Android :: Cannot Start Parent Application / Process Is Bad
May 12, 2009
As an exercise I attempted to add an AppWidgetProvider-derived class to one of our existing Android applications. When the widget is created and appears on the home screen, the output from adb logcat notes: W/ActivityManager(58): Unable to launch app com.mycompany.myapp/ 10042 for broadcast Intent { action=android.appwidget.action.APPWIDGET_ENABLED comp= {com.mycompany.myapp/com.mycompany.myapp.MyAppWidgetProvider} }: process is bad
This output comes from around line 10814 in ActivityManagerService (looking at cupcake on git). This is running on an ADP 1.5, FWIW. The same AppWidget code, once separated from the main application's project and put into its own simple project, runs as expected, so I know my manifest entries/XML/Java are all as they should be. Has anyone else run into this, or perhaps can the Android team comment on what aspect of my application might be preventing the AM from starting up the process when the widget is added to the home screen?
View 6 Replies
Jun 28, 2010
I've a ListActivity with a ListView, onItemClick I start an Intent. Oncreate of this Intent I make a getParent but it's null. if I do this.isChild() it's false.
mPostList.setOnItemClickListener(new OnItemClickListener() {
public void onItemClick(AdapterView<?> parent, View v, int position, long id) {
Intent IntentDiscution = new Intent(parent.getContext(), EcrireMessage.class);
....
IntentDiscution.putExtras(objetbunble);
parentClass.startActivity(IntentDiscution);
}
View 3 Replies
View Related
Nov 3, 2012
i tried to unroot my htc desire hd via htcdev.com's unlock bootloader process...it was successfull..
gradual steps/mistakes...
1. installed clockworkmod from playstore
2. tried to access superuser...but there was some issue with that..
3. when i restarted my phone using vol- key and power button i entered into hboot mode, from where i enter clockworkmod...
4. full wiped the phone, cache and everything that was given in instruction of icecold sandwich..
5. icecold sandwich was there in sd card as zip file....so i chose the "install zip from memory card option"..
6. then there is message of installation completed..
but my phone is unable to start.... there is htc logo and no further process..
View 5 Replies
View Related
Feb 18, 2010
Well right now I have a rooted droid thanks to sholesmod and am running bugless beast 0.7.6 at 800. From what I Have read, it is supposed to be one of the fastest ROMs out there. Too be honest, I have almost noticed it to be slower then .7.5. So I have decided to completely erase everything and start completely from scratch. I was going to go back to stock 2.01 and then do a factory restore. Then I was going to reformat my sd card. Would that be the best route to go if I wanted to start from scratch?
View 4 Replies
View Related
Sep 23, 2010
I have started to port Android on TCC89XX board, I download Android SDK. and applied the patch with kernel 2.6.29, the Processor is having armv6 instruction set. I am not able to see the network up ifconfig is not able to show the network devices.
Also I do not get why there is no "on" binary in the system/bin, system/xbin, the init.rc and init.goldfish.rc. I cannot get the zygote process up. create_socket throws error. If any one knows about this, please tell what I need to do correctly or point me to some correct URL's.
View 2 Replies
View Related
Jul 27, 2010
Does anybody know how to start the Process to add a new Language(Locale & Fonts) to the Android? How google manages this. How google decides this? Who decides this? Who can I contact?
View 5 Replies
View Related
Sep 23, 2010
I have started to port Android on TCC89XX board, I download Android SDK. and applied the patch with kernel 2.6.29, the Processor is having armv6 instruction set. I am not able to see the network up ifconfig is not able to show the network devices.
Also I do not get why there is no "on" binary in the system/bin, system/xbin, the init.rc and init.goldfish.rc. I cannot get the zygote process up. create_socket throws error.If any one knows about this, please tell what I need to do correctly or point me to some correct URL's.
View 3 Replies
View Related
Jul 12, 2009
I am trying to retrieve all applications that are running on the android phone. Following is the code I have wrote, but how do I get the application name into my Array items?
Context context = getApplicationContext(); Resources appR = context.getResources();
ActivityManager actmgr=(ActivityManager)context.getSystemService (Context.ACTIVITY_SERVICE);
List<RunningAppProcessInfo> appList = actmgr.getRunningAppProcesses();
CharSequence[] items = new CharSequence[appList.size()];
Vector <Process>allProcesses = new Vector <Process>();
for (int i=0;i<appList.size();i++) {
RunningAppProcessInfo rti = (RunningAppProcessInfo)appList.get (i);
Process p = new Process (rti.pid,rti.processName,rti.pkgList);
allProcesses.add(p); items[i] = p.getProcessName(); } : : :
View 2 Replies
View Related
Apr 26, 2010
If an application begins a Service via bindService or startService, will this Service object ever run from a process different from that of the application? I ask because many Android example projects begin a service and communicate to them using IPC which seems wholly unnecessary considering that, according to the Android Service documentation, "... services, like other application objects, run in the main thread of their hosting process." IPC, AIDL, and the IBinder interface only seem useful if connecting to a Service started by an application other than your own. Is this a correct or fair understanding?
View 1 Replies
View Related
Apr 22, 2009
For some reason I can't explain, when my app runs, I will on occasion get the following error message: "The application xxxxxxxx (process xxxxxx) has stopped unexpectedly. Please try again". When I debug my code, it seems to break at random places that doesn't make sense. On top of that I tried to surround the entire code with a try/catch block just to try to catch the exception, but it doesn't work either. I'm suspecting it's the OS that is producing this error message but I don't know why. As far as my code goes, if there were exceptions caused by it, it would've been caught by the try/catch block. Can someone shed some light here?
View 13 Replies
View Related
Jan 14, 2010
I am seeing a curious behaviour in my app. I have a widget that gets updated by a service every # hours, when the service finishes I stop it, using "stopService(new Intent(this, MyService.class));", the widget if pressed launches an Activity. Now it gets interesting, while im on the activity everyting works fine, then when I exit the app(by the back key or a button I designed which simply calls this.finish() ) the ActivityManager would tell me that my process has died, I do not see any error of any kind, just that the process has died.
Why I am seeing that message and what does it mean exactly? That is having a side effect on my service regarding static variables getting set to default. Could my code be the cause of this? Is there any way to know that your process has died? I have tested my app on a HTC Hero running 1.5, it always works well on the emulator and I never get that message. I know android kills processes to reclaim memory but Im always careful to close apps heavy on resources.
View 4 Replies
View Related
Aug 5, 2010
Is android's memory 16MB limit per Process or Application? If the limit is by process, I can make some services remote. That means the service will be in different processes, and the limit will be 16 x N.
View 3 Replies
View Related
Mar 15, 2010
Being interested in Android development and still in the experimentation phase - there's something I haven't been able to grasp. As far as I've been able to understand, the process lifecycle and application lifecycles are separate and as such, it would be possible for the application to still to exist, even if it's process has been killed. So I guess my question would be, in what scenario could this occur and how is the application accessible if the containing process has been killed?
View 5 Replies
View Related
Oct 31, 2010
In a comment on an epic StackOverflow question-and-answer, a gentleman who I will call Tim has outlined a scenario he says he is running into, one I have some difficulty believing. Reading somewhat between the lines, the flow would appear to be this:
1. User taps on an activity icon in the launcher 2. Process starts up 3. Application object is put in that process -- and a custom Application object loads an NDK library which initializes some statics/singletons 4. User uses application 5. User abandons application (e.g., HOME) 6. Later, user returns to application, before the first process is killed or recycled for use with another app 7. A second Application object is created, in the same process, before the first Application object is called with onTerminate()
This screws things up for Tim's app -- apparently, it does not deal with pre-initialized statics/singletons well. They were presumably counting on onTerminate() to let them clean up the NDK space. As a result, they are relying upon killProcess() (somehow...unclear under what conditions they might call this) to force their own process to go away, so their statics get cleaned up. Step #7 is what confuses me. I can see a new Application object being created, but only if the first Application object were terminated. I don't see any NDK-related bugs out on b.android.com that seem to match this complaint, though in principle it might cause problems for non-NDK apps as well. Has anyone encountered a new Application object being created in a process before the old one is terminated?
View 16 Replies
View Related
Jul 12, 2010
Well I've finally had a problem crop up that I can't solve in my XTR 2.1.1: This morning upon booting up my phone, a force close applet appeared just after the lock screen, "com.google.process.gapps can't start.. blah" and the force close button. Everything seems to work fine, gmail, calendar etc. Just that annoying error message only when I reboot. A search here found that same issue in many different devices, including the Droid, but with no solutions offered other than a reflash. I'd like to know what caused it all of a sudden; this has been a very stable ROM. I know that all I have to do to make the issue go away is flash my recovery image, but I don't want to do that before finding a solution to this for future reference.
View 5 Replies
View Related
Apr 9, 2009
After long running the Media|Player (audio mode) the app I'm developing often crashes w/ the following error: > Process android.process.media (pid 14795) has died. > Killing <my app> because provider com.android.providers.media.MediaProvider is in dying process android.process.media
View 3 Replies
View Related
Nov 4, 2008
One of the winners of the Google app contest was Jigsaw by Mikhail Ksenzov, an app to capture and process whiteboard data. The app isn't in the market, and I can't find anything via Google about it's status. Is it still beta, or what?
View 1 Replies
View Related
Jun 24, 2010
I have been struggling with uploading my application to android market. I keep getting the same old "The server could not process your apk. Try again.". I tried for hours to change and modify my AndroidManifest.xml file but no luck.
Here is my my AndroidManifest.xml:
CODE:............
View 2 Replies
View Related
Sep 1, 2010
When a try to deploy my android App in the emulator, after the application(.apk) gets loaded in to the emulator, when I tap on the menu button in emulator for loading my application's initial screen, its is raising me a alert message with this information:
<pre>Sorry Application Keyboard in Process (Force Quit / Wait)..</pre>
and some other similar messages too..
How can I avoid this issue that is happening at all time, When this happens, unless I tap on Wait button, I can't able to proceed.
View 1 Replies
View Related
Mar 2, 2010
I have develop some application using sending sms" when I try sending sms show up " The Application xxx(Process com. Bhn.xxx)has stoped unexpectedly
Any body knows , about that error ?
View 2 Replies
View Related
Sep 15, 2010
Camera application process dies and restarts again when device is Locked/End Call Key is clicked. Steps to reproduce: 1) Launch Camera application. 2) Click on End Call key(it acts as lock screen when there is no active call) or wait till device is locked. 3) Camera application is paused and surfaceDestroyed callback is not being called. 4) Camera process has died and restarted again. I would like to know why Camera process has died after onPause is being called and restarted again when device is put to Lock state. For all key events like BackKey,HomeKey and Accept Key it is working fine.
View 4 Replies
View Related
May 21, 2010
Sometimes the DDMS in the Eclipse not listing the process.
To do the debug in this condition,
1) Is their any way force the DDMS to list the process?
2) Any command to attach the process from the command line?
View 2 Replies
View Related
Feb 21, 2009
At a certain point in my program, when I'm completely done with my service, my activity executes unbindService() and stopService() -- yet the process persists. I can tell that it persists because I run "ps" in "adb -e shell":
CODE:.............
"adb logcat", I can show you the sequence of events:
ACTIVITY: context.unbindService(serviceConnection);
SERVICE: onUnbind();
ACTIVITY: stopService(serviceIntent); & returns true!
SERVICE: onDestroy();
First, my activity calls unbindService(serviceConnection). According to the documentation, unbindService() will "Disconnect from an application service. You will no longer receive calls as the service is restarted, and the service is now allowed to stop at any time." So that is fine, and it is happening.
Appropriately, we see the onUnbind() call happen on the service side. According to the documentation, onUnbind() is called when "all clients have disconnected from a particular interface published by the service." So this confirms the correct service connection is being passed, and that the service is responding accordingly.
Next, my activity calls stopService(serviceIntent), and returns true. According to the documentation, stopService() does the following: "If there is a service matching the given Intent that is already running, then it is stopped and true is returned; else false is returned." Again, this is happening and returning true.
In response, the service's onDestroy() method is called. According to the documentation, onDestroy() is "Called by the system to notify a Service that it is no longer used and is being removed. The service should clean up any resources it holds (threads, registered receivers, etc) at this point. Upon return, there will be no more calls in to this Service object and it is effectively dead."
At this point I expect the process to disappear from the process table. Yet it remains indefinitely. But why?
Also, the process is so persistent that I can bind to it again, and I see that it is the same exact process responding because the PID (process ID) is the same!
View 4 Replies
View Related
Nov 24, 2010
So, I decided to give Tridents ROM a try about 10-minutes ago.
I used ROM Manager, backed-up my old ROM, then downloaded Velocity 0.2.
Now, my phone will do nothing, it turns on and shows the red Droid eye, then when it's time to go to the home screen I get pop-up after pop-up saying that "The process com.android.phone has stopped unexpectedly. Please try again."
I have no way of getting on my phone at all, what can I do?
View 11 Replies
View Related
Jun 23, 2010
I seem to get this error message when I turn on the phone after powering off. I get to click "force close" and then it seems to work ok. "The application HTC Sense (process com.htc.launcher) has stopped unexpectedly."
View 7 Replies
View Related
Nov 12, 2010
I Just installed a new theme (Live Wire) for my Lithium Mod Rom. Don't know if there is a connection, but when I need to update an app, I get the message something like "process android media process stopped unexpectedly" and it will not allow the update. Everything else works well. I have turned it off for awhile, and have done a battery pull.
View 1 Replies
View Related
May 11, 2010
Every 5 minutes this error pops up "Sorry! the process android.process.acore has stopped unexpectdly. please try again." It doesnt actually close anything. It pops up even when im not in an app. So it's more annoying than anything.
View 3 Replies
View Related
Oct 9, 2009
How can I start a new application on Android? I have done a new applications NewHomeScreen and Hello and on NewHomeScreen I wrote this code.
CODE:............
However, it does not start Hello application. Debugger says that state has value null but what should it be? I also wrote this to Manifest:
CODE:....................
View 4 Replies
View Related
May 1, 2009
I would like to know if anybody knows how I can start my application with an incoming SMS message.
For example, I send an SMS message from phone A to Phone B. When Phone B receives the message, it checks if it is sent to my program. If it is, it starts(run) my application. Important thing here is that my program is not running in the device unless SMS is received, so it can not be listening for SMS itself.
View 7 Replies
View Related
Nov 23, 2010
Situation: Second day of owning X8. So I'm downloading some Apps and one of them took forever, the download arrow was showing activity all through the night. (I was on WiFi) This morning, I pull down the Activity bar and see that the phone thinks the Download is still continuing. I couldn't see anyway to force quit other than turning off the phone. So, how does one Kill an Activity, Application, or Process in this Android system?
View 4 Replies
View Related
