikvm(860): DestroyJavaVM shutting VM down D/dalvikvm(860): HeapWorker thread shutting down D/dalvikvm(860): HeapWorker thread has shut down D/jdwp (860): JDWP shutting down net... D/jdwp (860): +++ peer disconnected I/dalvikvm(860): Debugger has detached; object registry had 1 entries D/dalvikvm(860): VM cleaning up D/dalvikvm(860): LinearAlloc 0x0 used 677572 of 4194304 (16%) W/InputManagerService(101): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub $Proxy@439a9eb8
I have an MapView app downloaded from Internet, when I tested it on the simulator, everything is fine, but when I installed it on my phone, the app stopped unexpectedly. Here is the code
public class CurrentLocationWithMap extends MapActivity {
MapView map;
MapController ctrlMap;
Button inBtn;
Button outBtn;
ToggleButton switchMap;
@Override protected boolean isRouteDisplayed() { return false;
} @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState);
setContentView(R.layout.main);
map = (MapView)findViewById(R.id.myMapView);
List<Overlay> overlays = map.getOverlays();
MyLocationOverlay myLocation = new MyLocationOverlay(this,map);
myLocation.enableMyLocation();
overlays.add(myLocation);
ctrlMap = map.getController();
inBtn = (Button)findViewById(R.id.in);
outBtn = (Button)findViewById(R.id.out);
switchMap = (ToggleButton)findViewById(R.id.switchMap);
OnClickListener listener = new OnClickListener() {
@Override public void onClick(View v) { switch (v.getId()) { case R.id.in: ctrlMap.zoomIn();
break; case R.id.out: ctrlMap.zoomOut();
break; default: break; } } };
inBtn.setOnClickListener(listener);
outBtn.setOnClickListener(listener);
//switchMap.setOnCheckedChangeListener(new OnCheckedChangeListener() {
@Override public void onCheckedChanged(CompoundButton cBtn, boolean isChecked) {
if (isChecked == true) { map.setSatellite(true);
} else { map.setSatellite(false); } } });
LocationManager locationManager;
String context = Context.LOCATION_SERVICE;
locationManager = (LocationManager)getSystemService(context);
//String provider = LocationManager.GPS_PROVIDER;
Criteria criteria = new Criteria();
criteria.setAccuracy(Criteria.ACCURACY_FINE);
criteria.setAltitudeRequired(false);
criteria.setBearingRequired(false);
criteria.setCostAllowed(true);
criteria.setPowerRequirement(Criteria.POWER_LOW);
String provider = locationManager.getBestProvider(criteria, true);
Location location = locationManager.getLastKnownLocation(provider);
updateWithNewLocation(location);
locationManager.requestLocationUpdates(provider, 2000, 10, locationListener);
} private final LocationListener locationListener = new LocationListener() {
public void onLocationChanged(Location location) { updateWithNewLocation(location);
} public void onProviderDisabled(String provider){ updateWithNewLocation(null);
} public void onProviderEnabled(String provider){ } public void onStatusChanged(String provider, int status, Bundle extras){ } };
private void updateWithNewLocation(Location location) { String latLongString;
TextView myLocationText;
myLocationText = (TextView)findViewById(R.id.myLocationText);
if (location != null) { double lat = location.getLatitude();
double lng = location.getLongitude();
latLongString = "Latitude:" + lat + " Longtitude:" + lng;
ctrlMap.animateTo(new GeoPoint((int)(lat*1E6),(int) (lng*1E6)));
} else { latLongString = "Position not found";
} myLocationText.setText("Current location: " + latLongString);
} }
Looks like I've run into some breakage from 1.5 to 1.6 after all. I am registering location listeners with LocationManager.requestLocationUpdates() With GPS as location provider, I run into a problem with navigation stopping by itself after a few seconds, just to return, stop again, in an endless cycle. I haven't seen this prior to 1.6 Donut and I have no clue what might cause this problem.
Here's the Logcat output:
10-21 21:53:09.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): stopNavigating 10-21 21:53:11.177: DEBUG/libgps(74): qct_gps_stop 10-21 21:53:11.187: DEBUG/libgps(74): PDSM_PD_EVENT_END 10-21 21:53:11.187: DEBUG/GpsLocationProvider(74): Releasing wakelock 10-21 21:53:13.097: DEBUG/dalvikvm(74): GC freed 2562 objects / 104912 bytes in 223ms 10-21 21:53:20.227: DEBUG/dalvikvm(74): GC freed 1345 objects / 51352 bytes in 236ms 10-21 21:53:21.180: DEBUG/GpsLocationProvider(74): ALARM_WAKEUP 10-21 21:53:21.187: DEBUG/GpsLocationProvider(74): startNavigating 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_set_position_mode = 1, fix_frequency = 10 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_start 10-21 21:53:21.207: DEBUG/GpsLocationProvider(74): Acquiring wakelock 10-21 21:53:22.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:24.167: DEBUG/GpsLocationProvider(74): TTFF: 2978 10-21 21:53:27.287: DEBUG/dalvikvm(74): GC freed 1417 objects / 52512 bytes in 232ms 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): stopNavigating (and so forth)
A web research for these logs didn't turn up anything (which is unusual in my experience), so this leads me to post the question here wondering what the root of the problem might be.
I am new to android, and ended up (have to) ask a question here, Let's make it simple, I simply want to make my own TextView-like (MyView extends View). This is my code:
public class MyView extends View { private Paint mPaint; private String mText;
private Bitmap mBitmap1; private Bitmap mBitmap2; public MyView(Context context) {
super(context); initView(); } public MyView(Context context, AttributeSet attrs) {
super(context, attrs); initView(); } private final void initView() {
mPaint = new Paint(); } public void setText(String text) { mText = text;
} @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int measuredWidth = measureWidth(widthMeasureSpec);
if (mBitmap1 == null) initBitmap1(measuredWidth);
int measuredHeight = measureHeight(heightMeasureSpec);
setMeasuredDimension(measuredWidth, measuredHeight);
} private void initBitmap1(int measuredWidth) {
mBitmap1 = Bitmap.createBitmap(measuredWidth, Fonts.getHeight(), Bitmap.Config.ARGB_4444);
Canvas canvas = new Canvas(mBitmap1 ); canvas.drawText(mText, 0, 0, mPaint);
} private void initBitmap2() { mBitmap2 = Bitmap.createBitmap(30,
Fonts.getHeight(), Bitmap.Config.ARGB_4444); Canvas canvas = new Canvas(mBitmap2;
canvas.drawText(mText, 0, 0, mPaint);}
private int measureWidth(int widthMeasureSpec) { int measuredWidth = 0;
int specWidthMode = MeasureSpec.getMode(widthMeasureSpec);
int specWidthSize = MeasureSpec.getSize(widthMeasureSpec);
if (specWidthMode == MeasureSpec.EXACTLY) { measuredWidth = specWidthSize;
} else { measuredWidth = getWidth(); if (specWidthMode == MeasureSpec.AT_MOST) {
measuredWidth = Math.min(measuredWidth, specWidthSize);
} } return measuredWidth; }
private int measureHeight(int heightMeasureSpec) {
int measuredHeight = 0; int specHeightMode = MeasureSpec.getMode(heightMeasureSpec);
int specHeightSize = MeasureSpec.getSize(heightMeasureSpec);
if (specHeightMode == MeasureSpec.EXACTLY) {
measuredHeight = specHeightSize; } else { measuredHeight = 80;
if (specHeightMode == MeasureSpec.AT_MOST) { measuredHeight = Math.min(measuredHeight, specHeightSize);
} } return measuredHeight; }
@Override protected void onDraw(Canvas canvas) {
super.onDraw(canvas); canvas.drawBitmap(mBitmap1, getLeft(), 0, mPaint);
initBitmap2(); canvas.drawBitmap(mBitmap2, getLeft(), 30, mPaint); } }
None of my apps work in the emulator. I am running Ubuntu 9.10 and everytime I try to access my UI, the app crashes. All I get is an "Sorry! The application ... has stopped unexpectedly". For EVERY app this happens.
package com.mohit.helloandroid;
import android.app.TabActivity; import android.content.Intent;
import android.content.res.Resources; import android.os.Bundle; import android.widget.TabHost;
public class HelloAndroid extends TabActivity {
/** Called when the activity is first created. */
@Override public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState); setContentView(R.layout.main);
Resources res = getResources(); //Resource object to get drawables
TabHost tabHost = getTabHost(); //The activity tabhost
TabHost.TabSpec spec; //Reusable tab spec Intent intent;
intent = new Intent().setClass(this, HelloAndroid.class);
spec = tabHost.newTabSpec("artists").setIndicator("Artists", res
.getDrawable(R.drawable.tab_artists)) .setContent(intent);
tabHost.addTab(spec); } }
I don't know how this code could possibly throw a message like that.
I am using Android 2.2 (API Level 8). The camera is enabled in the manifest. When I try the camera icon provided by the emulator model, it runs for a few seconds showing a gray box moving around a black and white checkerboard, then dies with the error message...
View 1 Replies View RelatedI have a Motorola i1 which has the 1.5 software.When I press *#*#4636#*#* on the i1, it accesses the hidden menu.when i do that, and select 'phone information' i get the error 'com.android.phone' has stopped unexpectedly.does anyone else get this error? I'm trying to access this menu to change the SMS service number which i believe is there
View 2 Replies View RelatedOn some of the AVDs I've created, input text gets displayed as logograms, even in the emulated Browser application (see the screen shot at http://eduneer.com/screenshot_avd_text.png). Has anyone else experienced this or have a tip on fixing it?
OS: Vista Eclipse version: 3.5.2 JDK version: 1.6.0.14