How can I debug some system process (...acore), for example, the status bar, in Eclipse ? I couldn't find any help online yet. I'm able to debug a normal application, but not system threads (windowManagerSevice etc).Also, when I open the Android source in Eclipse using the official instructions, I get build errors, is it OK ? (already executed "make" successfully)
View 2 Replies
how can i debug the android telephony and radio service part of android (system_server) using eclipse debugging tool.
View 3 Replies View RelatedI've turned on USB debugging.I have the latest HTC Sync and android SDK components.I'm using Eclipse 3.5 on windows XP. I'm running Android 2.2, and am asking for 2.1 as the minimum in the debugger.I work in Eclipse/Java just about every day, and have for several years.I'm even writing an Eclipse plugin at work as I type this neither Eclipse nor Java are new to me by quite a stretch.When I start a debug session for the "Skeleton App" sample project, I can see my Evo, and the activity launches (with any freshly saved changes), should I select it.I have tried different android connection types (charge only, disk drive, HTC Sync, and USB tethering) to no avail. I've tried Eclipse 3.6 for a bit before yielding to the inevitable and reinstalling 3.5. I monkeyed with the emulator for a while but ran into a different set of issues (I had to reboot the emulator every time I wanted to make a change... Eclipse's auto-build/hot-swap has me spoiled).Is there something I can add to (or remove from) the AndroidManifest.XML to deal with this? A magical incantation perhaps? Must I pray towards San Jose three times a day on a rug woven from kernel gurus' vast and scruffy beards? Is my Evo not Kosher? Must I be "sky clad" while debugging? Shall I teach my laptop to genuflect?
View 3 Replies View RelatedWhen I run my app on my phone from eclipse, it always runs in debug. This has only recently started to happen. I guess I must have inadvertently changed a preference or something, but can't work out what. Does anyone know how I can switch it back so I can run without debugging?
View 2 Replies View RelatedI've obviously been spoiled by Visual Studio, because although I'm just learning Android and the Eclipse environment, debugging apps in Eclipse is becoming a serious detriment to further development.And then, when it executes it under the debugger, I will get a full screen of useless debug info, non of which actually points me to the specific line containing the error.The stackTrace is null within the exception ('e') info tree, and it simply states a message stating 'ArithmeticException'. (that's nice, how about you point me in the direction of where you found it!?)I've looked all over the screen and am baffled that this IDE can't get this right. Does developing with Eclipse resort everyone back to 1991 with printf() like logging at every interval then to track down bugs? Seriously.Is there a configuration or plug-in that I'm missing to help with this?I haven't tested this case with XCode, but if the iPhone dev. IDE handles this more like Visual Studio, then no wonder the Android marketplace has so few apps.
View 4 Replies View RelatedI've read the lame documentation, and checked other answers.I'd like my Android app to print some debug statements in the logcat window of Eclispe. If I use the isLoggable method on the various types of debug levels on the Log class, I find that WARN and INFO are returning true and Log.i do not produce any output.Does anyone know which gotchas I've missed?And just to vent, why should this be hard? I've published apps for iphone and bberry and while appreciate the use of java, the platform is reeking of too many "genuiuses" being involved. I suppose Activities and Intents are very flexible, but why? I just want to put up some screens, take some input and show some results. The bberry pushscreen and popscreen is a lot less pretentious.
View 2 Replies View RelatedI am just starting to learn Android development using the Android SDK and Eclipse. I can get my HelloWorld starting app to run in the device emulator, but not on my Verizon Droid handset. I have downloaded the drivers for Windows 7 and I can see the files on the handset in Windows Explorer, so I'm assuming I have the drivers working. I have enabled the USB Debugging on the handset.The problem is that when I set the Debug mode to Manual in Eclipse, I do not see my device in the "Choose device" list.What am I missing?
View 2 Replies View RelatedI am trying to debug android source code with ecliplse. And I can see that eclipse has connect to emulator via ddms. And I can see the log coming out from eclipse, but when I select an process in DDMS, and trying to debug the process, process can't stop on the breakpoint I have set.I think there might be some thing incorrect somewhere. Can anybody give some advice?
View 4 Replies View RelatedI've many times debugged my Java EE code running on Tomcat and JBoss quite effectivley with Eclipse, but I'm running into a brick wall debugging an Android app on the Droid. I think I have to debug on the device and not the AVM because the app interacts with MapView, GPS, etc. Maybe I need to use the AVM to effectively debug?What happens is I get NullPointerException or ArrayOutOfBoundsException in the main thread at something like ViewRoot.draw(boolean) line: 1373. Of course, by default, the source won't be found. So I downloaded the source with Git and pointed Eclipse at it. However, I think I don't have the right source, because the line is that the exception appears to have been thrown from is not completely relevant. How can I be sure I'm using the correct source code for debugging the Droid? After writing this, I've found that although Eclipse is not displaying the little green dot when I set a breakpoint in the Andorid code, it does show up in the breakpoint view and I can step through the code. Not sure if this helps me. Is it perhaps my ignorance of Dalvik and/or debugging threaded code?
View 4 Replies View RelatedI have some piece of code which uses JNI. I can debug code wrote in Java directly in Eclipse (using ADT). I even have a script, which help me debug native code with gdb. However this is not very comfortable way for doing this.Is it possible to configure Eclipse to use gdb (I guess gdbserver) for debbuging android native applications? Do you know where I could find any description of this?
View 1 Replies View RelatedI've installed the Android SDK and the ADT plugin, but Android doesn't show up in the Window>Preferences dialog.I'm running Galileo. If I go to the Installation Details part of the About Eclipse dialog, it says that I have 0.9.6 of Android DDMS and Android Development Tools. I can run adb from the command line. I tried going around the uninstall/reinstall loop once.I'm on Windows Vista. I also have 2.7.7 of the Scala plugin installed, but I tried uninstalling that.
View 3 Replies View RelatedI have a Android phone connected with host computer with USB cable. ADB runs well and I can debug application on phone. The only problem is that the App requires special network setup which I can reach on host but not mobile. Is there a way to let the device send all network operations through ADB and Host network?
View 1 Replies View Relatedthe Java sources for the Android framework are available at source.android.com. Can I download and feed them to Eclipse so that I can step into framework methods while debugging? Better yet, does anyone know of an Eclipse plug-in that would get them from Android Git automatically as needed?during debugging, I can step through the framework code; I can see local variables by their declared names, and line numbers as well. It seems like the debug info is already there - only the source file is missing. While I can open it in parallel and watch the execution unfold, the question of version matching remains. Of many versions of the class file in Git, how do I pick one that matches whatever is running on the device (or emulator)? This is more of a Git navigation question - how do I pick up the very version of the file that went into Android release, say, 2.2?
View 1 Replies View RelatedI am a newbie to Android and the Eclipse development environment and would like some advice on best practices for debugging my apps when they throw a Force Close.I have researched ADB, however, I can not get this to interact with my phone even though I have explicitly turned debug mode to true on my test handset.Obviously Android comes with a LOG method which I have seen utilized in many example apps, can someone please explain how to review these logs quickly and how to setup logging appropriately to determine the cause of a Force Close (always occurs when I push the Home button).Any advice on debugging effectively in Eclipse would be much appreciated!
View 2 Replies View RelatedI have a simple Android Service, which should start on device bootup. However, I cannot debug this using Eclipse on Windows.
The error I get from Logcat is
CODE:................
My manifest looks like
CODE:............
I have a breakpoint in my ServiceAutoStarter code (below), which is never hit.
CODE:......................
I am developing a simple android application using eclipse.I wrote a JUnit TestCase for a class I wrote.One particular test compares two 2d arrays so see if they are equal. If they are not equal the test fails.When the test fails I would like to print out the contents of the offending array to see what went wrong. I have tried System.out.print and it doesn't show up in the console or JUnit results.What am I doing wrong?Is it even possible?
View 1 Replies View RelatedI am developing on Windows machine.I was working quite well until yesterday, when I saw the the update prompt and updated my ADT plugin. Today when I tried debugging my test project, I experienced either one the following cases:
1) Logcat stops forever on the message "sending wait chunk".
2) Logcat shows the following message, and test project fails:
3) Eclipse stops responding.
The above cases happens even when the test unit contains nothing.Also it just doesn't not work in debug. The test case runs successfully if it is not in debug mode (But there are still some glitches, like Logcat sometimes won't emit debug messages).
How can I get and modify files on the system without activating the usb android debugging?
View 1 Replies View RelatedI am new to android development and have been playing around with the tutorials offered at developer.android.com.I don't have a problem with projects I create from scratch, but when I start a project from the android sample code provided at android.com or from any other android project, I can never seem to get the bugs out to even run the thing.For example, when loading up the NotePad sample in the android-7 package of samples.would like a general solution, something more global bc this is occurring whenever I pull in anyone's source code from outside.kind of frustrated because I feel that I am spending too much time working out these kinks and not being able to study other people's code against how it performs in the emulator.
View 3 Replies View RelatedWhile doing debugging with Eclipse I noted that the debugger highlights the wrong line as "next line to execute" for methods with multiple return points. It fools the developer that the last line of the method is executed, where in fact it is not.Does anyone know if this is some kind of known issue? My colleagues have also experienced this but we have never seen it when doing on- device-debugging on e.g. the Sony Ericsson SDK.I couldn't find anything at http://code.google.com/p/android/issues/list There was a similar post in android-beginners 2007-11-25. No replies, though. http://groups.google.com/group/android-beginners/browse_thread/thread.
View 2 Replies View RelatedI have installed the [ROM] Lenovo P780 Pre-rooted Official ROMs for Flash Tool with TWRP and now I do not find the "USB Debugging" option in the App option of System Settings. Instead appear a list of the applications installed where I can select any app change options.
This ROM comes configured to Root as default.
I can run the unit test cases either by :
1. command line ' adb shell am instrument -w com.example.android.apis.tests/android.test.InstrumentationTestRunner'
2. Go to 'Dev' and clicks 'Instrumentation' and click 'Test API Demo'.But my questions now is, how can I debug my unit test cases? I try 'Debug' my APIDemoTest eclipse project and then do #2 above, it did not break at any of my breakpoints I setup.
I can't get adb to recognising my HTC Desire on my new upgrade of Ubuntu 10.10 Maverick Meerkat.adb devices shows List of devices attached no permissions Now, there are plenty of tutorials for changing rule files under /etc/udev/rules.d/.However, I cannot find one specific for 10.10.Can anyone tell me whether the rule file name and content is the same as described at link text, or are we looking at some new settings for this new release?
View 2 Replies View RelatedI am starting with Android programming with the help of Unlocking Android / Manning which came from Santa and is a pretty good book. After running a few little tests and examples, I'm moving towards developing the concepts for my own application.I want my App to execute as a Home Widget and I'm using this example as my model to get started.While I am able to load and run in the Android ADB emulator the code example in the example's Wiktionoary which is a normal Android App. I am not able to run, but only load into the emulator the Widget version of that code named SimpleWiktionary.Am I am able to debug Android Home Widgets with the emulator? If so, what am I missing on starting/activating the Widget or having it show up in the Apps window?
View 3 Replies View RelatedI am a platform developer and want to know how I can debug through the Android System code. I am making changes to the WindowManagerService and see a lot of statements like: (DEBUG_FOCUS) Log.v(TAG, "Clearing focused app, was " + mFocusedApp). My question is, how do I take advantage of these logs? I am using Eclipse on Ubuntu 9.10 and I have no idea how to actually debug this code.
View 5 Replies View RelatedThe Eclipse build for my 1.6 application project is succeeding and the Ant build is failing. I'm looking for help on why they aren't behaving the same way.
We are developing on Mac OSX 10.5.8 with Eclipse 3.5 against SDK 1.6 + Google APIs. There are no setting changes in Eclipse, either at workspace or project level. Similarly, our ant is also a vanilla-flavored unmodified installation of 1.7.1. JDK is 1.5.0_22. The CLASSPATH environment variable is not set. JAVA_HOME is /Library/Java/Home
The application was initially created by a team member using the Eclipse plugins. The application references two jar files, one of which has a dependency on javax.xml.bind.annotation.XmlSeeAlso, which is not defined anywhere in our code or in android.jar. The other jar file has an explicit dependency on android.jar. I generated the Ant build file using android update.
The Eclipse project builds an apk and runs the application in the emulator. I think this is incorrect behavior.
The Android ant project fails to build. I think this is correct behavior. MyClass.java:98: cannot access javax.xml.bind.annotation.XmlSeeAlso [javac] file javax/xml/bind/annotation/XmlSeeAlso.class not found
Why the two build methods are behaving differently? I would expect them both to fail.
My app code is starting to get unmanageable and I want to start source control, primarily because I need to branch my code.
What are some good systems that you have used in the past and what would you recommend to me.
Requirements:
Must be free
Must integrate with eclipse
Must work well with android development plugin
I have an app which declares a BroadcastReceiver, the receiver gets the broadcast, does what it needs to, then ends ensuring that everything is tidied up as needed. When I examine the system through the DDMS view in Eclipse the process for the application is still running after the receiver has completed. I've even boiled it down to a simple test case which gets a shared preferences instance from the context, checks a random setting, and then exits, and, when run on the 1.5 emulator (which is the minimum supported OS level) the process is still hanging around.The reason this is an issue is memory usage (which shows under DDMS as around 2MB).I've had queries about why the application still uses up memory even when it's not doing anything, so, my question is; Is this behaviour normal, or have I missed something that would make the process exit?
View 9 Replies View RelatedI've been able to send data via shared memory between threads within a process using MemoryFile.I then tried to send data between a service and an activity in different processes, but the data did not get passed. The name for each call the MemoryFile's constructor was the same.Is it possible to share data between processes using a MemoryFile?
View 6 Replies View RelatedI have a singleton class and I am using it to access databases. I would like to know how it would behave if I use the same from my remote service class which runs as a separate process. Will it create a new instance in that process or will it use the instance from the other process?
View 3 Replies View Related