Android :: How To Get Debugging Statements In Eclipse
Apr 20, 2010
I've read the lame documentation, and checked other answers.I'd like my Android app to print some debug statements in the logcat window of Eclispe. If I use the isLoggable method on the various types of debug levels on the Log class, I find that WARN and INFO are returning true and Log.i do not produce any output.Does anyone know which gotchas I've missed?And just to vent, why should this be hard? I've published apps for iphone and bberry and while appreciate the use of java, the platform is reeking of too many "genuiuses" being involved. I suppose Activities and Intents are very flexible, but why? I just want to put up some screens, take some input and show some results. The bberry pushscreen and popscreen is a lot less pretentious.
View 2 Replies
Oct 16, 2010
I've turned on USB debugging.I have the latest HTC Sync and android SDK components.I'm using Eclipse 3.5 on windows XP. I'm running Android 2.2, and am asking for 2.1 as the minimum in the debugger.I work in Eclipse/Java just about every day, and have for several years.I'm even writing an Eclipse plugin at work as I type this neither Eclipse nor Java are new to me by quite a stretch.When I start a debug session for the "Skeleton App" sample project, I can see my Evo, and the activity launches (with any freshly saved changes), should I select it.I have tried different android connection types (charge only, disk drive, HTC Sync, and USB tethering) to no avail. I've tried Eclipse 3.6 for a bit before yielding to the inevitable and reinstalling 3.5. I monkeyed with the emulator for a while but ran into a different set of issues (I had to reboot the emulator every time I wanted to make a change... Eclipse's auto-build/hot-swap has me spoiled).Is there something I can add to (or remove from) the AndroidManifest.XML to deal with this? A magical incantation perhaps? Must I pray towards San Jose three times a day on a rug woven from kernel gurus' vast and scruffy beards? Is my Evo not Kosher? Must I be "sky clad" while debugging? Shall I teach my laptop to genuflect?
View 3 Replies
View Related
Nov 29, 2009
When I run my app on my phone from eclipse, it always runs in debug. This has only recently started to happen. I guess I must have inadvertently changed a preference or something, but can't work out what. Does anyone know how I can switch it back so I can run without debugging?
View 2 Replies
View Related
Mar 31, 2010
I've obviously been spoiled by Visual Studio, because although I'm just learning Android and the Eclipse environment, debugging apps in Eclipse is becoming a serious detriment to further development.And then, when it executes it under the debugger, I will get a full screen of useless debug info, non of which actually points me to the specific line containing the error.The stackTrace is null within the exception ('e') info tree, and it simply states a message stating 'ArithmeticException'. (that's nice, how about you point me in the direction of where you found it!?)I've looked all over the screen and am baffled that this IDE can't get this right. Does developing with Eclipse resort everyone back to 1991 with printf() like logging at every interval then to track down bugs? Seriously.Is there a configuration or plug-in that I'm missing to help with this?I haven't tested this case with XCode, but if the iPhone dev. IDE handles this more like Visual Studio, then no wonder the Android marketplace has so few apps.
View 4 Replies
View Related
Aug 2, 2010
I am just starting to learn Android development using the Android SDK and Eclipse. I can get my HelloWorld starting app to run in the device emulator, but not on my Verizon Droid handset. I have downloaded the drivers for Windows 7 and I can see the files on the handset in Windows Explorer, so I'm assuming I have the drivers working. I have enabled the USB Debugging on the handset.The problem is that when I set the Debug mode to Manual in Eclipse, I do not see my device in the "Choose device" list.What am I missing?
View 2 Replies
View Related
May 15, 2009
I am trying to debug android source code with ecliplse. And I can see that eclipse has connect to emulator via ddms. And I can see the log coming out from eclipse, but when I select an process in DDMS, and trying to debug the process, process can't stop on the breakpoint I have set.I think there might be some thing incorrect somewhere. Can anybody give some advice?
View 4 Replies
View Related
Dec 15, 2009
I've many times debugged my Java EE code running on Tomcat and JBoss quite effectivley with Eclipse, but I'm running into a brick wall debugging an Android app on the Droid. I think I have to debug on the device and not the AVM because the app interacts with MapView, GPS, etc. Maybe I need to use the AVM to effectively debug?What happens is I get NullPointerException or ArrayOutOfBoundsException in the main thread at something like ViewRoot.draw(boolean) line: 1373. Of course, by default, the source won't be found. So I downloaded the source with Git and pointed Eclipse at it. However, I think I don't have the right source, because the line is that the exception appears to have been thrown from is not completely relevant. How can I be sure I'm using the correct source code for debugging the Droid? After writing this, I've found that although Eclipse is not displaying the little green dot when I set a breakpoint in the Andorid code, it does show up in the breakpoint view and I can step through the code. Not sure if this helps me. Is it perhaps my ignorance of Dalvik and/or debugging threaded code?
View 4 Replies
View Related
May 24, 2010
I have some piece of code which uses JNI. I can debug code wrote in Java directly in Eclipse (using ADT). I even have a script, which help me debug native code with gdb. However this is not very comfortable way for doing this.Is it possible to configure Eclipse to use gdb (I guess gdbserver) for debbuging android native applications? Do you know where I could find any description of this?
View 1 Replies
View Related
Sep 15, 2010
how can i debug the android telephony and radio service part of android (system_server) using eclipse debugging tool.
View 3 Replies
View Related
Jan 18, 2010
How can I debug some system process (...acore), for example, the status bar, in Eclipse ? I couldn't find any help online yet. I'm able to debug a normal application, but not system threads (windowManagerSevice etc).Also, when I open the Android source in Eclipse using the official instructions, I get build errors, is it OK ? (already executed "make" successfully)
View 2 Replies
View Related
Apr 12, 2010
I've installed the Android SDK and the ADT plugin, but Android doesn't show up in the Window>Preferences dialog.I'm running Galileo. If I go to the Installation Details part of the About Eclipse dialog, it says that I have 0.9.6 of Android DDMS and Android Development Tools. I can run adb from the command line. I tried going around the uninstall/reinstall loop once.I'm on Windows Vista. I also have 2.7.7 of the Scala plugin installed, but I tried uninstalling that.
View 3 Replies
View Related
Jul 7, 2010
I have a Android phone connected with host computer with USB cable. ADB runs well and I can debug application on phone. The only problem is that the App requires special network setup which I can reach on host but not mobile. Is there a way to let the device send all network operations through ADB and Host network?
View 1 Replies
View Related
Jun 17, 2010
the Java sources for the Android framework are available at source.android.com. Can I download and feed them to Eclipse so that I can step into framework methods while debugging? Better yet, does anyone know of an Eclipse plug-in that would get them from Android Git automatically as needed?during debugging, I can step through the framework code; I can see local variables by their declared names, and line numbers as well. It seems like the debug info is already there - only the source file is missing. While I can open it in parallel and watch the execution unfold, the question of version matching remains. Of many versions of the class file in Git, how do I pick one that matches whatever is running on the device (or emulator)? This is more of a Git navigation question - how do I pick up the very version of the file that went into Android release, say, 2.2?
View 1 Replies
View Related
Jul 25, 2010
I am a newbie to Android and the Eclipse development environment and would like some advice on best practices for debugging my apps when they throw a Force Close.I have researched ADB, however, I can not get this to interact with my phone even though I have explicitly turned debug mode to true on my test handset.Obviously Android comes with a LOG method which I have seen utilized in many example apps, can someone please explain how to review these logs quickly and how to setup logging appropriately to determine the cause of a Force Close (always occurs when I push the Home button).Any advice on debugging effectively in Eclipse would be much appreciated!
View 2 Replies
View Related
Oct 1, 2010
I have a simple Android Service, which should start on device bootup. However, I cannot debug this using Eclipse on Windows.
The error I get from Logcat is
CODE:................
My manifest looks like
CODE:............
I have a breakpoint in my ServiceAutoStarter code (below), which is never hit.
CODE:......................
View 2 Replies
View Related
Aug 8, 2010
I am developing a simple android application using eclipse.I wrote a JUnit TestCase for a class I wrote.One particular test compares two 2d arrays so see if they are equal. If they are not equal the test fails.When the test fails I would like to print out the contents of the offending array to see what went wrong. I have tried System.out.print and it doesn't show up in the console or JUnit results.What am I doing wrong?Is it even possible?
View 1 Replies
View Related
Aug 15, 2010
I am developing on Windows machine.I was working quite well until yesterday, when I saw the the update prompt and updated my ADT plugin. Today when I tried debugging my test project, I experienced either one the following cases:
1) Logcat stops forever on the message "sending wait chunk".
2) Logcat shows the following message, and test project fails:
3) Eclipse stops responding.
The above cases happens even when the test unit contains nothing.Also it just doesn't not work in debug. The test case runs successfully if it is not in debug mode (But there are still some glitches, like Logcat sometimes won't emit debug messages).
View 2 Replies
View Related
Jul 2, 2010
I am new to android development and have been playing around with the tutorials offered at developer.android.com.I don't have a problem with projects I create from scratch, but when I start a project from the android sample code provided at android.com or from any other android project, I can never seem to get the bugs out to even run the thing.For example, when loading up the NotePad sample in the android-7 package of samples.would like a general solution, something more global bc this is occurring whenever I pull in anyone's source code from outside.kind of frustrated because I feel that I am spending too much time working out these kinks and not being able to study other people's code against how it performs in the emulator.
View 3 Replies
View Related
Apr 2, 2009
While doing debugging with Eclipse I noted that the debugger highlights the wrong line as "next line to execute" for methods with multiple return points. It fools the developer that the last line of the method is executed, where in fact it is not.Does anyone know if this is some kind of known issue? My colleagues have also experienced this but we have never seen it when doing on- device-debugging on e.g. the Sony Ericsson SDK.I couldn't find anything at http://code.google.com/p/android/issues/list There was a similar post in android-beginners 2007-11-25. No replies, though. http://groups.google.com/group/android-beginners/browse_thread/thread.
View 2 Replies
View Related
Feb 2, 2009
I can run the unit test cases either by :
1. command line ' adb shell am instrument -w com.example.android.apis.tests/android.test.InstrumentationTestRunner'
2. Go to 'Dev' and clicks 'Instrumentation' and click 'Test API Demo'.But my questions now is, how can I debug my unit test cases? I try 'Debug' my APIDemoTest eclipse project and then do #2 above, it did not break at any of my breakpoints I setup.
View 3 Replies
View Related
Nov 24, 2010
I can't get adb to recognising my HTC Desire on my new upgrade of Ubuntu 10.10 Maverick Meerkat.adb devices shows List of devices attached no permissions Now, there are plenty of tutorials for changing rule files under /etc/udev/rules.d/.However, I cannot find one specific for 10.10.Can anyone tell me whether the rule file name and content is the same as described at link text, or are we looking at some new settings for this new release?
View 2 Replies
View Related
Jan 6, 2010
I am starting with Android programming with the help of Unlocking Android / Manning which came from Santa and is a pretty good book. After running a few little tests and examples, I'm moving towards developing the concepts for my own application.I want my App to execute as a Home Widget and I'm using this example as my model to get started.While I am able to load and run in the Android ADB emulator the code example in the example's Wiktionoary which is a normal Android App. I am not able to run, but only load into the emulator the Widget version of that code named SimpleWiktionary.Am I am able to debug Android Home Widgets with the emulator? If so, what am I missing on starting/activating the Widget or having it show up in the Apps window?
View 3 Replies
View Related
Feb 3, 2010
If I override my main Activity's onDestroy() method in order to recycle a bitmap when the screen is rotated, should I call super.onDestroy() before or after myBitmap.recycle()? Does it matter?
View 1 Replies
View Related
Nov 5, 2010
I am preparing a new update of my application, in this version I need to insert lot of new rows (200) in my db.
Because I don't want to programatically add 200 insert code line for each row, I would like to know what is the best method to accomplish it just with a call to the file and dumping it into my db.
View 4 Replies
View Related
Jan 29, 2012
I'm trying to encrypt a text with DES algorithm using Bouncy Castle library. I have written the following code:
Code:
try{
KeyGenerator kg=KeyGenerator.getInstance("DES");
SecretKey key=kg.generateKey();
[Code]....
Then depending on the user selection, inputText is encrypted or encText is decrypted in the switch statement. Both encryption and decryption blocks share the same "keySpec" and "Cipher" variables generated in the above code snippet. However, the compiler says that keySpec and Cipher cannot be resolved which I understand is that the keySpec and Cipher generated cannot be seen by the statements inside the switch blocks. How can I make it work?
View 5 Replies
View Related
Jul 6, 2010
The log is as following:
CODE:..................
View 2 Replies
View Related
Jul 16, 2010
Is there any way to secure call history for one of the phones in family plan, or will the primary account allways have access to every call any phone makes via the statements or online access?
Also, How much browser and download history information is available in statements and online for all phones on the family plan?
So is anybody doing seamless VIOP from the EVO on 3g? If so how? will VOIP calls show up in any logs outside the phone?
Any ETA on when it will get Skype without some third party? How about true multitasking while on Sprint Voice Call? I honestly can't believe it does not offer those two, I'm sure millions will jump when those come in.
BTW, I tested tethering with PDANet on 3g last night .. It worked great - not crazy fast, but good enough in a pinch.
I'm still waiting for 4g in the big city I live in.
For me, these are the monster items I've been waiting for.. Fast tethering, Voip Video and voice client , multitasking with voice.
One cool feature I will use tons is Voice command and Voice Typing.. they work awsome.
View 23 Replies
View Related
Oct 13, 2010
the idea is that once if/else determines that the onTouch event was caused by clash and the switch statement then determines what to do based on the action. i don't know if the problem is that the switch statements are not returning true and that may be related to the problem. when i add a return, eclipse says that the code is unreachable which i don't understand. i was under the impression that you can't break out of a switch without break. what's actually happening is that the first sound will loop but the code never seems to detect the action up when the button is released and so the sound plays forever.
View 1 Replies
View Related
Dec 3, 2010
I am planning to buy a 32 gb micro sdhc card for my Xperia X10.However, I have found tons of confusing and conflicting information here on SE forums and all over the net.To my surprise, even Sony Ericsson itself giving conflicting information regarding this.On the product page of Xperia X10 (click this link and click on the specifications), it says that Xperia X10 supports microSD up to 16GB only.Whereas the official Sony Ericsson Xperia X10 White paper (on page no.5) says that it supports -microSD, up to 32 GB. (The Sony Ericsson Xperia X10 White paper can be downloaded from this link).Now i urge someone, preferably an SE moderator or staff, to enlighten on this matter and answer how and why SE is giving contradictory and confusing statements regarding the sd card capability and compatibility for the same product?.
View 1 Replies
View Related
Jun 22, 2010
I want to get started with an Android application but can't download the plug-in.
Anyone know where else I can get this?
View 3 Replies
View Related
