Does anyone know how to get user input for floats,doubles,ints. I have tried looking everywhere on here and there hasn't been anything that could help me. All it has is EditText.GetText().toString() very frustrated that there isn't a tutorial for this.
View 2 Replies
I have a EditText in android in which i want the user to enter the text and checks for the condition "BYE"
Code sample..
How can i make user to enter the text?The UI should wait for the text to be entered(something like we have InputStreamReader in java applications).
Installed Handcent and I'm getting double notifications when a new text comes in. I recall going into System and disabling the notification for the standard Messaging app but I can't seem to find it.
View 2 Replies View RelatedMy phone seems to register double touch input while i am only using one finger. It only happens only when i pass the my finger over the middle of the screen, ie. a horizontal line in the middle of the screen. This is affecting scrolling and tapping on anything in the middle of the screen.
I just want to know if this a software (calibration) issue or a problem with the screen itself.
See attached a screenshot of multi-touch test using 'Display Tester'.
I've been looking at the new 1.5_pre SDK today, and the new AppWidget API in particular. I was hoping to write a widget for posting to Twitter as part of my nanoTweeter app. The interface I had in mind would look very similar to the Google Search widget, with an EditText and a submit Button, but as far as I can see there's no way to get at user input in a RemoteViews. Is that right, or am I overlooking something?
View 6 Replies View RelatedI would like to use EditTextPreference to show 2 input fields instead of 1. For instance, a username and password field should be shown. I don't want to use a dialog for each one. How can this be done? In the WiFi settings there is one that does this, when you want connect to a protected network, a dialog shows to set a password for the credential storage with 2 fields.
View 1 Replies View RelatedI'm looking to edit the user input functionality for the browser. Does anyone know where in the source code user input controls browser functionality?
View 2 Replies View RelatedI need to filter List View as per the user's input in the Edit Text Field.If the user Enter the letter 'a' i need to show the list items starts with 'a'.Can anyone give some ideas to me to solve this ? Thanks in advance?
View 2 Replies View RelatedDepending upon the user i may need to move it to right ,left,top or bottom.
Should i use animation for the purpose?
Or is there any method to move image dynamically?
I meant the things in android application
When I load the touch Facebook login page in the webview, I want that the email field to be set to a value and it can't be modified and to accomplish that I have inserted a JavaScript code in the webview disabling that element. All works fine until I want to click the login button because the page refreshes instead of submit the login info. I've noticed that if I don't disable the item, the login button works fine but I don't know why occurs that.
What can be the problem? I've thought another way to make it works: Whenever the user try to modify the email field ignore whatever he do, but I think this is a less professional way to fix that.
I have a custom dialog displayed to input user info (ID). This appears on top of an activity with an 'Done' button, however when the edittext is selected and the soft keyboard appears, the keyboard obscures the Done button at the bottom of the dialog. The documentation / blog posts are a little dry on info specifically for dialogs, what do I need to include to get the dialog to pan up or otherwise?
View 5 Replies View RelatedI have a widget that displays a set of information. What I would like to do is to give the user the opportunity to choose the background color/image. I would like to have a popup when the user is selecting the widget to choose the background. So how would I make the popup? And how would I apply the background dynamically?
View 1 Replies View RelatedAfter using 2.0 from mustymod for few times/days, I have thinking that update to 2.0 maybe not best idea for me.
2.0 from mustymod has better responsive for user's operation, less lag felling. better google apps and later android apps. adyno show around 130ms. But smooth felling may changed after full function come out, since it means more service will running background.
Galaxo that i used till now is little lag while user input. outdated google apps. adyno show around 220ms.
But it can be improved if Drakaz keep updating it with new idea(maybe from xda). and it did have full functions. My daily used apps & data is on it now, and some of them can not running under 2.0. udpate galaxo will keep my data going, no needs to wipe/reset.
My conclusion is, while Drakaz trying to modding 2.0, I wish he can find out why 2.0 is running better on Galaxy and porting it back to Galaxo. My wish is keep Galaxo going till 2.0/2.1 stable & more market apps support it.
Double mChange = Double.parseDouble("7.1") - Double.parseDouble ("7.15"); Float mChange = Float.parseFloat("7.1") - Float.parseFloat("7.15"); mChange should be -0,05 in both cases, right? So why is mChangeD = -0.05000019 ???
View 5 Replies View RelatedI have a JSON Object with a latitude and longitude String on which I get the values doing this: String latitude = picInfo.getString("latitude"); String longitude = picInfo.getString("longitude");Then I convert them to floats like this: float latInt = Float.valueOf(latitude).floatValue(); float longInt = Float.valueOf(longitude).floatValue();And place them on a GeoPoint like this: GeoPoint X = new GeoPoint((int) (latInt*1E6),(int) (longInt*1E6) ); Debugging this values I can see JAVA approximates the values, is there anyway to keep them exactly the same?
View 6 Replies View RelatedI have an EditText for which will be using for a float number. So I'm trying to read the text from the EditText and put it into a float variable. But I seem to have a text to float problem.I've tried using Float.parseFloat(string) and just general casting, but nothing seem to do it. What can I do here? Also, is there a way to check for a valid float number before writing it to a variable?
View 1 Replies View RelatedI've read this in a few articles, that one should avoid floating point operations within the physics update of a game.
But how do you really achieve this? Surely all half decent games are going to involve this kind of maths?
Does it mean, convert all your variables to int, or use double instead, or simply just cut it out as much as possible?
I'm looking for a way to implement a minimum value in my SeekBar and also have the option to increment decimal numbers. For example, currently my SeekBar's minimum is set to 0, but I need it to start at the value 0.2. Also, I would like to have the functionality to be able to have the user select a number from 0.2 to 10.0 at a .1 precision so they can choose the numbers 5.6 or 7.1.
Here are the style attributes for my SeekBar:
CODE:..............
So I have an app where I put arbitrary strings in a database and later extract them like this:
CODE:......................
This works fine in all cases except for when the string looks like a float number, for example "221.123123123". After saving it to the database I can extract the database to my computer and look inside it with a DB-viewer, and the saved number is correct. However, when using cursor.getString() the string "221.123" is returned. I cant for the life of me understand how I can prevent this. I guess I could do a cursor.getDouble() on every single string to see if this gives a better result, but that feels sooo ugly and inefficient.
I just made a small test program. This program prints "result: 123.123", when I would like it to print "result: 123.123123123"
CODE:.................
I would like to show a custom input field (specifically, one containing only 9-0 and two extra buttons containing decimal separator (, or .) and a delete button). I could create a custom IME, but (as far as I know) that would have to be set by the user as the system-wide input method. Is there a way to implement an input method and bind it to a specific input field?
View 1 Replies View RelatedI see another thread on Locale, but it seems to be focused on it technical shortcomings. I thought a thread about how people are using this app would be helpful.
Now... I use Locale for the following:
- Turning the ringer down when I get to work (obviouse one)
- Turning GPS/Bluetooth/wifi on when I plug it in the phone (think car dock)
- Turn on Wifi when I get near my known hot spots.
- Turn off GPS/Bluetooth/wifi off and turn down brightness when my battery is low.
And the last one is a good one for me...
- I have a GV number. When I call my phone from that number, it turns the ringer volume all the way up and it turns on wifi and GPS. This is my "lost phone aid". It turns on the locating features so I can see where the phone is using iGoogle and Latitude, and I can hear the phone if it is "in the cushions" on vibrate.
Anyone else get creative with Locale?
Reading values like integers, strings, colors, etc. from resources (xml files) is easy and well defined at http://developer.android.com/guide/topics/resources/available-resourc.... But what about a float value, like 0.1 or 1.4? How can such float value be defined in resource file and accessed from code? Is it possible at all?
View 3 Replies View RelatedI am developing on 2.1 and location updates will not resume after removing them and adding them again.Is this an issue with the system?
View 2 Replies View RelatedIn my ListView, there's one line of code in my ViewBinder that causes lots of garbage collection as I scroll through the list, about every two seconds...
D/dalvikvm(16312): GC freed 13171 objects / 659576 bytes in 162ms D/dalvikvm(16312): GC freed 13122 objects / 654128 bytes in 129ms D/dalvikvm(16312): GC freed 13134 objects / 655416 bytes in 142ms D/dalvikvm(16312): GC freed 13129 objects / 654840 bytes in 129ms D/dalvikvm(16312): GC freed 13149 objects / 655000 bytes in 110ms D/dalvikvm(16312): GC freed 13150 objects / 655720 bytes in 127ms D/dalvikvm(16312): GC freed 13075 objects / 652256 bytes in 111ms D/dalvikvm(16312): GC freed 13232 objects / 659040 bytes in 136ms D/dalvikvm(16312): GC freed 13106 objects / 653920 bytes in 110ms D/dalvikvm(16312): GC freed 13155 objects / 655152 bytes in 110ms
The offending code is here, which formats a price for each item in the list: String price = cursor.getString(columnIndex); final float pricef = Float.parseFloat(price); price = new StringBuffer("$").append(String.format("%. 2f",pricef)).toString(); ((TextView)view).setText(price);
If I comment out the line with String.format, the garbage collection goes away. So what's the "right" way to do this to avoid allocations? That database field holds an unformatted text string which I'm trying to format into proper currency format (example: format "1.5" to "$1.50")
I'm writing a game using Surfaceview and have a question relating to saving Data into a Bundle.
Initially, I had an arraylist which stored the Y co-ordinates (in the form of Integers) of sprites that will move only up and down. Declared as:
Quote:
static ArrayList<Integer> ycoordinates = new ArrayList<Integer>();
I saved them to a Bundle using the following:
Quote:
myBundle.putIntegerArrayList("myycoordinates", ycoordinates);
And restored them using this:
Quote:
ycoordinates.addAll(savedState.getIntegerArrayList ("ycoordinates"));
This all worked perfectly. However, I've had to change the whole coordinates system so it's based on Delta time to allow my sprites to move at a uniform speed across different screens. This is, again, working perfectly.
However, as a result of this change, I now have to store these values as floats rather than integers.
So, I am declaring as:
Quote:
static ArrayList<Float> ycoordinates = new ArrayList<Float>();
So that's the background, now my question is, how do I store and restore values from a Float Arraylist? There doesn't seem to be a "putFloatArrayList" or "getFloatArrayList".
(I've used an Arraylist rather than an Array as the number of sprites needs to be dynamic).
what are these clouds that float by on my screen every time I turn on the Droid? Did I miss something somewhere, is it a android thing or my weather program? How can I turn it off?
View 11 Replies View RelatedSo after rooting my phone. Couple days later i had it charging and decided to turn off my phone and before I knew it. It automatically turn itself back on? Y is that? I am using bb 0.4 p3 kernel 1.0 on blue energy theme.
View 4 Replies View RelatedWhen I trun my phone on, the scene changes from the scene I had chosen (the waving grass) to "current (unsaved)".If I change it to the one I prefer (saved with my name) I am asked to "save or cancel" the incorrect one.I click cancel, and all is well.But why does it change and how do I keep the scene selected that I want?I just want it to stick on the scene that I have chosen.
View 1 Replies View RelatedI simply need to add floatArray1 to floatArray2 storing the result in floatArray2.. no third array. all arrays are one dimensional but are very large. probibly as large as the os will let me get away with. Max i would need is two float arrays with 40,000 floats each. but i could get away with 1/10th that i suppose minimum.Would love to do this in 1/30th or 1/60th of a second but that does not seem possible? Also if the code is JNI,NDK or OpenGL ES thats fine. does android have an assembly language or like machine code i could use somehow?
View 1 Replies View Relatedclass1.java has creates a float[] array that is need to have in class2.java. How do you do this? The float[] is points. Here is an example code:
class1.java
import android.app.Activity;
import android.content.Context;
import android.app.ListActivity;
import android.content.Intent;
import android.graphics.Canvas;
import android.graphics.Color;
import android.graphics.Paint;
import android.graphics.Typeface;......................